Product Information

90684-1

90684-1 electronic component of TE Connectivity

Datasheet
TE Connectivity AMP Crimpers PRO-CRIMPER ASSY

Manufacturer: TE Connectivity
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 303.325 ea
Line Total: USD 303.325

3 - Global Stock
Ships to you between
Thu. 04 Apr to Wed. 10 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
3 - Global Stock


Ships to you between Thu. 04 Apr to Wed. 10 Apr

MOQ : 1
Multiples : 1

Stock Image

90684-1
TE Connectivity

1 : USD 303.325
3 : USD 286.9625
5 : USD 281.3375
10 : USD 275.825
25 : USD 268.4875

20 - Global Stock


Ships to you between Wed. 10 Apr to Fri. 12 Apr

MOQ : 1
Multiples : 1

Stock Image

90684-1
TE Connectivity

1 : USD 283.82
10 : USD 279.1165
25 : USD 269.1
50 : USD 269.1
100 : USD 269.1
250 : USD 269.1
500 : USD 269.1
1000 : USD 269.1

2 - Global Stock


Ships to you between Thu. 04 Apr to Wed. 10 Apr

MOQ : 1
Multiples : 1

Stock Image

90684-1
TE Connectivity

1 : USD 340.8768

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
Description/Function
Brand
Factory Pack Quantity :
Packaging
Cnhts
Hts Code
Product Type
Subcategory
Taric
Tradename
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
90684-2 electronic component of TE Connectivity 90684-2

Crimpers / Crimping Tools DYNAMIC DIE ASSY
Stock : 1

90707-2 electronic component of TE Connectivity 90707-2

General Hand Tool Used In The Aircraft And Military Industries
Stock : 0

90717-2 electronic component of TE Connectivity 90717-2

Other Tools SAHT ASSY 30-24 MINI UMNL
Stock : 0

90753-1 electronic component of TE Connectivity 90753-1

Other Tools SEATING TOOL ASSY H.
Stock : 1

90758-2 electronic component of TE Connectivity 90758-2

Punches & Dies PROCRIMP DIE MINI UMNL
Stock : 8

907122N002 electronic component of TE Connectivity 907122N002

Solder Sleeves & Shield Tubing SO63-3-55-20-0CS2396
Stock : 0

907523-000 electronic component of TE Connectivity 907523-000

Multi-Conductor Cables 44AM1111-12-9-9CS2275
Stock : 0

90740-1 electronic component of TE Connectivity 90740-1

Crimpers HHHT ASSY-COAX (BOEING)
Stock : 0

90758-1 electronic component of TE Connectivity 90758-1

Crimpers / Crimping Tools TOOL ASSY W/DIE SET MINI UNIV MNL
Stock : 13

90755-1 electronic component of TE Connectivity 90755-1

Hand Tools SEATING TOOL ASSY H.M. 175 PIN
Stock : 0

Image Description
90683-1 electronic component of TE Connectivity 90683-1

TE Connectivity AMP Crimpers PROCRIMPER ASSEMBLY
Stock : 2

4-1333205-8 electronic component of TE Connectivity 4-1333205-8

Crimpers / Crimping Tools ANVIL, COMBO .090
Stock : 2

4-1333204-3 electronic component of TE Connectivity 4-1333204-3

Crimpers ANVIL COMB. .080
Stock : 0

4-1333203-9 electronic component of TE Connectivity 4-1333203-9

Crimpers ANVIL COMB. (.070)
Stock : 0

4-1333203-2 electronic component of TE Connectivity 4-1333203-2

Crimpers ANVIL, COMB. (.070)
Stock : 0

DM 525 25" SPARE BLADES electronic component of Mega DM 525 25" SPARE BLADES

SPARE BLADE, DM525 25" SHEAR
Stock : 0

1338693-1 electronic component of TE Connectivity 1338693-1

Crimpers ANVIL COMBINATION
Stock : 0

1338692-1 electronic component of TE Connectivity 1338692-1

Crimpers / Crimping Tools ANVIL ASSY APPLICATOR TOOL
Stock : 1

1338689-1 electronic component of TE Connectivity 1338689-1

Crimpers ANVIL, COMBO .042
Stock : 6

1338125-3 electronic component of TE Connectivity 1338125-3

Crimpers CRIMPER, WIRE SPLICE
Stock : 0

Instruction Sheet PRO-CRIMPER*IIIHand CrimpingToolAssembly90684-1 408--9934 withDieAssembly90684-2 09 OCT 09 RevC PROPERUSEGUIDELINES CumulativeTraumaDisorderscanresultfromtheprolongeduseofmanuallypoweredhandtools.Handtoolsareintendedforoccasionaluseandlowvolume applications.Awideselectionofpoweredapplicationequipmentforextended--use,productionoperationsisavailable. Locator Assembly Stationary Jaw (Supplied with Die Assembly) Back of Tool (Wire Side) Front of Tool (Locator Side) Pivot Pin Die Assembly PRO--CRIMPER III Hand Crimping Tool Frame Moving Jaw 354940--1 (408--9930) Ratchet Adjustment Wheel ThePRO--CRIMPERIIIHandCrimpingTool isaCommercialgradetool and isdesignedprimarilyforfieldinstallation,repair,maintenancework,or Stationary prototypinginindustrial,commercial,orinstitutional applications.Product Handle crimpedwiththistool will meetthecrimpheightrequirementforhandtoolsin theappropriate114seriesspecification,butmaynotcomplywithotherfeature parametersofthespecification.TycoElectronicsoffersavarietyoftoolsto satisfyyourperformancerequirements.Foradditional information,contactthe Moving Handle Tooling Assistance Center at 1--800--722--1111. Wire TETELLococaattoror CCoontantacctt TTEEDDiieeAAsssemsembbllyy Assembly Family Size(AWG) InsulDia StripLength 1.80 to 2.79 20--18 .071 to .110 DDyynnamicamicDD--33000000 3.303.30 ttoo 4.324.32 9906840684--22 5851558515--11 SeriesConnectors .130 to .170 2.18 to 2.79 16 .086 to .110 Suppliedwithdieassembly. Alsoavailableseparately. ContacttheTOOLING ASSISTANCE CENTER or PRODUCTINFORMATION (seebelow) for specific contactpartnumbers. Figure 1 Reasons for reissue are provided in Section 11, 1. INTRODUCTION REVISION SUMMARY. PRO--CRIMPER III Hand Crimping Tool Assembly 90684--1 consists of Die Assembly 90684--2 and PRO--CRIMPER III Hand Crimping Tool 2. DESCRIPTION (Figures1 and 2) Frame 354940--1. The die assembly consists of crimping dies and a locator assembly. The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an Read these instructions thoroughly before crimping adjustable ratchet that ensures full contact crimping. any contacts. The tool frame holds a die assembly with two Dimensions on this sheet are in millimeters with crimping sections. NOTE inch equivalents provided in brackets . Figures and illustrations are for identification only and are The die assembly features a wire anvil, an insulation i not drawn to scale. anvil, a wire crimper, and an insulation crimper. E2009 Tyco Electronics Corporation, Harrisburg, PA TOOLING ASSISTANCE CENTER1--800--722--1111 This controlled document is subject to change. 1 of 6 PRODUCT INFORMATION 1--800--522--6752 Forlatest revision and Regional CustomerService, All International Rights Reserved visit ourwebsite atwww.tycoelectronics.com TE logo and Tyco Electronics are trademarks. LOCB *Trademark. Otherproducts, logos, and company names used are the property of theirrespective owners.408-9934 PRO-CRIMPERIIIHandCrimpingToolAssembly90684-1 Locator Nut Assembly Tool Frame Locator Insulation Die Retaining Crimper Chamfer Pins Wire Crimper Offset Wire Anvil Chamfer Insulation Die Retaining Anvil Screws Figure 2 Attached to the outside of the frame is a locator surfaces face outward, when mounted in the assembly, which contains a locator, a spring retainer, stationary jaw of the tool frame. and a contact support. 6. Insert the two die retaining pins. Die retaining pins and die retaining screws are used 7. Insert the long die retaining screw through the to position and secure the dies in the tool frame. A jaw and through both crimper dies, and tighten the nut is used on the upper die retaining screw to hold screw just enough to hold the dies in place. Do not the locator assembly in place. tighten the screw completely at this time. 8. Carefully close the tool handles, making sure 3. INSTALLATIONANDREMOVALOFDIESET that the anvils and crimpers align properly. ANDLOCATORASSEMBLY (Figure 2) Continue closing the tool handles until the ratchet in the tool frame has engaged sufficiently to hold 1. Open the tool handles and remove the two die the anvils and crimpers in place, then tighten both retaining screws from the tool jaws. die retaining screws. 2. Place the wire anvil and insulation anvil so that 9. Place the locator assembly over the end of the their chamfered sides and their marked surfaces long screw, and position the locator assembly face outward, when mounted in the moving jaw of against the side of the tool jaw. the tool frame. 10. Place the nut onto the end of the long screw 3. Insert the two die retaining pins. and tighten the nut enough to hold the locator assembly in place, while still allowing the locator to 4. Insert the short die retaining screw through the slide up and down. jaw and through both anvil dies, and tighten the 11. To disassemble, close the tool handles until the screw just enough to hold the dies in place. Do not ratchet releases, remove the nut, the locator tighten the screw completely at this time. assembly, the two die retaining screws, and the 5. Place the wire crimper and insulation crimper so four die retaining pins, and slide the anvils and that their chamfered sides and their marked crimpers out of the tool jaws. 2 of 6 TycoElectronicsCorporation RevC

Tariff Desc

8203.20 TOOLS, crimping, but NOT including crimping tools put up in packs containing electrical connectors Op. 27.05.1985 Dec. 27.05.1985 - TC 8532098
AGASTAT - TE CONNECTIVITY
ALCOSWITCH - TE CONNECTIVITY
Alpha Sensors
AMP - TE CONNECTIVITY
AMP FROM TE CONNECTIVITY
AMP/TYCO
AUGAT - TE CONNECTIVITY
AXICOM - TE CONNECTIVITY
AXIOHM
AXIOHM / TXCOM
BUCHANAN - TE CONNECTIVITY
CGS - TE CONNECTIVITY
CII - TE CONNECTIVITY
CITEC - TE CONNECTIVITY
CORCOM - TE CONNECTIVITY
CROMPTON - TE CONNECTIVITY
Deutsch
Deutsch Group
DEUTSCH UK
ELCON - TE CONNECTIVITY
Entrelec
ENTRELEC - TE CONNECTIVITY
ENTRELEC UK
ERNI
ERNI COMPONENTS
ERNI Elec
ERNI ELECTRONICS
GREENPAR - TE CONNECTIVITY
HOLSWORTHY - TE CONNECTIVITY
HTS - TE CONNECTIVITY
HUM
Kemtron
KILOVAC-TE CONNECTIVITY
Laird External Antennas
LUCENT TECH / TYCO
MADISON CABLE / TE
MADISONCABLE - TE CONNECTIVITY
Measurement Specialties
Measurement Specialties Inc.
Measurement Specialties, Inc.
NEOHM
NEOHM - TE CONNECTIVITY
OEG - TE CONNECTIVITY
PLM
Polamco
POLAMCO - TE CONNECTIVITY
POTTER&BRUMFIELD - TE CONNECTIVITY
PRODUCTSUNLIMITED - TE CONNECTIVITY
RAYCHEM
RAYCHEM - TE CONNECTIVITY
RAYCHEM RPG
RYC
SCHRACK
SCHRACK - TE CONNECTIVITY
SENSOR SOLUTIONS - TE CONNECTIVITY
SIGMA
SIGMAINDUCTORS - TE CONNECTIVITY
TE
TE Application Tooling
TE CONNECTIVITY
TE Connectivity ADC
TE Connectivity Agastat
TE Connectivity Alcoswitch
TE Connectivity AMP
TE Connectivity Axicom
TE Connectivity Buchanan
TE Connectivity CGS
TE Connectivity CII
TE Connectivity Citec
TE Connectivity CO-EV
TE Connectivity Corcom
TE Connectivity DEUTSCH
TE Connectivity Hartman
TE Connectivity Holsworthy
TE Connectivity Kilovac
TE Connectivity Madison
TE Connectivity Nanonics
TE Connectivity Neohm
TE Connectivity OEG
TE Connectivity P&B
TE Connectivity Products Unlimited
TE Connectivity Q-Cees
TE Connectivity Raychem
TE Connectivity Schrack
TE Connectivity Sigma Inductors
TE Connectivity / ABB Entrelec
TE Connectivity / Agastat
TE Connectivity / Agastat Brand
TE Connectivity / Alcoswitch
TE Connectivity / Alcoswitch Brand
TE Connectivity / AMP
TE Connectivity / AMP Asia
TE Connectivity / AMP Brand
TE CONNECTIVITY / AUGAT
TE Connectivity / Axicom
TE Connectivity / Buchanan
TE Connectivity / Buchanan Brand
TE Connectivity / CGS
TE Connectivity / CGS Brand
TE Connectivity / Chip Coolers Brand
TE Connectivity / CII
TE Connectivity / CII Brand
TE CONNECTIVITY / CITEC
TE Connectivity / Citec Brand
TE Connectivity / CO-EV
TE Connectivity / CoEv Magnetics Brand
TE Connectivity / Corcom
TE Connectivity / Corcom Brand
TE Connectivity / Critchley Brand
TE CONNECTIVITY / CROMPTON
TE Connectivity / DEUTSCH
TE CONNECTIVITY / DEUTSCH AUTOMOTIVE
TE CONNECTIVITY / ELCON
TE Connectivity / Elcon Brand
TE Connectivity / Energy
TE CONNECTIVITY / ENERGY DIVISION
TE Connectivity / Entrelec
TE Connectivity / ERNI
TE CONNECTIVITY / GREENPAR
TE Connectivity / Hartman
TE Connectivity / Hartman Brand
TE Connectivity / Hirschmann
TE Connectivity / Holsworthy
TE Connectivity / Holsworthy Brand
TE CONNECTIVITY / HTS
TE Connectivity / Intercontec
TE Connectivity / Kemtron
TE Connectivity / Kilovac
TE Connectivity / Kilovac Asia
TE Connectivity / Kilovac Brand
TE Connectivity / Kissling
TE Connectivity / Laird External Antennas
TE Connectivity / Linx Technologies
TE Connectivity / Madison
TE CONNECTIVITY / MADISON CABLE
TE CONNECTIVITY / MICRODOT
TE Connectivity / Microdot Brand
TE Connectivity / Midtex
TE Connectivity / Midtex Brand
TE Connectivity / Nanonics
TE Connectivity / Nanonics Brand
TE Connectivity / Neohm
TE Connectivity / Neohm Brand
TE Connectivity / OEG
TE Connectivity / OEG Brand
TE Connectivity / P&B
TE Connectivity / P&B Brand
TE Connectivity / Polamco
TE CONNECTIVITY / POTTER & BRUMFIELD
TE CONNECTIVITY / POTTER-BRUMFIELD
TE CONNECTIVITY / PRODUCTS UNLIMITED
TE Connectivity / Products Unlimited Brand
TE Connectivity / Q-Cees
TE Connectivity / Raychem
TE Connectivity / Raychem Brand
TE Connectivity / Schrack
TE Connectivity / Schrack Brand
TE Connectivity / Sensor
TE Connectivity / Sigma Inductors
TE Connectivity / TE Deutsch ICT
TE Connectivity /CGS Brand
TE Connectivity Aerospace, Defense and Marine
TE Connectivity Alcoswitch Switches
TE Connectivity AMP Connectors
TE Connectivity Corcom Filters
TE Connectivity Deutsch Connectors
TE Connectivity Divested
TE Connectivity Energy
TE Connectivity Measurement Specialties
TE Connectivity Passive Product
TE Connectivity Potter & Brumfield Relays
TE Connectivity Raychem Cable Protection
TE Connectivity Raychem Circuit Protection
TE CONNECTIVITY SENSORS
TE CONNECTIVITY/ CHIPS COOLERS BRAND
TE CONNECTIVITY/ CII BRAND
TE CONNECTIVITY/ABB ENTRELEC
TE Connectivity/Agastat Brand
TE Connectivity/Amp Brand
TE Connectivity/COEV Magnetics
TE CONNECTIVITY/DEUTSCH
TE Connectivity/Kilovac Brand
TE Connectivity/Madison Cable
TE CONNECTIVITY/PRODUCTS UNL
TE Connectivity/Sigma Inductors
TE SENSOR SOLUTIONS
TEConnectivity
TEConnectivity/AMP
TES
TYC
Tyco
TYCO AMP
Tyco Electronics
Tyco Lucent Tech
TYCO POWER SYSTEMS
TYCO TB
TYCO/CHIPCOOLERS

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted