Product Information

CR-P2L/1BP

CR-P2L/1BP electronic component of Panasonic

Datasheet
BATTERY, PHOTO LITHIUM, CRP2P, 6V

Manufacturer: Panasonic
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)
N/A

Shipping Restricted
     
Manufacturer
Product Category
Battery Technology
Battery Capacity
Battery Voltage
Battery Size Code
Battery Terminals
External Diameter
External Height
External Width
External Depth
Weight
Battery Iec Code
Battery Neda Code
Product Range
Svhc
Depth
Discharge Current Max
External Length / Height
Output Voltage
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
CR-V3 electronic component of Panasonic CR-V3

Consumer Battery & Photo Battery 3V 3000mAH
Stock : 0

CR-V3A/1B electronic component of Panasonic CR-V3A/1B

Consumer Battery & Photo Battery Retail Packaging V
Stock : 0

CT2-C-30 electronic component of Panasonic CT2-C-30

Compact Connector 30 POS Carton
Stock : 2

CT2-C-40 electronic component of Panasonic CT2-C-40

Small Connector terminal
Stock : 0

CX-28-J electronic component of Panasonic CX-28-J

Compact Photoelectric Sensor
Stock : 7

CX-29-PN-Y electronic component of Panasonic CX-29-PN-Y

Photoelectric Sensor Retro-Reflective Light ON/Dark ON PNP 3m
Stock : 12

CT1-20 electronic component of Panasonic CT1-20

Low cost, Connector term
Stock : 1

CT1-40 electronic component of Panasonic CT1-40

Low cost, Connector term
Stock : 5

CX-29-Y electronic component of Panasonic CX-29-Y

Photoelectric Sensor Retro-Reflective Light ON/Dark ON NPN 3m
Stock : 0

CX-39B electronic component of Panasonic CX-39B

Photoelectric Sensor Retro-Reflective Dark ON NPN 2.5m
Stock : 0

Image Description
CRPFACCBK electronic component of CamdenBoss CRPFACCBK

KIT, ACCESSORIES FOR PIFACE ENCLOSURE
Stock : 0

9794-606-1000 electronic component of Belden 9794-606-1000

Multi-Conductor Cables 22AWG 4C UNSHLD 1000ft SPL GRY/ROSE
Stock : 1

KPA-2107LVSECK-J3-PRV electronic component of Kingbright KPA-2107LVSECK-J3-PRV

LED, RED, 30MCD, 625NM, SMD
Stock : 0

KPA-2107LVZGCK electronic component of Kingbright KPA-2107LVZGCK

LED, GREEN, 40MCD, 525NM, SMD
Stock : 0

2508.010 electronic component of Rittal 2508.010

WALL BRACKET, 10MM, PK4 Price is per individual piece not per pack/tube
Stock : 0

XB4BK124B5 electronic component of Schneider XB4BK124B5

ILLUM ROTARY SWITCH, 1POLE, 6A, 120VAC
Stock : 0

CRS05 electronic component of Toshiba CRS05

DIODE, SCHOTTKY, 1A
Stock : 0

ADA-4643-BLKG electronic component of Broadcom ADA-4643-BLKG

RF Amplifier DC - 2.5 GHz 17 dB
Stock : 0

430453025836 electronic component of Wurth 430453025836

Tactile Switches Tact Switch Wshble J-Bend SMT 2.5mm
Stock : 1988

CN2896-000 electronic component of TE Connectivity CN2896-000

Cable Accessories Label Vinyl White Spool
Stock : 38660

Product Information Sheet Panasonic Batteries Product: Poly- carbonmonofluoride Panasonic Industrial Company (BR Type) Lithium Batteries A Division Panasonic Corporation of North America Applicable models/sizes: Only our BR-C 5201 Tollview Drive, 1F-3 Rolling Meadows, IL 60008 type cylindrical battery. Toll Free: 877-726-2228 Revision: C, January 1, 2011 Fax: 847-637-4660 Internet: www.panasonic.com/batteries e-mail: oembatteries panasonic.com The batteries referenced herein are exempt articles and are not subject to the OSHA Hazard Communication Standard requirement. This sheet is provided as a service to our customers. MSDS Material Safety Data Sheets (MSDS) are a sub-requirement of the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard, 29 CFR Subpart 1910.1200. This Hazard Communication Standard does not apply to various subcategories including anything defined by OSHA as anarticl. OSHA has definedarticl as a manufactured item other than a fluid or particle (i) which is formed to a specific shape or design during manufacture (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use and (iii) which under normal conditions of use does not release more than very small quantities, e.g. minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees. Because all of our batteries are defined asarticle, they are exempt from the requirements of the Hazard Communication Standard hence a MSDS is not required. The following components are found in a Panasonic Poly-carbonmonofluoride (BR) Lithium battery: Cylindrical Cell Components Material Formula Positive Electrode Poly-carbonmonofluoride (CF) n Negative Electrode Lithium Li Electrolyte y-Butyrolactone -Solvent C H O 4 6 2 1,2 Dimethoxyethane-Solvent C H O 4 10 2 Lithium Tetrafluroborate-Salt LiBF 4 DISPOSAL Lithium batteries are neither specifically listed nor exempted from the Federal Environmental Protection Agency (EPA) hazardous waste regulations as promulgated by the Resource Conservation and Recovery Act (RCRA). The only metal of possible concern in a lithium battery is lithium that is not a listed or characteristic toxic hazardous waste. Waste lithium batteries can be considered a reactive hazardous waste if there is a significant amount of unreacted, or unconsumed lithium remaining in the spent battery. The key to disposing of a lithium battery as a non-hazardous waste is to guarantee that it is fully or mostly discharged. Once it is discharged it can be disposed of as non-hazardous waste. You can dispose of a fully charged or partially discharged lithium battery as a hazardous waste after they are first neutralized through an approved secondary treatment. The need for a secondary treatment prior to disposal is a requirement of the U.S. Land Ban Restrictions of the Hazardous and Solid Waste Amendments of 1984. A secondary treatment center can only receive these batteries as manifested hazardous waste. The waste code for charged lithium batteries is D003, reactive. In either case, button cell batteries contain so little lithium that they never qualify as a reactive hazardous waste. These batteries are safe for disposal in the normal municipal waste stream. Disposal of large quantities of undischarged lithium batteries should be performed by permitted, professional disposal firms knowledgeable in Federal, State and local hazardous materials and hazardous waste transportation and disposal requirements. As always, households are exempt from the RCRA hazardous waste guidelines. In California, packages that contain CR lithium coin cells and the Owners/Operating Instructions of products that contain CR lithium coin cells Notice: The information and recommendations set forth are made in good faith and are believed to be accurate at the date of preparation. Panasonic Industrial Company makes no warranty expressed or implied. 032-11 2 of 2 must include the following statement: Perchlorate Material special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchorate. The effective date for this Perchlorate label was July 1, 2006 for non- consumer products and January 1, 2007 for consumer products. TRANSPORTATION Effective October 1, 2008 Panasonic BR-C lithium batteries are not subject to the requirements of the Department of Transportation (DOT) Subchapter C, Hazardous Materials Regulations if shipped by ground in compliance with 49 CFR 173.185 and Special Provision 189. The DOT regulates our BR-C battery as a medium sized battery. One of the requirements of SP 189 is that the package of these batteries must be labeled: PRIMARY LITHIUM BATTERY FORBIDDEN FOR TRANSPORT ABOAD PASSENGER AIRCRAFT AND VESSEL. st According to ICAO, 2011-2012 edition, IATA, 51 edition and IMO regulations, 2010 edition the Panasonic BR-C battery must be shipped as a fully regulated Class 9 dangerous good. These regulatory agencies do recognize the concept of a DOT medium sized battery. If you build any of our lithium cells into a battery pack, you must also assure that they are tested in accordance with the UN Model Regulations, Manual of Test and Criteria. Part III, subsection 38.3. Effective December 29, 2004, the DOT requires that the outside of each package that contains primary lithium batteries, regardless of size or number of batteries, be labeled with the following statement: PRIMARY LITHIUM BATTERIES- FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT. The labeling requirement covers shipments via highway, rail, vessel or cargo-only aircraft and covers all shipments inside, into or out of the US. The label must be in contrasting color and the letters must be 12 mm (0.5 in) in height for packages weighing more than 30 Kg and 6 mm (0.25 in) in height for packages weighting less than 30 Kg. If you plan on transporting any untested prototype battery packs contact your Panasonic Sales Representative for regulatory information. First Aid If you get electrolyte in your eyes, flush with water for 15 minutes without rubbing and immediately contact a physician. If you get electrolyte on your skin wash the area immediately with soap and water. If irritation continues, contact a physician. If a battery is ingested, call the National Capital Poison Center (NCPC) at 202-625-333 (Collect) or your local poison center immediately General Recommendations O O CAUTION: Risk of fire, explosion and burns. Do not recharge, crush, heat above 212 F (100 C) or incinerate. Fire Safety In case of fire, you can use a Class D fire extinguisher or other smothering agent such as Lith-X, copper powder or dry sand. If you use water, use enough to smother the fire. Using an insufficient amount of water will only make the fire worse. Cooling the exterior of the batteries will help prevent rupturing. Burning of these batteries will generate toxic and corrosive lithium hydroxide fumes. Fire fighters should use self-contained breathing apparatus. Detailed information on fighting a lithium metal battery fire can be found in Guide 138 (Substances Water Reactive) of the US DOT Emergency Response Guide. Notice: The information and recommendations set forth are made in good faith and are believed to be accurate at the date of preparation. Panasonic Industrial Company makes no warranty expressed or implied. 032-11 2 of 2

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted