FREEZE SPRAY Product Name 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Supplier Name CRC INDUSTRIES (AUST) PTY LIMITED Address 9 Gladstone Road, Castle Hill, NSW, AUSTRALIA, 2154 (02) 9634 2088 Telephone Fax (02) 9680 4914 Emergency (02) 9634 2088 info crcind.com.au Email Web Site FREEZE SPRAY Product Name Hazchem Code 2Y 6. ACCIDENTAL RELEASE MEASURES Spillage If cans/containers are punctured (bulk), use personal protective equipment. Clear area of all unprotected personnel. Ventilate area where possible. Collect and allow to discharge outdoors. Contain spillage, then cover / absorb spill with non-combustible absorbant material (vermiculite, sand, or similar), collect and place in suitable containers for disposal. 7. STORAGE AND HANDLING Storage Store in a cool, dry, well ventilated area, removed from oxidising agents, alkalis, active metals, metal powders, heat or ignition sources and foodstuffs. Aerosol containers may explode if exposed to excessive heat (> 50C). Ensure containers are adequately labelled and protected from physical damage when not in use. Handling Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas. 8. EXPOSURE CONTROLS/ PERSONAL PROTECTION Exposure Stds TWA STEL Reference Ingredient ppm mg/m3 ppm mg/m3 1,1,1,2-Tetrafluoroethane ASCC (AUS) 1000 4240 -- -- Biological Limits No biological limit allocated. Engineering Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is Controls recommended. Maintain vapour levels below the recommended exposure standard. PPE Wear splash-proof goggles, leather gloves and safety glasses. When using large quantities or where heavy contamination is likely, wear: coveralls. Where an inhalation risk exists, wear: a Type A-Class P1 (Organic gases/vapours and Particulate) respirator. At high vapour levels, wear: an Air-line respirator. 9. PHYSICAL AND CHEMICAL PROPERTIES COLOURLESS GAS (AEROSOL Appearance Solubility (Water) NOT AVAILABLE DISPENSED) Odour ETHEREAL-LIKE ODOUR Specific Gravity 1.212 pH NOT AVAILABLE % Volatiles 100 % Vapour Pressure 0.583 MPa 25C Flammability NON FLAMMABLE Vapour Density > 1 (Air = 1) Flash Point NOT RELEVANT Boiling Point -26.4C Upper Explosion Limit NOT RELEVANT Melting Point NOT AVAILABLE Lower Explosion Limit NOT RELEVANT Evaporation Rate NOT AVAILABLE 10. STABILITY AND REACTIVITY Chemical Stability Stable under recommended conditions of storage. Conditions to Avoid Avoid heat, sparks, open flames and other ignition sources. Material to Avoid Incompatible with oxidising agents (eg. hypochlorites), alkalis/ alkali earth metals. Decomposition May evolve toxic gases if heated to decomposition. Hazardous Reactions Polymerization is not expected to occur. Page 2 of 4 RMT Reviewed: 01 Apr 2010 Printed: 13 Apr 2010