Specialty Terminals W 72F-110-20-P Female Disconnect, Vinyl Insulated, Butted Seam L Data Sheet Wire Maximum Range Mates with Male Tab Barrel Barrel Insulation Product Number (AWG)WLidth (W ) x Thickness Length I.D. Diameter 0.110 x 0.020 742F-110-20-P 16-1 09.8105.105.11 0.14 0.125 x 0.020 Specifications Installation Information Wire Size: See Table Above Barrel Seam: Butted WARNING Maximum Operating Temp: 221F (105C) Turn power off before installing or removing terminal. All electrical Maximum Current: Same as Wire work should be done according to appropriate electrical codes. Insulator Material: Vinyl Terminal Material: Brass For use on stranded copper wire only. Plating: Tin Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style) or TR-490 (ratchet style) hand tools. Barrel Crimp (Electrical)Engineering Specification Crimp-Type Female Disconnect Terminals shall, The Vinyl Insulated Miniature 0.110 Female electrically and mechanically, connect permanently to Disconnect shall be tin plated 0.010 thick brass with a a prestripped end of a stranded copper wire, and have a tongue for gripping a 0.110 or 0.125 male tab of tongue portion with fingers which grip a Male 0.020 thickness and with a 0.19 long barrel covered Disconnect in a separable, reusable manner, forming a by a molded vinyl sleeve, color coded and sized for a Quick Connect Wiring Termination. specified (AWG) wire range (16-14). The connector line shall offer tongue variations (sized to grip Male Tabs: 0.110 x 0.020 or 0.110 x 0.032 per ANSI/NEMA CD-2) and barrel variations construction, non-insulated, vinyl insulated with insulation grip, nylon fully insulated, etc. The tongue portion shall be marked with the wire range and manufacturers name or trade mark ( ). 3M is a trademark of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-5532-8-A