L-7104YD-12V

T-1 (3mm) SOLID STATE LAMP Part Number: L-7104YD-12V Yellow Features Description z LOW POWER CONSUMPTION. The Yellow source color devices are made with Gallium z POPULAR T-1 DIAMETER PACKAGE. Arsenide Phosphide on Gallium Phosphide Yellow Light z GENERAL PURPOSE LEADS Emitting Diode. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. z 12V INTERNAL RESISTOR. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAC2578 REV NO: V.5 DATE: JUL/10/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101008516 Selection Guide Iv (mcd) 2 Viewing V= 12V Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 L-7104YD-12V Yellow (GaAsP/GaP) YELLOW DIFFUSED 3 11 40 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Yellow 590 nm VF=12V D 1 Dominant Wavelength Yellow 588 nm VF=12V 1/2 Spectral Line Half-width Yellow 35 nm VF=12V IF Forward Current Yellow 8.5 11.5 mA VF=12V IR Reverse Current Yellow 10 uA VR = 5V Note: 1.Wavelength: +/-1nm. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 120 mW Forward Voltage 14 V Reverse Voltage 5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature 1 260C For 3 Seconds Lead Solder Temperature 2 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAC2578 REV NO: V.5 DATE: JUL/10/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1101008516