D2440D

DUAL Series Independently controlled dual output solid-state relay Ratings from 25A to 40A 24-530 VAC Industry standard package SCR output for heavy industrial loads DC Control Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 25A 40A 4-15 VDC D2425D D2440D 15-32 VDC D2425DE D2440DE 4-15 VDC H12D4825D H12D4840D 15-32 VDC H12D4825DE H12D4840DE AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description D2425xx D2440xx H12D4825xx H12D4840xx Operating Voltage (47-63Hz) Vrms 24-280 24-280 48-530 48-530 Transient Overvoltage Vpk 600 600 1200 1200 Maximum Off-State Leakage Current Rated Voltage mArms 10 10 10 10 500 500 500 500 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) Maximum Load Current (3) Arms 25 40 25 40 Minimum Load Current Arms 0.15 0.15 0.15 0.15 Maximum 1 Cycle Surge Current (50/60Hz) Apk 239/250 597/625 239/250 597/625 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.6 1.6 1.6 Thermal Resistance Junction to Case (Rjc) C/W 1.02 0.63 1.02 0.63 Maximum 1/2 Cycle It for Fusing (50/60 Hz) A sec 285/259 1779/1621 285/259 1779/1621 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5INPUT SPECIFICATIONS (1) Description D24XXD H12D48XXD E-SUFFIX Control Voltage Range 4-15 VDC 4-15 VDC 15-32 VDC Minimum Turn-On Voltage 4.0 VDC 4.0 VDC 15.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC Typical Input Current 5 VDC ( 24 VDC for E-Suffix) 13 mA 13 mA 15 mA Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm Maximum Turn-On Time msec (4) 1/2 cycle 1/2 cycle 1/2 cycle Maximum Turn-Off Time msec 1/2 cycle 1/2 cycle 1/2 cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 3.0 oz (86.5g) Encapsulation Thermally conductive Epoxy Terminals .25 Fastons, .025 Square Pins GENERAL NOTES 1) All parameters at 25C and per section unless otherwise specified. 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Heat sinking required, for derating curves see next page. 4) Turn-on time for random turn-on (-10) versions is 0.1 msec MECHANICAL SPECIFICATIONS