SCALE-2 1SP0635x2x1-33 1SP0635x2x1-33 Data Sheet Compact, high-performance, plug-and-play single-channel IGBT driver based on SCALE-2 technology for individual and parallel-connected modules in 2-level, 3-level and multilevel converter topologies Abstract The SCALE-2 plug-and-play driver 1SP0635x2x1-33 is a compact single-channel intelligent gate driver designed for 3300V 130x140mm and 190x140mm IGBT modules. The master driver 1SP0635x2M1-33 features a fiber-optic interface with a built-in isolated DC/DC power supply. It can be used as stand-alone driver or in conjunction with up to three 1SP0635D2S1-33 slaves to drive up to four parallel-connected IGBT modules. The turn-on and turn-off gate resistors as well as the auxiliary gate capacitor are not assembled in order to provide maximum flexibility. They must be assembled by the user before start of operation. Please refer to the paragraph on Gate Resistor and Auxiliary Gate Capacitor Assembly for the recommended values. For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to: www.power.com/gate-driver/go/plug-and-play Features Applications Plug-and-play solution Allows parallel connection of IGBT modules For 2-level, 3-level and multilevel topologies Traction Built-in isolated DC/DC power supply (master) Railroad power supplies Fiber-optic links (master) Light rail vehicles Built-in interface to 1SP0635D2S1 (slave) HVDC Duty cycle 0...100% Flexible AC transmission systems (FACTS) 2 Dynamic Advanced Active Clamping DA C Medium-voltage converters Dynamic IGBT short-circuit protection Industrial drives Monitoring of supply voltage Wind-power converters Monitoring of gate voltage Medical applications Extremely reliable long service life Research Shortens application development time And many others Suitable for 3300V 130x140mm and 190x140mm IGBT modules www.power.com/gate-driver Page 1 SCALE-2 1SP0635x2x1-33 Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to the Description & Application Manual for 1SP0635 SCALE-2 IGBT Drivers on www.power.com/gate-driver/go/1SP0635. The gate resistors as well as the auxiliary gate capacitor on this gate driver are not assembled in order to provide maximum flexibility. For the values required for specific IGBT modules, refer to the paragraph on Gate Resistor and Auxiliary Gate Capacitor Assembly. Use of gate resistors and gate auxiliary capacitors other than those specified may result in failure. Mechanical Dimensions Dimensions: Refer to the relevant Description and Application Manual Mounting principle: Connected to IGBT module with screws Fiber-Optic Interfaces (1SP0635x2M1) Interface Remarks Part type Drive signal input 1SP0635V, fiber-optic receiver (Notes 1, 2) HFBR-2522ETZ Drive signal input 1SP0635S, fiber-optic receiver (Notes 1, 2) HFBR-2412Z Status output 1SP0635V, fiber-optic transmitter (Notes 1, 3) HFBR-1522ETZ Status output 1SP0635S, fiber-optic transmitter (Notes 1, 3) HFBR-1412Z Electrical Connectors Interface Remarks Part type Power supply connector X1 1SP0635x2M1, on-board connector (Note 4) 214012 Bus connectors X2 and X3 On-board connectors (Note 5) 214013 www.power.com/gate-driver Page 2