MCB1000 User s Guide Introduction Home Introduction The Keil MCB1000 Evaluation Board allows you to generate and test application programs for the NXP LPC11xx and NXP LPC13xx device families. With this hands-on process, you can determine the hardware and software requirements for current and future product development. This board is available in five configurations: the MCB11U10, the MCB1114, the MCB11C14, the MCB1313 and the MCB1343. The MCB11U10 is populated with the NXP LPC11U14/201 Cortex-M0 device (See 2nd note below). The MCB1114 is populated with the NXP LPC1114FBD48/302 Cortex-M0 device. The MCB11C14 is populated with the NXP LPC11C14FB48/301 Cortex-M0 device with CAN support. The MCB1313 is populated with the NXP LPC1313FBD48 Cortex-M3 device. The MCB1343 is populated with the NXP LPC1343FBD48 Cortex-M3 device with USB support. Note Except as noted, this manual uses MCB1000 as a generic term to refer to the MCB11U10, the MCB1114, the MCB11C14, the MCB1313 or the MCB1343 board. The MCB11U10 PCB is physically identical to the MCB1114 PCB but the silkscreen information is different, because the port names and numbers used on the device are located on different pins for this device. The port/pin differences are noted on those pages that reference pinouts and are given in detail in the schematic. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Keil manufacturer: Other Similar products are found below : RL-ARM MDK-ARM CA51 MCBSTM32F200U MCB1760 MCB11U10UME MCB1760U PB-HEAVY-D15/30-BL PB-HEAVY-D15/30- YL PB-HEAVY-D15/40-BL PB-HEAVY-D15/40-YL PB-HEAVY-D25/40-BK ULINKPRO MDK-ARM-B MCBSTM32 PB-HEAVY- D15/50-BK PB-HEAVY-D25/30-BK PB-HEAVY-D25/40-BL PB-HEAVY-D25/50-BL PB-HOME-1/10 MCB2929UME MCB2470 PB- HEAVY-D15/30-BK PB-HEAVY-D15/50-BL PB-HEAVY-D25/40-YL PB-HEAVY-D25/50-YL PB-HOME-1/15 PB-HOME-1/20 PB- HEAVY-D25/25-BK ULINKPLUS MDK-PLUS-T-LC MDKPR-KD-40000