PCIe-CPL64

PCIe-CPL64 2-CH PCI Express PoCL Frame Grabber Features PCI Express x4 compliant Supports 2-CH Camera Link Base configuration Acquisition pixel clock rates up to 85 MHz PoCL (Power over Camera Link ) safe power compliant with auto detection 128 MB of 200 MHz DDR SDRAM for acquisition 4 TTL Digital Input/Output, and 2 trigger Input Supports 64-bit memory addressing Two serial communication ports Introduction Software Support The PCIe-CPL64 is a PoCL (Power over Camera Link ) frame grabber OS Information that is based on the PCI Express x4 interface, and supports Windows 7/XP two-channel Camera Link base configurations, multi-tap area Software Compatibility and line scan cameras. The PCIe-CPL64 frame grabber strikes a C /.NET/VC++/VB/C++ Builder/Delphi perfect balance between performance and cost. It is capable of Sample program included simultaneously image acquisition from two completely independent Software Recommendations Camera Link base configuration cameras, and supports image TM transfer rates up to 512 MB/s. ADLINK CamCreator PoCL Technology Applications The PoCL (Power over Camera Link ) standard allows the camera PCB/FPD/Wafer/Solar Cell surface inspections link cable to supply power to the camera through the Camera Link Medical research instrumentations connector without losing backward compatibility with the previous Camera Link standard, this solution is particularly suitable for a Ordering Information small camera. PCIe-CPL64 Benefits of PoCL 2-CH PCI Express x4 PoCL frame grabber Easy installation Reduce wiring (Single cable for digital I/F, and power) Reduce camera sizeSpecifications Model Name PCIe-CPL64 Form Factor PCI Express x4 compliant Camera Link LVDS deferential signals Dual Base Configuration: Using two MDR26 pins connectors Video Input Maximum camera link data rate: 85 MHz Supports PoCL and standard Camera Link interface and auto detect Camera Control Camera control: CC1 to CC4 control signal in two MDR26 pins connectors 1 External RS422 level ABZ phase deferential signal for encoder input 2 channels TTL level Line /Area trigger input 2 channels TTL level Line trigger start input External Signal Input 2 channels TTL level exposure output Line trigger bypass output (encoder mode only) 4 channels digital input 4 channels digital output Power line output per channel : DC +12 V max 1 A Power over Camera Link (PoCL) Over-current Protection function, auto detect when non-PoCL cable or PoCL camera connected. 0C to +50C (32F to 122F) Operating Environment Humidity: 5% to 90% RHNC Temperature: 0C to 70C (32F to 158F) Storage Environment Humidity: 0 to 95% RHNC +12 V max 0.5 A Power Requirements +3.3 V max 1.6 A Dimensions 167.65 mm x 111.15 mm (6.53 x 4.33) (W x L) www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Sep. 27, 2017. 2017 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.