LTC7000/LTC7000-1 Fast 150V Protected High Side NMOS Static Switch Driver FEATURES DESCRIPTION n Wide Operating V : 3.5V to 135V (150V Abs Max) The LTC 7000/LTC7000-1 is a fast high side N-channel IN n 1 Pull-Down, 2.2 Pull-Up for Fast Turn-On and MOSFET gate driver that operates from input voltages up Turn-Off Times with 35ns Propagation Delays to 135V. It contains an internal charge pump that fully n Internal Charge Pump for 100% Duty Cycle enhances an external N-channel MOSFET switch, allowing n Short-Circuit Protected it to remain on indefinitely. n Adjustable Current Trip Threshold (LTC7000) Its powerful driver can easily drive large gate capacitances n Current Monitor Output (LTC7000) with very short transition times, making it well suited for n Automatic Restart Timer both high frequency switching applications or static switch n Open-Drain Fault Flag applications that require a fast turn-on and/or turn-off time. n Adjustable Turn-On Slew Rate n When an internal comparator senses that the switch Gate Driver Supply from 3.5V to 15V n current has exceeded a preset level, a fault flag is asserted Adjustable V Undervoltage and Overvoltage IN and the switch is turned off after a period of time set by Lockouts (LTC7000) n an external timing capacitor. After a cooldown period, the Adjustable Driver Supply V Undervoltage Lockout CC n LTC7000/LTC7000-1 automatically retries. Low Shutdown Current: 1A n CMOS Compatible Input The LTC7000/LTC7000-1 is available in the thermally- n Thermally Enhanced, High Voltage Capable 16-Lead enhanced 16-lead MSOP packages. MSOP Packages LTC7000 LTC7000-1 n AEC-Q100 Qualified for Automotive Applications Package 16-Lead MSOP 16-Lead MSOP MSE16 MSE16(12) APPLICATIONS High Voltage Pin Spacing 0.157mm 0.657mm n Static Switch Driver RUN/OVLO/I /I Pins Yes No SET MON n Load and Supply Switch Driver All registered trademarks and trademarks are the property of their respective owners. n Electronic Valve Driver n High Frequency High Side Gate Driver TYPICAL APPLICATION High Side Switch with 100% Duty Cycle and Overcurrent Protection Turn-On Transient Waveform V IN 3.5V TO 135V V = 135V IN + V SNS IN V CC 0.007 V INP LTC7000-1 100 2V/DIV 1F 100k SNS FAULT TGUP TIMER TGDN V LOAD 1nF OFF ON INP BST 50V/DIV 0.1F LOAD V TS 3.5V TO 135V CCUV GND 3A CONTINUOUS MAX 7000 TA01b 7000 TA01a 20ns/DIV Rev. E 1 Document Feedback For more information www.analog.comLTC7000/LTC7000-1 TABLE OF CONTENTS Features ............................................................................................................................ 1 Applications ....................................................................................................................... 1 Typical Application ............................................................................................................... 1 Description......................................................................................................................... 1 Absolute Maximum Ratings ..................................................................................................... 3 Pin Configuration ................................................................................................................. 3 Order Information ................................................................................................................. 3 Electrical Characteristics ........................................................................................................ 5 Typical Performance Characteristics .......................................................................................... 7 Pin Functions ...................................................................................................................... 9 Block Diagram ....................................................................................................................10 Timing Diagram ..................................................................................................................11 Operation..........................................................................................................................11 Applications Information .......................................................................................................13 Package Description ............................................................................................................27 Revision History .................................................................................................................29 Typical Application ..............................................................................................................30 Related Parts .....................................................................................................................30 Rev. E 2 For more information www.analog.com