AAA3528LSEKJ3ZGKQBKS 3.5 x 2.8 mm Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red device is based on light emitting diode chip made from AlGaInP The Green source color devices are made with InGaN on Sapphire Light Emitting Diode The Blue source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Suitable for all SMD assembly and solder process Available on tape and reel Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 2mA Viewin g Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 Hyper Red 30 60 (AlGaInP) AAA3528LSEKJ3ZGKQBKS Water Clear 80 180 Green (InGaN) 120 12 30 Blue (InGaN) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2020 Kingbright. All Rights Reserved. Spec No: DSAO5235 / 1201009104 Rev No: V.4B Date: 06/23/2020 AAA3528LSEKJ3ZGKQBKS ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 640 Wavelength at Peak Emission I = 2mA Green 515 - nm F peak Blue 460 Hyper Red 625 1 Dominant Wavelength I = 2mA Green 525 - nm F dom Blue 465 Hyper Red 20 Spectral Bandwidth at 50% REL MAX Green 35 - nm I = 2mA F Blue 25 Hyper Red 27 Capacitance C Green 45 - pF Blue 100 Hyper Red 1.8 2.1 2 Forward Voltage I = 2mA V Green 2.65 3.1 V F F Blue 2.65 3.1 Hyper Red 10 Reverse Current (V = 5V) I Green - 50 A R R Blue 50 Hyper Red 0.13 Temperature Coefficient of peak TC Green 0.05 - nm/C peak I = 2mA, -10C T 85C F Blue 0.04 Hyper Red 0.06 Temperature Coefficient of dom TC Green 0.03 - nm/C dom I = 2mA, -10C T 85C F Blue 0.03 Hyper Red -2.0 Temperature Coefficient of V F TC Green -2.9 - mV/C V I = 2mA, -10C T 85C F Blue -2.9 Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Green Blue Power Dissipation P 140 123 120 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 50 30 30 mA F 1 Peak Forward Current I 150 150 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 450 250 V - 2 Thermal Resistance (Junction / Ambient) R 250 420 430 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 100 250 270 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2020 Kingbright. All Rights Reserved. Spec No: DSAO5235 / 1201009104 Rev No: V.4B Date: 06/23/2020