ABJ1412609

ABJ1,2,3,4,5 TURQUOISE SWITCHES HIGH ENVIRONMENTAL RESISTANCE ABJ TYPE FEATURES 6 Ultra-miniature size (12.86.56 mm) 12.8 6.5 Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap greatly reduces possible miscontact due to contaminants such as dust. Conforming to IP67* of IEC protective construction classication Dust protected type (Mounting hole Elastomer double molding technology, an industry rst and ultrasonic 2.3mm type) swaging technology contribute to uniform sealing in high production quantities UL/CSA approved (Except the long stroke type of ABJ2 and the side wire leads type.) Long stroke type is available Since the repeatability is excellent and the play distance (overtravel) from the operating position is ample, the task of performing adjustments during installation is easy. Immersion protected type (Mounting hole Operating position accuracy 0.4 mm (wire leads bottom type) 2.3mm type) Overtravel= Min. 2.0 mm As wide range of high pressure is achieved, a stable reliability is ensured Leaf lever side wire leads type added. We now offer two types. M3 type installation hole Fixed pin type TYPICAL APPLICATIONS Immersion protected Long stroke type Industrial use video jack (wire leads side type) Automotive (ex. Device for opening and shutting of automobile doors) * Based on the protective construction classication of IEC, items which satisfy the test requirements are denoted with an IP designation. Compliance with RoHS Directive ORDERING INFORMATION (If Agency standard required, please refer to the with Agency standard type. See next page.) Ex. ABJ 1 4 1 0 4 0 Operating force Type of Size of Contact Terminal Actuator by pin plunger Contact switch mounting hole arrangement (max.) ABJ: 1: 1.2 mm 4: Solder terminal 1: SPDT 0: Pin plunger 4: 1.23 N 0: AgNi alloy Turquoise 2: 2.3 mm 5: PC board terminal 2: SPST-NC 2: Hinge lever 6: 1.96 N 1: AgNi alloy switch 3: 3 mm 6: Wire leads (bottom type) (Wire leads 4: Simulated roller lever 7: 2.45 N + Au clad J type 4: Fixed pin 7: Wire leads (right side type) type only) 6: Roller lever (Long stroke (right side pin) type 8: Wire leads (left side type) 3: SPST-NO 8: Leaf lever type only) 5: Fixed pin (Wire leads (Mounting hole 3 mm (left side pin) type type only) lead wire type only) L: Long stroke type Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case Immersion protected type 50 pcs./case. 2. Not every combination is available. Please refer to the following table, PRODUCT TYPES. All Rights Reserved COPYRIGHT Panasonic Electric Works Co., Ltd.ABJ1,2,3,4,5 With Agency standard type Ex. ABJ 1 4 1 0 4 0 9 Type of Size of Contact Operating force by Agency Terminal Actuator Contact switch mounting hole arrangement pin plunger (max.) standard ABJ: 1: 1.2 mm 4: Solder terminal 1: SPDT 0: Pin plunger 4: 1.23 N 0: AgNi alloy 9: UL/CSA 3 Turquoise 2: 2.3 mm 5: PC board terminal 2: SPST-NC 2: Hinge lever 6: 1.96 N 1: AgNi alloy 6 10 switch 3: 3 mm 6: Wire leads (Wire leads 4: Simulated roller lever + Au clad rated J type (bottom type) type only) 6: Roller lever 3: SPST-NO 8: Leaf lever (Wire leads (Mounting hole 3 mm type only) lead wire type only) Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case Immersion protected type 50 pcs./case. 2. Not every combination is available. Please refer to the following table, PRODUCT TYPES. CONTACT ARRANGEMENT 1. SPDT 2. SPST-NC (Wire leads type only) 3. SPST-NO (Wire leads type only) COM NO NC COM NC COM NO APPLICABLE CURRENT RANGE (reference) 2A AgNi alloy 1A OF1.23N OF1.96N 100mA Au clad 1mA 0 DC 5V 15V 30V AC 5V 15V 125V Note) OF: Value of pin plunger All Rights Reserved COPYRIGHT Panasonic Electric Works Co., Ltd.