Product Information

58641-2

58641-2 electronic component of TE Connectivity

Datasheet
TE Connectivity AMP Punches & Dies PROCRIMP DIE MOD IV

Manufacturer: TE Connectivity
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 229.8838 ea
Line Total: USD 229.8838

10 - Global Stock
Ships to you between
Wed. 10 Apr to Fri. 12 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
2 - Global Stock


Ships to you between Thu. 04 Apr to Wed. 10 Apr

MOQ : 1
Multiples : 1

Stock Image

58641-2
TE Connectivity

1 : USD 247.9444
3 : USD 244.23
5 : USD 240.555
10 : USD 236.9456
25 : USD 216.5362

10 - Global Stock


Ships to you between Wed. 10 Apr to Fri. 12 Apr

MOQ : 1
Multiples : 1

Stock Image

58641-2
TE Connectivity

1 : USD 229.8838
5 : USD 226.1165
10 : USD 218.5816
25 : USD 211.0468
50 : USD 210.745
100 : USD 210.745
250 : USD 210.745
500 : USD 205.6614

2 - Global Stock


Ships to you between Thu. 04 Apr to Wed. 10 Apr

MOQ : 1
Multiples : 1

Stock Image

58641-2
TE Connectivity

1 : USD 290.1156

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
Type
Brand
Factory Pack Quantity :
Packaging
Cnhts
Hts Code
Product Type
Subcategory
Taric
Tradename
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
5864-5001-10 electronic component of TE Connectivity 5864-5001-10

RF Connectors / Coaxial Connectors MCX RA JCK PCB .155LG
Stock : 0

5864-5002-10 electronic component of TE Connectivity 5864-5002-10

RF Connectors / Coaxial Connectors OSX RA PCB JACK MICRO MIN SMT
Stock : 300

5864-5003-10 electronic component of TE Connectivity 5864-5003-10

RF Connectors / Coaxial Connectors MCX RA JCK PCB .115LG
Stock : 0

586435-000 electronic component of TE Connectivity 586435-000

Two Conductor Cable, Shielded, Jacketed, General Purpose, Flexible, 600 Volt
Stock : 0

5864-5001-09 electronic component of TE Connectivity 5864-5001-09

TE Connectivity Buchanan RF Connectors Coaxial Connectors PCB RA Jack Rcept 50 OHM
Stock : 11

586695-000 electronic component of TE Connectivity 586695-000

Multi-Conductor Cables 55PC2121-24-6/9-9CS2619
Stock : 0

58654-2 electronic component of TE Connectivity 58654-2

TE Connectivity Crimpers PRO-CRIMPER TOOL AND DIE
Stock : 8

5-867052-1 electronic component of TE Connectivity 5-867052-1

Headers & Wire Housings LCKING CLIP ASSY Reel of 7000
Stock : 200

58654-1 electronic component of TE Connectivity 58654-1

Punches & Dies PRO-CRIMP TL & DIE MOD II
Stock : 9

586543-000 electronic component of TE Connectivity 586543-000

Heat Shrink Cable Boots & End Caps 502A834-100-G07/180-0
Stock : 2

Image Description
600618326200 electronic component of Wurth 600618326200

Crimpers / Crimping Tools Crimp die "A" For ConDSUB 6180
Stock : 0

600881 electronic component of TE Connectivity 600881

TE Connectivity Punches & Dies RIGHT DIE ASSY (ASI)
Stock : 1

601092 electronic component of TE Connectivity 601092

TE Connectivity Punches & Dies AMPSULATION DWP31 316" X 48"
Stock : 5

62100-0900 electronic component of Molex 62100-0900

Crimpers / Crimping Tools BKSHELL CRMP TOOL 9P 1 Piece Tool
Stock : 0

62100-9800 electronic component of Molex 62100-9800

Crimpers / Crimping Tools IDT Hand Crimper For Discrete Wire
Stock : 4

63443-3410 electronic component of Molex 63443-3410

Punches & Dies CUT-OFF PUNCH
Stock : 2

63444-0805 electronic component of Molex 63444-0805

Molex Punches & Dies CONDUCTOR PUNCH
Stock : 8

63444-1018 electronic component of Molex 63444-1018

Punches & Dies PUNCH TOOL
Stock : 13

63444-1116 electronic component of Molex 63444-1116

Molex Punches & Dies PUNCH
Stock : 3

63444-1204 electronic component of Molex 63444-1204

Molex Punches & Dies PUNCH PUNCH
Stock : 0

Instruction Sheet PRO-CRIMPER*IIIHandCrimping ToolAssembly58641-1with 408--4379 DieAssembly58641-2 18 JUN 09 Rev A PROPERUSEGUIDELINES CumulativeTraumaDisorderscanresultfromtheprolongeduseofmanuallypoweredhandtools.Handtoolsareintendedforoccasionaluseandlowvolume applications.Awideselectionofpoweredapplicationequipmentforextended--use,productionoperationsisavailable. Locator Assembly Stationary Jaw (Supplied with Die Assembly) Back of Tool (Wire Side) Front of Tool (Locator Side) Pivot Pin PRO--CRIMPER III Hand Crimping Tool Frame Die Assembly 354940--1 ( 408--9930) Moving Jaw Ratchet Adjustment Wheel ThePRO--CRIMPERIIIHandCrimpingTool isaCommercialgradetool and Stationary Handle isdesignedprimarilyforfieldinstallation,repair,maintenancework,or prototypinginindustrial,commercial,orinstitutional applications.Product crimpedwiththistool will meetthecrimpheightrequirementforhandtoolsin theappropriate114seriesspecification,butmaynotcomplywithotherfeature parametersofthespecification.TycoElectronicsoffersavarietyoftoolsto Moving Handle satisfyyourperformancerequirements.Foradditional information,contactthe Tooling Assistance Center at 1--800--722--1111. Wire TEDieAssembly LocatorAssembly ContactFamily Size InsulDia StripLength (AWG) (mm in. ) (mm in. ) 26 -- 24 1.021.02 ---- 1.521.52 44.37.37 ---- 3.583.58 5864158641--22 5851658516--11 AAMMPPMOMODDUU** IIVV .040 -- .060 .172 -- .141 22 Suppliedwithdieassembly,alsoavailableseparately. ContacttheToolingAssistanceCenterortheProduct InformationCenter(seebelow)forspecificcontactpartnumbers. Figure 1 1. INTRODUCTION Dimensions on this sheet are in millimeters with NOTE inch equivalents provided in brackets . Figures and illustrations are for identification only and are i PRO--CRIMPER III Hand Crimping Tool Assembly not drawn to scale. 58641--1 consists of Die Assembly 58641--2 and PRO--CRIMPER III Hand Crimping Tool Frame 354940--1. The die assembly consists of crimping 2. DESCRIPTION (Figures1 and 2) dies and a locator assembly. The tool features a tool frame with a stationary jaw and handle, a moving jaw, a moving handle, and an Read these instructions thoroughly before crimping adjustable ratchet that ensures full contact crimping. any contacts. The tool frame holds a die assembly with two crimping sections. Reasons for revision can be found in Section 11, The die assembly features a wire anvil, an insulation REVISION SUMMARY. anvil, a wire crimper, and an insulation crimper. E2009 Tyco Electronics Corporation, Harrisburg, PA TOOLING ASSISTANCE CENTER1--800--722--1111 This controlled document is subject to change. 1 of 5 PRODUCT INFORMATION1--800--522--6752 Forlatest revision and Regional CustomerService, All International Rights Reserved visit ourwebsite atwww.tycoelectronics.com TE logo and Tyco Electronics are trademarks. LOCB *Trademark. Otherproducts, logos, and company names used are the property of theirrespective owners.408-4379 PRO-CRIMPERIIIHandCrimpingToolAssembly58641-1 Nut Locator Tool Frame Assembly Insulation Die Retaining Pins Crimper Chamfer Wire Crimper Offset Wire Anvil Chamfer Insulation Anvil Die Retaining Screws Figure 2 Attached to the outside of the frame is a locator screw just enough to hold the dies in place. Do not assembly, which contains a locator, a spring retainer, tighten the screw completely at this time. and a contact support. 8. Carefully close the tool handles, making sure Die retaining pins and die retaining screws are used that the anvils and crimpers align properly. to position and secure the dies in the tool frame. A Continue closing the tool handles until the ratchet nut is used on the upper die retaining screw to hold in the tool frame has engaged sufficiently to hold the locator assembly in place. the anvils and crimpers in place, then tighten both die retaining screws. 9. Place the locator assembly over the end of the 3. INSTALLATIONANDREMOVALOFDIESET long screw, and position the locator assembly ANDLOCATORASSEMBLY (Figure 2) against the side of the tool jaw. 1. Open the tool handles and remove the two die retaining screws from the tool jaws. 10. Place the nut onto the end of the long screw and tighten the nut enough to hold the locator 2. Place the wire anvil and insulation anvil so that assembly in place, while still allowing the locator to their chamfered sides and their marked surfaces slide up and down. face outward, when mounted in the moving jaw of the tool frame. 11. To disassemble, close the tool handles until the ratchet releases, remove the nut, the locator 3. Insert the two die retaining pins. assembly, the two die retaining screws, and the four die retaining pins, and slide the anvils and 4. Insert the short die retaining screw through the crimpers out of the tool jaws. jaw and through both anvil dies, and tighten the screw just enough to hold the dies in place. Do not tighten the screw completely at this time. 4. CONTACTSUPPORTADJUSTMENT (Figure 3) 5. Place the wire crimper and insulation crimper so The contact support is preset prior to shipment, NOTE that their chamfered sides and their marked but minor adjustment may be necessary. surfaces face outward, when mounted in the stationary jaw of the tool frame. i 6. Insert the two die retaining pins. 1. Make a sample crimp and determine if the 7. Insert the long die retaining screw through the contact is straight, bending upward, or bending jaw and through both crimper dies, and tighten the downward. 2 of 5 TycoElectronicsCorporation RevA

Tariff Desc

8205.10.00 Hand tools (including glaziers diamonds), not elsewhere specified or included; blow lamps; vices, clamps and the like, other than accessories for and parts of, machine-tools; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks. Drilling, threading or tapping tools
AGASTAT - TE CONNECTIVITY
ALCOSWITCH - TE CONNECTIVITY
Alpha Sensors
AMP - TE CONNECTIVITY
AMP FROM TE CONNECTIVITY
AMP/TYCO
AUGAT - TE CONNECTIVITY
AXICOM - TE CONNECTIVITY
AXIOHM
AXIOHM / TXCOM
BUCHANAN - TE CONNECTIVITY
CGS - TE CONNECTIVITY
CII - TE CONNECTIVITY
CITEC - TE CONNECTIVITY
CORCOM - TE CONNECTIVITY
CROMPTON - TE CONNECTIVITY
Deutsch
Deutsch Group
DEUTSCH UK
ELCON - TE CONNECTIVITY
Entrelec
ENTRELEC - TE CONNECTIVITY
ENTRELEC UK
ERNI
ERNI COMPONENTS
ERNI Elec
ERNI ELECTRONICS
GREENPAR - TE CONNECTIVITY
HOLSWORTHY - TE CONNECTIVITY
HTS - TE CONNECTIVITY
HUM
Kemtron
KILOVAC-TE CONNECTIVITY
Laird External Antennas
LUCENT TECH / TYCO
MADISON CABLE / TE
MADISONCABLE - TE CONNECTIVITY
Measurement Specialties
Measurement Specialties Inc.
Measurement Specialties, Inc.
NEOHM
NEOHM - TE CONNECTIVITY
OEG - TE CONNECTIVITY
PLM
Polamco
POLAMCO - TE CONNECTIVITY
POTTER&BRUMFIELD - TE CONNECTIVITY
PRODUCTSUNLIMITED - TE CONNECTIVITY
RAYCHEM
RAYCHEM - TE CONNECTIVITY
RAYCHEM RPG
RYC
SCHRACK
SCHRACK - TE CONNECTIVITY
SENSOR SOLUTIONS - TE CONNECTIVITY
SIGMA
SIGMAINDUCTORS - TE CONNECTIVITY
TE
TE Application Tooling
TE CONNECTIVITY
TE Connectivity ADC
TE Connectivity Agastat
TE Connectivity Alcoswitch
TE Connectivity AMP
TE Connectivity Axicom
TE Connectivity Buchanan
TE Connectivity CGS
TE Connectivity CII
TE Connectivity Citec
TE Connectivity CO-EV
TE Connectivity Corcom
TE Connectivity DEUTSCH
TE Connectivity Hartman
TE Connectivity Holsworthy
TE Connectivity Kilovac
TE Connectivity Madison
TE Connectivity Nanonics
TE Connectivity Neohm
TE Connectivity OEG
TE Connectivity P&B
TE Connectivity Products Unlimited
TE Connectivity Q-Cees
TE Connectivity Raychem
TE Connectivity Schrack
TE Connectivity Sigma Inductors
TE Connectivity / ABB Entrelec
TE Connectivity / Agastat
TE Connectivity / Agastat Brand
TE Connectivity / Alcoswitch
TE Connectivity / Alcoswitch Brand
TE Connectivity / AMP
TE Connectivity / AMP Asia
TE Connectivity / AMP Brand
TE CONNECTIVITY / AUGAT
TE Connectivity / Axicom
TE Connectivity / Buchanan
TE Connectivity / Buchanan Brand
TE Connectivity / CGS
TE Connectivity / CGS Brand
TE Connectivity / Chip Coolers Brand
TE Connectivity / CII
TE Connectivity / CII Brand
TE CONNECTIVITY / CITEC
TE Connectivity / Citec Brand
TE Connectivity / CO-EV
TE Connectivity / CoEv Magnetics Brand
TE Connectivity / Corcom
TE Connectivity / Corcom Brand
TE Connectivity / Critchley Brand
TE CONNECTIVITY / CROMPTON
TE Connectivity / DEUTSCH
TE CONNECTIVITY / DEUTSCH AUTOMOTIVE
TE CONNECTIVITY / ELCON
TE Connectivity / Elcon Brand
TE Connectivity / Energy
TE CONNECTIVITY / ENERGY DIVISION
TE Connectivity / Entrelec
TE Connectivity / ERNI
TE CONNECTIVITY / GREENPAR
TE Connectivity / Hartman
TE Connectivity / Hartman Brand
TE Connectivity / Hirschmann
TE Connectivity / Holsworthy
TE Connectivity / Holsworthy Brand
TE CONNECTIVITY / HTS
TE Connectivity / Intercontec
TE Connectivity / Kemtron
TE Connectivity / Kilovac
TE Connectivity / Kilovac Asia
TE Connectivity / Kilovac Brand
TE Connectivity / Kissling
TE Connectivity / Laird External Antennas
TE Connectivity / Linx Technologies
TE Connectivity / Madison
TE CONNECTIVITY / MADISON CABLE
TE CONNECTIVITY / MICRODOT
TE Connectivity / Microdot Brand
TE Connectivity / Midtex
TE Connectivity / Midtex Brand
TE Connectivity / Nanonics
TE Connectivity / Nanonics Brand
TE Connectivity / Neohm
TE Connectivity / Neohm Brand
TE Connectivity / OEG
TE Connectivity / OEG Brand
TE Connectivity / P&B
TE Connectivity / P&B Brand
TE Connectivity / Polamco
TE CONNECTIVITY / POTTER & BRUMFIELD
TE CONNECTIVITY / POTTER-BRUMFIELD
TE CONNECTIVITY / PRODUCTS UNLIMITED
TE Connectivity / Products Unlimited Brand
TE Connectivity / Q-Cees
TE Connectivity / Raychem
TE Connectivity / Raychem Brand
TE Connectivity / Schrack
TE Connectivity / Schrack Brand
TE Connectivity / Sensor
TE Connectivity / Sigma Inductors
TE Connectivity / TE Deutsch ICT
TE Connectivity /CGS Brand
TE Connectivity Aerospace, Defense and Marine
TE Connectivity Alcoswitch Switches
TE Connectivity AMP Connectors
TE Connectivity Corcom Filters
TE Connectivity Deutsch Connectors
TE Connectivity Divested
TE Connectivity Energy
TE Connectivity Measurement Specialties
TE Connectivity Passive Product
TE Connectivity Potter & Brumfield Relays
TE Connectivity Raychem Cable Protection
TE Connectivity Raychem Circuit Protection
TE CONNECTIVITY SENSORS
TE CONNECTIVITY/ CHIPS COOLERS BRAND
TE CONNECTIVITY/ CII BRAND
TE CONNECTIVITY/ABB ENTRELEC
TE Connectivity/Agastat Brand
TE Connectivity/Amp Brand
TE Connectivity/COEV Magnetics
TE CONNECTIVITY/DEUTSCH
TE Connectivity/Kilovac Brand
TE Connectivity/Madison Cable
TE CONNECTIVITY/PRODUCTS UNL
TE Connectivity/Sigma Inductors
TE SENSOR SOLUTIONS
TEConnectivity
TEConnectivity/AMP
TES
TYC
Tyco
TYCO AMP
Tyco Electronics
Tyco Lucent Tech
TYCO POWER SYSTEMS
TYCO TB
TYCO/CHIPCOOLERS

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted