PA-830-351A-VCR Nidec Copal

PRESSURE TRANSDUCERS WITH AMP. PA-830 INTERNAL STRUCTURE PA-830 (G 1/8) 53 4 1 2 Part name Material FEATURES Fitting SUS 316L 1 High corrosion resistance by double diaphragm structure (P15 or P12.5) Fluoro-rubber 2 O ring Built-in amplifier circuit 2 types to choose from (Gauge and Absolute pressures) Housing Aluminum 3 Incorporating temperature compensation function (0 ~ 50 C) Compensation resistor board Ceramic 4 Voltage output mode Sealed liquid Silicone oil 5 Available with a VCR fitting MODEL NUMBER DESIGNATION P A - 8 3 0 - 1 0 2 A - 0 5 Series name Thermal error/Fitting 05 0.05 % F.S./C, G 1/8 10 0.1 % F.S./C, G 1/8 Rated pressure range R2 0.05 % F.S./C, R 1/4 2 1010 ~ 9.8 kPa 0 ~ 0.1 kgf/cm VCR 0.05 % F.S./C, VCR 2 3510 ~ 34.3 kPa 0 ~ 0.35 kgf/cm 2 5010 ~ 49.0 kPa 0 ~ 0.5 kgf/cm Pressure reference 2 1020 ~ 98.1 kPa 0 ~ 1 kgf/cm GGauge 2 3520 ~ 343 kPa 0 ~ 3.5 kgf/cm 2 AAbsolute 1030 ~ 981 kPa 0 ~ 10 kgf/cm VGauge (Vacuum) Please refer to the LIST OF MODEL NUMBERS when placing orders. VCR is a registered trade name of Cajon Co. CAJON is a registered trade name of Swagelok Co. Note: For handling of VCR fittings, please contact a service center of Swagelok Co.PA-830 PRESSURE TRANSDUCERS WITH AMP. LIST OF MODEL NUMBERS Pressure reference Gauge Absolute Output 2 % F.S./C kPa kgf/cm 0 ~ 9.8 0 ~ 49.0 0 ~ 98.1 0 ~ 343 0 ~ 981 0 ~ 98.1 0 ~ 34.3 0 ~ 98.1 Thermal error Rated pressure range 0 ~ 0.1 0 ~ 0.5 0 ~ 1 0 ~ 3.5 0 ~ 10 0 ~ 1 0 ~ 0.35 0 ~ 1 PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 FittingG 1/8 -501G-05 -102G-05 -352G-05 -103G-05 -102V-05 -351A-05 -102A-05 PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 0.05 FittingR 1/4 -501G-R2 -102G-R2 -352G-R2 -103G-R2 -102V-R2 -351A-R2 -102A-R2 Voltage output PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 FittingVCR -501G-VCR -102G-VCR -352G-VCR -103G-VCR -102V-VCR -351A-VCR -102A-VCR PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 PA-830 0.10 FittingG 1/8 -101G-10 -501G-10 -102G-10 -352G-10 -103G-10 -102V-10 -351A-10 -102A-10 Not available Verify the above model numbers when placing orders. STANDARD SPECIFICATIONS Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation voltage of 12 V DC. PA-830 Item Model number 101G 501G 102G 352G 103G 102V 351A 102A Pressure reference Gauge Absolute 9.8 49.0 98.1 343 981 98.1 34.3 (abs) 98.1 (abs) 2 Rated pressure range kPa kgf/cm 0.1 0.5 1 3.5 10 1 0.35 1 19.6 98.1 196 686 1961 196 103 (abs) 196 (abs) 2 Maximum pressure kPa kgf/cm 0.2 1 2 7 20 2 1.05 2 29.4 147 294 1030 2942 294 147 (abs) 294 (abs) 2 Break-down pressure kPa kgf/cm 0.3 1.5 3 10.5 30 3 1.5 3 Operating temp. range C 20 ~ 70 Compensated temp. range 0 ~ 50 C Operating humidity %RH 35 ~ 85No condensation Storage temp. C 20 ~ 70Atmospheric pressure, humidity 65 %RH maximum Pressure medium Corrosive gases/liquids compatible with SUS 316L 1 M Insulation resistance 100 (500 V DC) minimum Dielectric strength 500 V AC, 60 sLeakage current 1 mA maximum Sealed liquid Silicone oil Pressure port G 1/8 (PF 1/8)R 1/4 (PT 1/4)1/4 VCR 2 Net weight g Approx. 140 Supply voltage V DC 12 ~ 24 10 % Ripple content maximum 10 % (P-P) mA Consumption current 20 maximum 1PA-830-VCR : Also compatible with SUS316. 2An O ring is provided for only G1/8 type. (Positive pressure : P15, Negative/Absolute Pressure : P12.5) Power General specifications