WF10P6801FTL Walsin

Approval sheet WF10P 1%, 5% General purpose chip resistors ( power ) Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC WF10P V09 Jul.2010 Approval sheet FEATURE 1. High reliability and stability 2. Reduced size of final equipment 3. Lower assembly costs 4. Higher component and equipment reliability 5. RoHS compliant and Lead free products APPLICATION Consumer electrical equipment Automotive application EDP, Computer application Telecom application DESCRIPTION The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a Tin (lead free) alloy. Fig 1. Consctruction of Chip-R Page 2 of 7 ASC WF10P V09 Jul.2010