CT40-5

CHEMTRONICS TDS CT40 Technical Data Sheet CircuitWorks Heat Sink Grease TYPICAL PRODUCT DATA AND PRODUCT DESCRIPTION PHYSICAL PROPERTIES CircuitWorks Heat Sink Grease silicone compound facilitates heat transfer away Color White from electrical/electronic components. This heavy consistency material is thickened with Specific Gravity 25 C (77F) 2.6 a heat conductive metal oxide filler to maintain a positive heat sink seal in Usable Temperature Range electrical/electronic equipment. -52 F (-46 C) to 603 F (317 C) Dielectric Strength, v/mil 500 Excellent conductivity Meets MIL-C-47113 Dielectric Constant 100 Hz 4.4 Noncorrosive High dielectric strength Dissipation Factor 100 Hz 0.005 Low bleed Stable from -15 C to 200 C 14 Volume Resistivity, ohm-cm 1 x 10 Nonflammable Arc Resistance, seconds 120 TYPICAL APPLICATIONS Thermal Conductivity, CircuitWorks Heat Sink Grease may be 2 -3 Cal-cm/sec-cm -C 1.5 x 10 used for electronics and applications 2 BTU-in/hr-ft -F 4.35 including: Effective Thermal Coupler For Any W/mK 0.63 Heat Sink Device Shelflife 5 years Nonflammable Coating Protection High Voltage Corona Protection Excellent for Improving Readings on COMPATIBILITY Contact Type Thermocouples CircuitWorks Heat Sink Grease is generally compatible with most materials used in printed circuit board fabrication. As with any silicone compound, compatibility with substrate must be determined on a non- critical area prior to use.