Product Information

OKI-78SR-12/1.0-W36HE-C

Product Image X-ON

Module DC-DC 24VIN 1-OUT 12V 1A 12W 3-Pin
Manufacturer: Murata


Price (Ex GST)

From 8.3429

9 - Global Stock
Ships to you between
Fri. 11 Dec to Thu. 17 Dec
MOQ: 2 Multiples:
Pack Size :   1
Availability Price Quantity
9 - Global Stock


Ships to you between Fri. 11 Dec to Thu. 17 Dec
Calender

MOQ : 1
Multiples : 1
1 : $ 9.7875
5 : $ 9.048
10 : $ 8.5131
25 : $ 8.3429

Buy
68 - Global Stock


Ships to you between Thu. 10 Dec to Mon. 14 Dec
Calender

MOQ : 1
Multiples : 1
1 : $ 13.9071
5 : $ 10.0286
10 : $ 9.9429
25 : $ 9.8057
50 : $ 9.5143
100 : $ 8.88

Buy
9 - Global Stock


Ships to you between Fri. 11 Dec to Thu. 17 Dec
Calender

MOQ : 2
Multiples : 2
2 : $ 9.7875
5 : $ 9.048
10 : $ 8.5131
25 : $ 8.3429

Buy
         
Manufacturer
Murata
Product Category
Isolated DC/DC Converters
Category
Isolated Dc/Dc Converters
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Stock Image OKI-78SR-3.31.5-W36H-C
Murata Power Solutions Non-Isolated DCDC Converters 24Vin 3.3Vout 1.5A Horizontal Mount
Stock : 498
Stock Image OKI-78SR-5/1.5-W36-C
Non-Isolated DC/DC Converters 7.5W 24Vin 5Vout1 1.5A SIP Non-Iso
Stock : 6658
Stock Image OKI-78SR-3.3/1.5-W36-C
Non-Isolated DC/DC Converters 4.95W 24Vin 3.3Vout 1.5A SIP Non-Iso
Stock : 41
Stock Image OKI-78SR-51.5-W36H-C
Murata Power Solutions Non-Isolated DCDC Converters 7.5W 24V 5Vout 1.5A Horizontal Mount
Stock : 2633
Stock Image OKI-78SR-5/1.5-W36H-C
Non-Isolated DCDC Converters 7.5W 24V 5Vout 1.5A Horizontal Mount
Stock : 221
Stock Image OKI-78SR-3.3/1.5-W36E-C
Module DC-DC 12VIN 1-OUT 3.3V 1.5A 4.95W 3-Pin
Stock : 37
Stock Image OKI-78SR-3.3/1.5-W36HE-C
Non-Isolated DC/DC Converters 7-36Vin 3.3Vout 1.5A HSIP Encapsulated
Stock : 125
Stock Image OKI-78SR-5/1.5-W36E-C
Module DC-DC 12VIN 1-OUT 5V 1.5A 7.5W 3-Pin
Stock : 219
Image Description
Stock Image OKI-78SR-3.3/1.5-W36E-C
Module DC-DC 12VIN 1-OUT 3.3V 1.5A 4.95W 3-Pin
Stock : 37
Stock Image OKL-T/1-W12P-C
Module DC-DC 12VIN 1-OUT 0.9V to 5.5V 1A 5W 12-Pin LGA Module T/R
Stock : 800
Stock Image PCM1-S5-S5-S
Isolated DC/DC Converters 4.5-5.5Vin 5Vout 200mA 1W Iso SIP7
Stock : 296
Stock Image PCN1-S12-D12-M-TR
Isolated DC/DC Converters 1W 12Vin +/-12V SMT +/-42mA Iso UnReg TR
Stock : 331
Stock Image PCN1-S12-D12-S
Isolated DC/DC Converters 10.8-13.2Vin +/-12V +/-42mA 1W Iso SIP
Stock : 135
Stock Image PCN1-S12-D5-S
Isolated DC/DC Converters 10.8-13.2Vin +/-5V +/-100mA 1W Iso SIP
Stock : 159
Stock Image PCN1-S12-S12-M-TR
Isolated DC/DC Converters 1W 12Vin 12Vout SMT 84mA Iso UnReg TR
Stock : 258
Stock Image PCN1-S12-S12-S
Isolated DC/DC Converters 10.8-13.2Vin 12Vout 84mA 1W Iso SIP
Stock : 24
Stock Image PCN1-S12-S15-S
Isolated DC/DC Converters 10.8-13.2Vin 15Vout 67mA 1W Iso SIP
Stock : 18

OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS ? OKI-78SR-3.3/1.5-W36E-C ABSOLUTE MAXIMUM RATINGS Minimum Typical/Nominal Maximum Units Conditions ? Full power operation 0 36 Vdc Input Voltage, Continuous Input Reverse Polarity None, install external fuse None Vdc Output Power 0 5.15 W Output Current Current-limited, no damage, short-circuit protected 0 1.5 A Storage Temperature Range Vin = Zero (no power) -55 125 ?C Absolute maximums are stress ratings. Exposure of devices to greater than any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Speci?cations Table is not implied or recommended. INPUT Operating voltage range 7 12 36 Vdc Recommended External Fuse Fast blow 2 A None, install external fuse None Vdc Reverse Polarity Protection ? Internal Filter Type C-TYPE Input current Full Load Conditions 0.48 0.51 A Vin = nominal Low Line Vin @ min 0.80 0.85 A 2 Inrush Transient 0.16 A -Sec. Short Circuit Input Current 5 mA No Load Input Current Vin = nominal 5 10 mA Shut-Down Mode Input Current 1 mA (Cin = 2 X 100uF, CBus = 1000uF, LBus = 1uH) 50 mA, pk-pk Re?ected (back) ripple current ? GENERAL and SAFETY @ Vin nom, 3.3Vout 83.7 85.5 % Efficiency @ Vin min, 3.3Vout 87.0 88.4 % Certi?ed to UL-60950-1, IEC/EN60950-1, Safety Yes 2nd Edition Per Telcordia SR332, issue 1, class 3, ground 6 78.7 Hours x 10 Calculated MTBF ? ?xed, Tambient=+25?C DYNAMIC CHARACTERISTICS Fixed Switching Frequency 500 kHz 50-100-50% load step, settling time to within Dynamic Load Response 25 50 ?Sec ?2% of Vout di/dt =1A/?Sec Dynamic Load Peak Deviation same as above 100 150 mV www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 3 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC Typical units FEATURES PRODUCT OVERVIEW  Encapsulated in a 0.47 x 0.69 inch (11.9 x Three nominal output voltages are offered (3.3, 7-36Vin (3.3 & 5Vout), 15-36Vin (12Vout) 17.6 mm) vertical or horizontal package, the OKI- 5 and 12 VDC), up to 1.5 Amp maximum output.  Fixed Output: 3.3 or 5V @ 1.5A or 12V @ 1.0A 78SR-E series are non-isolated switching Based on ?xed-frequency buck switching  Vertical SIP or horizontal mount, small footprint, regulator (SR) DC-DC power converters for topology, the high ef?ciency means very low heat in an Encapsulated package embedded applications. The ?xed single output and little electrical noise, requiring no external  converters offer both tight regulation and high components. The 3.3 and 5Vout models have an ?No heat sink? direct replacement for 3-terminal ef?ciency directly at the power usage site and are ultra wide input range of 7 to 36 Volts DC and the 78xx-series linear regulators a direct plug-in replacement for TO-220 package 12Vout model has an input voltage range of 15 to  High ef?ciency with no external components 78xx series linear regulators. Typically, no extra 36V.  Short circuit protection outside components are required. Protection features include short circuit  Outstanding thermal derating performance current limit protection. The OKI-78SR-E is  UL/EN/IEC 60950-1, 2nd Edition safety approvals designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is speci?ed as standard. Connection Diagram +Vin +Vout ? Switching F1 ? Filters Controller ? Current Sense External DC Power Reference and Source Error Ampli?er Common Common Figure 1. OKI-78SR-E Note: Murata Power Solutions strongly recommends an external input fuse, F1. See speci?cations. (Pending) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 1 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) Regulation (Typ.) IIN, IIN, Efficiency VOUT (Amps Power VIN Nom. Range no load full load Package Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) Min. Typ. Inches (mm) 0.47 x 0.40 x 0.69 OKI-78SR-3.3/1.5-W36E-C 3.3 1.5 4.95 40 ?0.30% ?0.40% 12 7-36 5 0.48 84% 85.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-5/1.5-W36E-C 5 1.5 7.5 75 ?0.30% ?0.40% 12 7-36 5 0.69 89% 90.5% (11.9 x 10.0 x 17.6) 0.47 x 0.40 x 0.69 OKI-78SR-12/1.0-W36E-C 12 1.0 12 75 ?0.25% ?0.25% 24 15-36 5 0.53 93.5% 95.3% (11.9 x 10.0 x 17.6) NOTE: All specifications are at nominal line voltage, Vout = nominal and full load, +25?C.with no external capacitor, unless otherwise noted. NOTE: Please click here to view the data sheet for the OKI-78SR ?Open-frame? series. www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 2 of 20 OKI-78SR-E Series Encapsulated Non-Isolated Switching Regulator DC-DC FUNCTIONAL SPECIFICATIONS ? OKI-78SR-3.3/1.5-W36E-C ABSOLUTE MAXIMUM RATINGS Minimum Typical/Nominal Maximum Units Conditions ? Full power operation 0 36 Vdc Input Voltage, Continuous Input Reverse Polarity None, install external fuse None Vdc Output Power 0 5.15 W Output Current Current-limited, no damage, short-circuit protected 0 1.5 A Storage Temperature Range Vin = Zero (no power) -55 125 ?C Absolute maximums are stress ratings. Exposure of devices to greater than any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Speci?cations Table is not implied or recommended. INPUT Operating voltage range 7 12 36 Vdc Recommended External Fuse Fast blow 2 A None, install external fuse None Vdc Reverse Polarity Protection ? Internal Filter Type C-TYPE Input current Full Load Conditions 0.48 0.51 A Vin = nominal Low Line Vin @ min 0.80 0.85 A 2 Inrush Transient 0.16 A -Sec. Short Circuit Input Current 5 mA No Load Input Current Vin = nominal 5 10 mA Shut-Down Mode Input Current 1 mA (Cin = 2 X 100uF, CBus = 1000uF, LBus = 1uH) 50 mA, pk-pk Re?ected (back) ripple current ? GENERAL and SAFETY @ Vin nom, 3.3Vout 83.7 85.5 % Efficiency @ Vin min, 3.3Vout 87.0 88.4 % Certi?ed to UL-60950-1, IEC/EN60950-1, Safety Yes 2nd Edition Per Telcordia SR332, issue 1, class 3, ground 6 78.7 Hours x 10 Calculated MTBF ? ?xed, Tambient=+25?C DYNAMIC CHARACTERISTICS Fixed Switching Frequency 500 kHz 50-100-50% load step, settling time to within Dynamic Load Response 25 50 ?Sec ?2% of Vout di/dt =1A/?Sec Dynamic Load Peak Deviation same as above 100 150 mV www.murata-ps.com/support MDC_OKI-78SR-W36E.A01 Page 3 of 20

Tariff Concession Code
Tariff Desc

9601650
8504.40.90 CONVERTERS, DC/DC, power output not exceeding 5 W, being ANY of the following:
(a) single in line package;
(b) dual in line;
(c) surface mount device
Op. 01.07.1996 Dec.27.02.1996 - TC 9601650

Customer Comments  

Log in or register to post comments.

Customer Reviews

No reviews yet.