C3A50Z4

Model C3A50Z4 Rev A PRELIMINARY Surface Mount RF Termination 3 Watts, 50 Description The C3A50Z4 is high performance Alumina (Al2O3) surface mount termination intended as a low cost alternative to Aluminum Nitride (AlN). The termination is well suited for 3G, 4G & 5G Systems and is also RoHS compliant. General Specifications Resistive Element: Thick Film Features: Substrate: Al O Ceramic 2 3 RoHS Compliant Terminal Finish: Matte Tin over Nickel Barrier 3 Watts Operating Temperature: -55 to +150C (see de-rating curve) Tolerance is 0.010, unless otherwise specified. Designed to meet or exceed applicable Al O Ceramic 2 3 portions of MIL-E-5400. All dimensions in inches. Non-Nichrome Resistive Electrical Specifications Element Impedance: 50 Ohms Low VSWR Power: 3 Watts 100% Test Max Frequency: 6.0 GHz Return Loss: Small Size >18 dB Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing Top View Side View Bottom View 2X .046 .013.003 Input .017 Ground .080.005 2X .004 .040 .050.005 2X .025 Unless otherwise specified, dimensions are in inches USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Toll Free: (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Model C3A50Z4 Rev A Typical Performance: Power De-rating: Mounting Footprint: 0.066 1.68 0.029 0.74 ORIENTATION MARKER 0.023 0.58 Copper / GND Recommended Mounting Footpring for 30 mil thick, Dk 3.48 PCB USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392