12-Bit, 6 GSPS/10.25 GSPS, RF Analog-to-Digital Converter Data Sheet AD9217 FEATURES GENERAL DESCRIPTION High instantaneous dynamic range The AD9217 is a single, 12-bit, 6 GSPS/10.25 GSPS, radio NSD frequency (RF) analog-to-digital converter (ADC) with a 6.5 GHz 155.1 dBFS/Hz at 10 GSPS with 9 dBFS, 170 MHz input input bandwidth. The AD9217 supports high dynamic range 153 dBFS/Hz at 10 GSPS with 1 dBFS, 170 MHz input frequency and time domain applications requiring wide SFDR: 70 dBFS at 10 GSPS with 1 dBFS, 1000 MHz input instantaneous bandwidth and low conversion error rates (CER). SFDR excluding H2 and H3 (worst other spur): 89 dBFS at The AD9217 features a low latency, high speed, parallel CML 10 GSPS with 1 dBFS, 1000 MHz input output interface that supports full bandwidth operation Low power dissipation: 4.2 W typical at 10 GSPS with compatible FPGA/ASIC receivers. The AD9217 can be Integrated input buffer (6.5 GHz input bandwidth) reconfigured to operate in native AD9213 mode for applications 1.4 V p-p full-scale analog input with R = 50 IN requiring additional digital processing and JESD204B output Overvoltage protection support. Refer to the AD9213 data sheet when operating the Low latency, high speed parallel output port AD9217 in AD9213 mode. Fast overrange detection for efficient AGC The AD9217 achieves dynamic range and linearity performance On-chip temperature sensor while consuming 4.2 W typical. The device is based on an On-chip negative voltage generators 16 interleaved pipeline architecture and features a proprietary Low CER: <1 10 calibration and randomization technique that suppresses Reconfigurable support for AD9213 native mode interleaving spurious artifacts into its noise floor. The linearity 12 mm 12 mm, 192-ball BGA-ED package performance of the AD9217 is preserved by a combination of on-chip dithering and calibration, which results in excellent spurious-free performance over a wide range of input signal conditions. The AD9217 is offered in a 192-ball ball grid array (BGA) package and is specified over a junction temperature range of 20C to +115C. FUNCTIONAL BLOCK DIAGRAM AVDD2 AVDD DVDD JVDD2 JVDD (2.0V) (1.0V) AGND (1.0V) (2.0V) (1.0V) JGND 2 DIGITAL AVNN1 AD9217 GAIN (1.0V) DOUTx 0 BUFFER DOUTx 1 14 12 VIN P ADC DIGITAL CORE VIN N DOUTx 11 VCM DCOx PARITYx FD SIGNAL MONITOR CLOCK DISTRIBUTION DGND CLK P CLK N GPIO SPI ASSIGNMENT CONTROL SVDD2 (2.0V) CLKVDD LF GPIO 0 TO GPIO 4 SDIO SCLK CSB (1.0V) Figure 1. For more information about the AD9217, contact the Analog Devices, Inc., High Speed Converters Group at highspeed.converters analog.com. Rev. Sp0 Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 2020 Analog Devices, Inc. All rights reserved. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Technical Support www.analog.com Tx OUTPUTS 22143-001AD9217 Data Sheet NOTES 2020 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D22143F-2/20(Sp0) Rev. Sp0 Page 2 of 2