Model XC1400P-03S Rev D Hybrid Coupler 3 dB, 90 Description The XC1400P-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for GPS band applications. The XC1400P-03S is designed particularly for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance is required. It can be used in high power applications up to 40 Watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, and RO4350. Produced with 6 of 6 RoHS compliant tin immersion. Electrical Specifications ** Features: Amplitude Frequency Insertion Loss VSWR Balance 1200 1600 MHz GPS MHz dB Max Max : 1 dB Max High Power 1200-1600 0.32 1.20 +/-0.30 Very Low Loss 1215-1240 0.23 1.17 +/-0.30 Tight Amplitude Balance 1563-1588 0.32 1.20 +/-0.30 High Isolation Operating Phase Isolation Power Production Friendly Temp. Tape and Reel Avg. CW Watts Degrees dB Min C Lead-Free o 85 C Reliable, FIT=0.49 90 4.0 23 30 -55 to +150 90 3.0 23 40 -55 to +150 90 4.0 23 30 -55 to +150 **Specification based on performance of unit properly installed on Anaren Test Board 54147-0001 with small signal applied. Specifications subject to change without notice. Refer to parameter definitions for details. Top View (Near-side) Side View Bottom View (Far-side) .107 .021 4x .020.004 2.72 0.54 0.510.10 .250 .010 6.35 0.25 PIN 1 PIN 2 GND PIN 2 PIN 1 4x .020.004 0.510.10 ORIENTATION MARKER DENOTES .200 .010 .120 .010 XC1400P- PIN 1 5.08 0.25 3.05 0.25 4x .034.004 SQ 03S 0.860.10 GND PIN 3 PIN 4 PIN 3 .170 .010 PIN 4 DENOTES 4.32 0.25 ARRAY NUMBER Dimensions are in Inches Millimeters Tolerances are Non-Cumulative XC1400P-03S Mechanical Outline Rev D USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Toll Free: (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Model XC1400P-03S Rev D Hybrid Coupler Pin Configuration The XC1400P-03S has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 Splitter Input Isolated -3dB -3dB 90 Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Note: A is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port. USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392