QRM85BXXG28E Apem

QRM8 series 8 mm rear panel mount LED indicators DISTINCTIVE FEATURES 5 mm flush diffused LED, standard, hyper brigh or clear water Bi-color and tri-color LED options 200 mm wire or pin terminations ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating Temperature Range: -40 C to +85 C ( 40 F to +185 F) Storage Temperature Range: -55 C to +100 C (-67 F to +212 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 60 Life Expectancy: 100,000 hours Max Panel Thickness: 3.5 mm Torque: 60 cNm MATERIALS Body: Black chrome plated brass Lock Washer: Spring steel Nut: Black chrome plated brass Terminal Seal: Epoxy Panel Seal: Nitrile O-ring Wires: 24 AWG to UL1061 or UL1213 on request MOUNTING The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 IND-QRM8-17-07 LED INDICATORSQRM8 series 8 mm rear panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Min to Max) (Typical All Types) LED COMPONENT SPECIFICATIONS 02 (No Resistor) 1.8 to 3.8 VDC 20 mA max MCD Output (all voltages) Forward Voltage 6 VDC 5.4 to 6.6 VDC 20 mA HE Red 8 mcd 2.0 V 12 VDC 10.8 to 13.2 VDC 20 mA Green 6 mcd 2.2 V 24 VDC 21.6 to 26.4 VDC 20 mA Yellow 6 mcd 2.1 V 28 VDC 25.2 to 30.8 VDC 20 mA Blue 50 mcd 3.8 V * Customer to supply resistor for desired operating White 500 mcd 3.3 V current. Bi-color (Typical) 15/10 mcd 2.0 V/2.2 V (Red/Green) Tri-color (Typical) 15/10/6 mcd 2.0 V/2.2 V/2.1 V (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS MCD Output (all voltages) Forward Voltage HE Red 1,300 mcd 2.2 V Green 1,200 mcd 3.3 V Yellow 350 mcd 2.0 V Blue 280 mcd 3.3 V White 950 mcd 3.3 V Orange 500 mcd 2.2 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS MCD Output (all voltages) Forward Voltage HE Red 980 mcd 2.2 V Green 300 mcd 3.3 V Yellow 250 mcd 2.0 V The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2 LED INDICATORS