13.9mm(39 pos.) 0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors FH39 Series 3.45mm Depth 1.1mm Fig.1 Features Easy FPC insertion 1. Low-pro le 0.3mm pitch connector with top and bottom contact Usable via either its top or bottom contact point, ActuatorActuator this connector achieves enhanced freedom in terms of the product design. 2. High contact reliability thanks to the spring terminal structure Because both top and bottom contact points are spring-loaded, the contact point adapts to the FPC motion, and high contact reliability is ensured. FPCFPC 3. Delivered with the actuator open FPC can be immediately inserted without the need for the opening of the actuator. (Fig.2) Fig.2 4. Easy FPC insertion Completely locked Entry chamfers at all sides of the FPC insertion slot assure correct insertion and positioning of the FPC. 5. Accepts standard FPC thickness 0.2mm thick standard Flexible Printed Circuit (FPC) can be used. This is the only ultra-low pro le ZIF connector using standard FPC. 6. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. 7. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Fig.3 Standard reel packaging contains 5000 connectors. * 8. Halogen-free (FH39J Series) *As de ned by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 1 2015.8 3.45mm Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.FH39 Series0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors Product Speci cations Operating Storage Current rating 0.2A -55 to +85C (Note 1) -10 to +50C (Note 2) temperature range temperature range Ratings Operating Relative humidity 90% max. Storage Relative humidity 90% max. Voltage rating 30Vrms AC humidity range (No condensation) humidity range (No condensation) Recommended FPC Thickness: 0.2 0.03mm, Gold plated contact pads Item Speci cation Conditions 50M min. 100V DC 1.Insulation resistance 2.Withstanding voltage No ashover or insulation breakdown 90Vrms AC / 1 minute 100m max. 3.Contact resistance 1mA, AC max (AC: 1kHz) * Including FPC and FFC conductor resistance Contact resistance : 100m max. 4.Durability 10 cycles No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Frequency : 10 to 55Hz, 5.Vibration Contact resistance : 100m max. single amplitude of 0.75mm, No damage, cracks, or parts dislocation 10 cycles in each of the 3 axis No electrical discontinuity of 1s or longer Acceleration of 981m/s2, 6ms duration, 6.Shock Contact resistance : 100m max. sine half-wave, 3 cycles in each of the 3 axis No damage, cracks, or parts dislocation Contact resistance : 100m max. 7.Humidity Insulation resistance : 50M min. 96 hours at 40 and humidity of 90 to 95% (Steady state) No damage, cracks, or parts dislocation Contact resistance : 100m max. Temperature : -55 +15 to +35 +85 +15 to +35 8.Temperature cycle Insulation resistance : 50M min. Time : 30 2 to 3 30 2 to 3 minutes No damage, cracks, or parts dislocation 5 cycles 9. Resistance to No deformation of components affecting Re ow : At the recommended temperature pro le performance soldering heat Manual soldering : 350 5 for 5 seconds Note 1 : Includes temperature rise caused by current ow. Note 2 : The termstorag refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Materials / Finish Part Material Finish Remarks LCP Color:Beige Insulator UL94V-0 PA Color:Black Contacts Gold plated ----------------- Phosphor bronze Metal ttings Pure tin re ow plated ----------------- Product Number Structure ( ) FH 39 J - 51S - 0.3 SHW 10 qwe r t y u Series name : FH No. of Contacts q r Series No. : 39 FH39 : 25 to 61 w e Blank : Standard FH39A :67 A : Long actuator type FH39J : 25 to 51 J :Halogen-free (Flame retardance UL94V-0). t Contact pitch : 0.3mm Termination type y SHW... SMT horizontal staggered row mount type u Plating speci cations (10)...Standard 5,000 pcs/reel (99)...500 pcs/reel 2 Apr.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.