WW04PR400FTL Walsin

Approval sheet WW04P 1%, 5% Low ohm power chip resistors Size 0402(1005) *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC WW04P V01 Mar.2011 Approval sheet FEATURE 1. High power rating and compact size 2. High reliability and stability 3. Reduced size of final equipment 4. Lead free product is upon customer requested. 5. Current sensing resistor APPLICATION PDA Cable Modem Battery charger DC-DC power converter DESCRIPTION The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a Tin (lead free) alloy. Fig 1. Consctruction of Chip-R Page 2 of 6 ASC WW04P V01 Mar.2011