SMD OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY Series
RoHS/RoHS II compliant
Pb
25.4 x 22.1 x 12.7 m m
| | | | | | | | | | | | | | |
Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = 1
FEATURES: APPLICATIONS:
Cellular Infrastructure
25.4 x 22.1 x 12.7 mm True SMT- RoHS Compliant Reflow-able Package
SC-Cut, High Q resonator based design Radar Systems
Either Sinewave or CMOS RF output
Test & Measurement Equipment
Available with 30 ppb over -40C to +75C operating temperature Range
GPS Tracking with precision hold-over accuracy
Tighter Stabilities to 5.0 ppb over 0C to +50C also available
WiMax / WLAN
Exceptional long-term Aging of 500 ppb over 10-Year Product Life
Excellent close-in phase noise (-135 dBc/Hz Typical @100 Hz offset from 10MHz carrier)
STANDARD SPECIFICATIONS:
Parameters Minimum Typical Maximum Units Notes
RF Output
10.00 100.00 MHz CMOS output
Frequency
10.00 100.00 MHz Sinewave output
10.00, 12.80, 13.00, 16.384, 20.00, 26.00, 38.40,
Standard Available Frequencies
38.88, 40.00, 100.00 MHz
Operable Temperature Range 0 50 C See Stability Options
Frequency Stability Options
0 C to +50C 5.00 ppb Default Spec.
-20 C to +70C 10.00 ppb Option E
-40 C to +75C 30.00 ppb Option F
Frequency Stability vs. Supply
20.00 ppb
Voltage (Vdd 5%)
100.00 ppb In < 3-minutes
Warm-Up @ 25 C
Power Consumption @ turn on 3.60 Watts
Power Consumption Steady State 1.40 Watt
Supply Voltage (Vdd) 3.135 3.30 3.465 Volts See Options
2.60 2.80 3.00 Volts For Vdd=+3.3V version
Reference Voltage (Vref)
(available as an output to facilitate oscillator tuning)
4.30 4.50 4.70 Volts For Vdd=+5.0V version
Aging
Daily aging (after 30 days) 1.0 ppb
Yearly 100 ppb
10-Years 500 ppb
Waveform LVCMOS
Level1" (Logic High) 0.9*Vdd Volts
Level0" (Logic Low) 0.1*Vdd Volts
Load 15 pf
Rise & Fall Time 5.0 ns
Duty Cycle 45 55 %
Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13
ABRACON IS
ABRACON IS
30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688
ISO9001:2008
CERTIFIED
CERTIFIED tel 949-546-8000 | fax 949-546-8001| ww w .abrac on.c omSMD OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY Series
RoHS/RoHS II compliant
Pb
25.4 x 22.1 x 12.7 m m
|||| | | | | | | | | | | |
STANDARD SPECIFICATIONS contd.
Parameters Minimum Typical Maximum Units Notes
Waveform Sinewave
Peak Power 2.00 dBm
Output Load 50
Spectral Content
Spurious Response -70 dBc
Phase Noise @ 10MHz Carrier
(Vdd=3.3V)
@ 1 Hz offset -90 dBc / Hz
@ 10 Hz offset -120 dBc / Hz
@ 100 Hz offset -135 dBc / Hz
@ 1,000 Hz offset -145 dBc / Hz
@ 10,000 Hz offset -150 dBc / Hz
@ 100,000 Hz offset -150 dBc / Hz
@ 1,000,000 Hz offset -150 dBc / Hz
Electrical Frequency Adjustment
Control Voltage Range (Vc) 0.0 Vdd Volts
Frequency Pull Range 0.7 ppm
Frequency Pull Slope Positive
Control Voltage Port Impedance 10 k
Center Control Voltage (Vdd/2) -0.5 Vdd/2 (Vdd/2) +0.5 Volts
OPTIONS AND PART IDENTIFICATION (Left blank if standard)
AOCJY - - MHz - -
Supply Voltage Option
Frequency in MHz Temperature Options RF Output Options
Blank: 3.30V5% Such as; 10.000 MHz
Blank: 5.0ppb/0C to+50C Blank: CMOS
A: 5.00V5% 26.000 MHz
E: 10.0ppb/-20C to +70C SW: Sinewave
100.000 MHz
F: 30.0ppb/-40C to +75C
OUTLINE DIMENSIONS
Recommended Soldering Pattern
Pin Function
1 Control Voltage
2 VREF
3 Supply Voltage
4 RF-output
5 Ground. Case
Dimensions: Inches (mm)
Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13
ABRACON IS
ABRACON IS
30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688
ISO9001:2008
CERTIFIED
CERTIFIED tel 949-546-8000| fax 949-546-8001| ww w .abrac on.c om