The P16S is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back side of the panel reducing to a minimum the required clearance.
FEATURES
P16S - version for military, professional and
industrial applications (cermet): 1 W at 40 °C
PA16S - version for professional audio
applications (conductive plastic)..
View Products

The RDF150 Series is a range of low profile, base plate cooled DC-DC brick converters that delivers 150W and offers single output voltages ranging from 5V to 48VDC. The RDF150 series offers an ultra-wide 12:1 input range of 14 to 160VDC, which covers standard industrial voltages and meets all requirements of the EN50155 transportation standard. Base plate cooling enables effective thermal management which ensures elevated levels of reliability.
With world-wide industrial safety approval..
View Products

Quick release simplifies insertion and removal of wires for fast, safe and secure operation.
Connects solid and stranded wires within same housing for versatile wire management.
Accepts 12 AWG solid wire and 14 - 28 AWG stranded wire.
Clear housing eases inspection with visual verification that wires have been inserted properly.
HelaCon Plus Mini, Push-In Style Wire Connector, Double Spring, 2-Port, (PC), Yellow, 500/pkg
FEATURES
Type-HCPM-2
Colo..
View Products

Using Amphenol Pcd's Band Lock Adapter is another method of termination of screens. A high quality band will do the job in this backshell. Tempered bands are tightened over the shields, which is pulled over the banding area, using special assembly tools. Suitable over cover by heat shrink boot or some other method as chosen by the designer could be used. Both crimp ring and banded terminations give a low DC resistance.
Both individual and overall shieldings can be terminated in this type ..
View Products

Power Resistor for Mounting onto a Heatsink Thick Film Technology RECOMMENDATIONS FOR MOUNTING ONTO A HEATSINK
Surfaces in contact must be carefully cleaned.
The heatsink must have an acceptable flatness: From 0.05 mm to 0.1 mm/100 mm.
Roughness of the heatsink must be around 6.3 µm. In order to improve thermal conductivity, surfaces in contact (alumina,heatsink) should be coated with a silicone grease (type Bluesil Past 340 from BlueStar Silicones) or a thermal film (..
View Products