APG1005SEC-T

1.0X0.5X0.2mm (0402)SMD CHIP LED LAMP Part Number: APG1005SEC-T Super Bright Orange Features Description z 1.0mmX0.5mm SMD LED, 0.2mm thickness. The Super Bright Orange source color devices are made z Low power consumption. with AlGaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Compatible with automatic placement equipment. z Ideal for backlight and indicator. z Package: 4000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM9855 REV NO: V.5A DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203013779 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 55 153 APG1005SEC-T Super Bright Orange (AlGaInP) Water Clear 120 *40 *90 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Super Bright Orange 611 nm IF=20mA D 1 Dominant Wavelength Super Bright Orange 605 nm IF=20mA 1/2 Spectral Line Half-width Super Bright Orange 17 nm IF=20mA VF 2 Forward Voltage Super Bright Orange 2.05 2.4 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to CIE127-2007 standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Values Units Power dissipation 60 mW DC Forward Current 25 mA Peak Forward Current 1 120 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAM9855 REV NO: V.5A DATE: JUL/01/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203013779