SMT30C-12SADJJ

SMT30C Series 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 1 NEW Product 30 A current rating Input voltage range: 10.2 Vdc - 13.8 Vdc Output voltage range: 0.9 Vdc - 5.0 Vdc Industry leading value Cost optimized design Excellent transient response Output voltage adjustability Pathway for future upgrades Supports silicon voltage migration Resulting in reduced design-in and qualification time Designed in reliability: MTBF of > 4 million hours per Telcordia SR-332 Available RoHS compliant The SMT30C series is a new high density open-frame, non-isolated converter for space sensitive applications. SMT30C has a wide input range of 10.2 Vdc to 13.8 Vdc and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 30 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiency is 91%. The series offers remote ON/OFF and over-current protection as standard. With full international safety approvals including EN60950 and Ul/cUL60950, the SMT30C 2 YEAR WARRANTY reduces compliance costs and time to market. All specifications are typical at nominal input Vin = 12 V, full load at 25 C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS (CONTD.) Voltage adjustability (See Note 1) 0.9-5.0 Vdc Turn ON threshold 9.0 Vdc typ. Turn OFF threshold 7.6 Vdc typ. Output setpoint accuracy 1.0% trim resistors 3% GENERAL SPECIFICATIONS Line regulation Low line to high line 0.2% max. Efficiency 91% typ. Load regulation Full load to min. load 1.0% max. Switching frequency Fixed 300 kHz typ. Min/max load 0 A/30 A Approvals and (See Note 7) TV Product Services Overshoot At turn-on 1.0% max. standards IEC60950, UL/cUL60950 Undershoot At turn-off 100 mV max. Material flammability UL94V-0 Ripple and noise (See Note 2) 50 mV pk-pk Weight 28.3 g (1 oz) 5 Hz to 20 MHz 15 mV rms Coplanarity 150 m Transient response 75 mV max. deviation (See Note 3) 150 s recovery to MTBF Telcordia SR-332 4,456,655 hours within regulation band Current share Full load 10% ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, 0 C to +80 C INPUT SPECIFICATIONS (See Note 8) temperature Input voltage range Nominal 12 V 10.2-13.8 Vdc Non-operating -40 C to +125 C Input current Minimum load 230 mA PROTECTION Remote OFF 30 mA Short-circuit Foldback, non-latching Input current (max.) (See Note 4) 13.8 A max. Io max. Over-temperature Hiccup, non-latching and Vin = 10.8 V Input reflected ripple (See Note 2) 150 mA (pk-pk) RECOMMENDED SYSTEM CAPACITANCE Remote ON/OFF Input capacitance (See Note 9) 270 F/20 m ESR max. Logic compatibility Positive logic Output capacitance (See Note 9)2 x 680 F/10 m ESR max. ON >2.4 Vdc OFF <0.8 Vdc Start-up time Power-up <30 ms (See Note 5) Remote ON/OFF <30 ms File Name: smt30c.pdf Rev (04): 16 Dec 2005SMT30C Series 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER CURRENT CURRENT (11,12) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 150 W 10.2-13.8 Vdc 0.9-5.0 Vdc 0 A 30 A 91% 0.2% 1.0% SMT30C-12SADJJ Part Number System with Options SMT30C-12SADJJ (11) Product Family Packaging Options SMT = Surface Mount J = Pb-free (RoHS 6/6 compliant) Rated Output Current Number of Outputs 30 = 30 A SADJ = Single Adjustable Output Performance Input Voltage C = Cost Optimized 12 = 10.2 Vdc to 13.8 Vdc OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee SSMMTT3300CC SSeerriieess The ultra-wide output voltage trim range offers major advantages to users who select the SMT30C. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT30C converter leaves the factory the output has been adjusted to the default voltage of 0.9 V. NNootteess 1 Uses external resistor from TRIM to ground. See Application Note 170 for details. 2 Measured with external filter. See Application Note 170 for details. 3 di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.50 lo max. to 0.75 lo max, and vice versa. 4 External input fusing recommended. 5 Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3 m in length. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 See Application Note 170 for operation above 50 C. 9 See Application Note 170 for more details. 10 For redundant current sharing applications that use ORing diodes to separate the outputs, please add the suffix -S to the part number, e.g. SMT30C-12SADJ-SJ. Please refer to Application Note 170 for further details. 11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at