Conductive Polymer Aluminum Solid Capacitors
Radial Lead Type
Series : SEPC
Features
Super low ESR (5 m to 24 m)
Large capacitance (2700 F max.)
RoHS compliance, Halogen free
Specifi cations
Size code B9 C55 C6 C9 E7 E9 E12 E13 F13
Category temperature range 55 C to +105 C
Rated voltage range (V.DC) 2.5 6.3 2.5 to 16 6.3 to 16 2.5 to 16 16 2.5 to 6.3 2.5 to 16
Rated capacitance range (F) 100 to 560 220 100 to 560 100 to 820 150 to 1000 180 to 1000 180 to 270 470 to 820 470 to 2700
Capacitance tolerance 20 % (120 Hz / + 20 C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
+105 C, 5000 h, rated voltage applied
Capacitance change Within 20 % of the initial value
Endurance
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit
+60 C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change Within 20 % of the initial value
Damp heat
(Steady State)
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking Dimensions (not to scale)
E12, E13, F13 Size
Unit : mm
fd
Size code fD0.5 L max. F0.5 fd0.05
+
B9 5.0 9.0 2.0 0.6
Polarity marking ()
C55 6.3 5.5 2.5 0.45
15 min. 4 min.
1
Lot. No.
C6 6.3 6.0 2.5 0.45
L
19 min.
C9 6.3 9.0 2.5 0.6
Series
2
B9, C55, C6, C9, E7, E9 Size
E7
8.0 7.0 3.5 0.6
fd
E9 8.0 9.0 3.5 0.6
R. Capacitance +
E12 8.0 12.0 3.5 0.6
R. Voltage
E13 8.0 13.0 3.5 0.6
15 min. 4 min. F13
10.0 13.0 5.0 0.6
L 19 min.
1 2SEPC390M, 2SEPC560M : 0.50.05
B9, C55, C6, C9, E7, E9 size flat rubber is used. 2 16SEPC150MD, 10SEPC270M : 0.450.05
Externals of gure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Nov. 2015
fD fD
F FConductive Polymer Aluminum Solid Capacitors
Characteristics list
Case size (mm) Specifications
Rated Rated
1
Size Ripple
2 4
Series voltage capacitance Part number
ESR LC
3
L code current tan d
fD
(V.DC) (F)
(m max.) (A)
(mAr.m.s.)
100 5.0 9.0 4180 7 0.10 500 2SEPC100MZ
B9
300 5.0 9.0 4180 7 0.10 500 2SEPC330MZ
390 6.3 6.0 C6 3900 10 0.12 500 2SEPC390M
470 5.0 9.0 4180 7 0.10 500 2SEPC470MZ
B9
5.0 9.0 4180 7 0.10 500 2SEPC560MZ
6.3 6.0 C6 3900 10 0.12 500 2SEPC560M
560
6.3 9.0 C9 5600 7 0.10 500 2SEPC560MW
2.5 8.0 9.0 E9 4700 8 0.10 280 2SEPC560MX
6.3 9.0 C9 5600 7 0.10 500 2SEPC820MW
8.0 7.0 E7 5300 8 0.10 500 2SEPC820MD
820 8.0 9.0 6100 7 0.10 500 2SEPC820MX
E9
8.0 9.0 7200 5 0.10 500 2SEPC820MY
8.0 13.0 E13 6100 7 0.10 500 2R5SEPC820M
1000 8.0 9.0 E9 6100 7 0.10 500 2SEPC1000MX
2700 10.0 13.0 F13 5560 10 0.10 1350 2SEPC2700M
6.3 9.0 C9 5600 7 0.10 500 4SEPC560MW
560 8.0 9.0 E9 6100 7 0.10 500 4SEPC560MX
4.0 8.0 13.0 6100 7 0.10 500 4SEPC560M
E13
680 8.0 13.0 6100 7 0.10 544 4SEPC680M
SEPC 820 10.0 13.0 F13 6640 7 0.10 656 4SEPC820M
220 6.3 5.5 C55 2980 18 0.12 280 6SEPC220M
6.3 9.0 C9 5600 7 0.10 592 6SEPC470MW
470 8.0 9.0 E9 5700 8 0.10 592 6SEPC470MX
8.0 13.0 E13 5700 8 0.10 592 6SEPC470M
6.3 6.3 9.0 C9 5600 7 0.10 705 6SEPC560MW
560
8.0 9.0 E9 6100 7 0.10 705 6SEPC560MX
680 10.0 13.0 E13 6640 7 0.10 857 6SEPC680M
1000 8.0 7.0 E7 3530 18 0.10 1260 6SEPC1000MD
1500 10.0 13.0 F13 5560 10 0.10 1890 6SEPC1500M
10 270 8.0 7.0 E7 3220 22 0.12 500 10SEPC270MD
6.3 6.0 C6 2490 24 0.10 320 16SEPC100M
100
6.3 9.0 C9 4680 10 0.10 500 16SEPC100MW
150 8.0 7.0 E7 3220 22 0.12 500 16SEPC150MD
8.0 9.0 E9 5000 10 0.10 576 16SEPC180MX
180
16 8.0 12.0 E12 4360 16 0.10 576 16SEPC180M
220 8.0 7.0 E7 4150 13 0.10 500 16SEPC220MD
8.0 9.0 E9 5000 10 0.10 864 16SEPC270MX
270
8.0 12.0 E12 5000 11 0.10 864 16SEPC270M
470 10.0 13.0 F13 6100 10 0.10 1504 16SEPC470M
1 Ripple current (100 kHz/ +105 C ), 2 ESR (100 kHz to 300 kHz/+20 C) 3 tan d (120 Hz/+20 C) 4 After 2 minutes
Please refer to each page in this catarog for Flow conditions and Taping specifications.
Frequency correction factor for ripple current
Frequency 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz
< < < <
Coef cient 0.05 0.3 0.7 1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Nov. 2015