On-site Flexible Rod Switch TP70 CSM TP70 DS E 5 2 Easy on-site input on-the-move Incorporation of plastic rod actuator makes the Switch easy on hands. One-way operation: Equipped with stopper so that operation is only possible from one direction. Distinctive yellow used for the body. Three different types of mounting are available. Models with emergency-stop switch are available to suit the application. Be sure to read Safety Precautions on page 5 Model Number Structure Ordering Information Model Number Legend Name Mounting method Model Front mounting TP70-1A1 TP70 - On-site Flexible Rod Switch Base mounting TP70-1A2 (integrated switch only) (1) (2) (3) C-clamp mounting TP70-1A3 Front mounting TP70-1S1 On-site Flexible Rod Switch (1) Built-in Switch Model (with separable emergency- Base mounting TP70-1S2 stop switch) 1 : D4N-2187 C-clamp mounting TP70-1S3 (2) Function A : Integrated switch only S : With separable emergency-stop switch (3) Mounting Method 1 : Front mounting 2 : Base mounting (with height adjustment) 3 : C-clamp mounting (with height adjustment) 1TP70 Specifications Approved Standards Approved Standard Ratings CCC (GB14048.5) Agency Standard File No. CCC (CQC) GB14048.5 2013010305630198 Applicable category and ratings AC-15 3A/240V Ratings DC-13 0.27A/250V Current (A) Volt-amperes (V) Rated Carry voltage current Make Break Make Break 120 VAC 60 6 10 A 7,200 720 240 VAC 30 3 125 VDC 0.55 0.55 2.5 A 69 69 250 VDC 0.27 0.27 Characteristics Degree of protection *1 IP65 2 Vibration resistance Malfunction: 10 to 55 Hz, 0.65-mm single amplitude, 100 m/s max. 2 Destruction 1,000 m/s max. Shock resistance 2 Malfunction 20 m/s max. Ambient operating temperature 10C to +70C Operating environment Ambient operating humidity 35% to 95%RH Switch model D4N-2187 Allowable operating speed 1 mm/s to 0.5 m/s Mechanical 60 operations/min Allowable oper- ating frequency Electrical 30 operations/min (with resistive load) Built-in switch specifi- cations Mechanical 1,000,000 operations min. Durability *2 Electrical 200,000 operations min. (for a resistive load of 10 A at 125 VAC) Contact type SPST-NO+SPST-NC Terminal type Screw terminals Switch model A165E-M-02 Operating method Slow action, Direct-opening mechanism Push to lock, turn to reset Operating functions Emergency-stop Contact is opened by pushing in switch and closed by returning switch to original position. switch specifications Contact type DPST-NC Operating part Size: 40 dia. Color: red, non-illuminated Terminal type Soldered terminals Note: 1. The values in the above table are the initial values. 2. For more details on specifications, refer to individual specification sheets for the relevant models. *1. The specification given for the degree of protection is for the built-in switch (D4N-2187) and does not apply to the casing for the whole product. *2. The durability values shown above are for operation at an ambient temperature of 5C to 35C, an ambient humidity of 40% to 70%RH, with an operating stroke of 30 mm at a point 20 mm away from the end of the actuator. Contact your OMRON representative for details on other operating conditions. 2