Product Information

G5V-1-DC12-BY-OMZ/C

Product Image X-ON

Relays Through Hole RoHS
Manufacturer: Omron


Price (Ex GST)

From 1.1897

67 - Global Stock
Ships to you between
Fri. 04 Dec to Thu. 10 Dec
MOQ: 1 Multiples:
Pack Size :   1
Availability Price Quantity
67 - Global Stock


Ships to you between Fri. 04 Dec to Thu. 10 Dec
Calender

MOQ : 1
Multiples : 1
1 : $ 1.9153
10 : $ 1.4254
30 : $ 1.3369
100 : $ 1.2486
500 : $ 1.2081
1000 : $ 1.1897

Buy
         
Manufacturer
Omron
Product Category
General Purpose Relays
Contact Form
Spdt
Switching Voltage
(125 VAC , 60 VDC ) Max
Coil Type
Non Latching
Coil Voltage
12 VDC
Category
General Purpose Relays
Rohs
Y
Package
THROUGH HOLE
Brand Category
Omron
Relay Type
General Purpose
Contact Rating Current
1 A
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Stock Image G5V1FDC24
Signal Relay 24VDC 1A SPDT(12.5x8x10)mm SMD
Stock : 845
Stock Image G5V1FTRDC12
SMT Tape And Reel Relay.
Stock : 1
Stock Image G5V-1-DC6
Low Signal Relays - PCB ThruHole Hi-Sens SPDT 6DC 150mW Seal
Stock : 690
Stock Image G5V-1-DC3
Low Signal Relays - PCB ThruHole Hi-Sens SPDT 3DC 150mW Seal
Stock : 54
Stock Image G5V-1-DC5
Low Signal Relays - PCB ThruHole Hi-Sens SPDT 5DC 150mW Seal
Stock : 758
Stock Image G5V-1-DC24
Low Signal Relays - PCB Thru-hole Hi-Sens SPDT 24DC 150mW Seal
Stock : 10080
Stock Image G5V-1-DC9
Omron Electronics Low Signal Relays - PCB ThruHole Hi-Sens SPDT 9DC 150mW Seal
Stock : 591
Stock Image G5V-1-T90 DC12
Low Signal Relays - PCB Ultra-Mini, Hi Temp SPDT 1A, 12VDC
Stock : 519
Stock Image G5V-1 DC24V
Signal Relay 24VDC 1A SPDT(12.5x7.5x10)mm THT
Stock : 27
Image Description
Stock Image G6D-1A-ASI-DC24-BY-OMB
Relays Through Hole RoHS
Stock : 343
Stock Image G6K-2F-Y-DC5-BY-OMR/C
Relays SMD RoHS
Stock : 1048
Stock Image G6K-2F-Y-TR-DC5-BY-OMR/C
Relays SMD RoHS
Stock : 884
Stock Image G7L-2A-P-DC12-BY-OMI
Relays Through Hole RoHS
Stock : 43
Stock Image HF49FD/012-1H11G
Relays General Purpose Non Latching 12VDC SPST 5A (250VAC, 30VDC) Max DIP RoHS
Stock : 46
Stock Image HF49FD/024-1H12G
Relays General Purpose Non Latching 24VDC SPST 5A (250VAC, 30VDC) Max DIP RoHS
Stock : 81
Stock Image HF49FD/005-1H12T
Relays General Purpose Non Latching 5VDC SPST 5A (250VAC, 30VDC) Max DIP RoHS
Stock : 1020
Stock Image HF41F/24-ZST
Relays General Purpose Non Latching 24VDC SPDT 6A (400VAC, 125VDC) Max DIP RoHS
Stock : 65
Stock Image HF41F/24-ZSTG
Relays DIP RoHS
Stock : 10
Stock Image HF32FA-T/012-HSL2
Relays General Purpose Non Latching 12VDC SPST 5A (250VAC, 30VDC) Max DIP RoHS
Stock : 66

- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (?) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 m? max. Operate time 5 ms max. Release time 5 ms max. 1,000 M? min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 ?. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (O) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 mO max. Operate time 5 ms max. Release time 5 ms max. 1,000 MO min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 O. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay ?Engineering Data ?Maximum Switching Capacity ?Durability ?Ambient Temperature vs. Maximum Coil Voltage 5 500 250 300 3 200 24 VDC resistive load 100 150 1 70 50 0.7 0.5 100 30 0.3 50 125 VAC 10 resistive load DC resistive load AC resistive 7 load 5 0 0.1 10 30 50 70 100 300 500 0 0.2 0.4 0.6 0.8 1.0 1.2 -40 -20 0 20 40 60 70 80 Switching voltage (V) Switching current (A) Ambient temperature (?C) Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. ?Ambient Temperature vs. Must ?Shock Malfunction Operate or Must Release Voltage 100 Y Sample: G5V-1 1,000 G Number of Relays: 10 pcs max. 5 800 X 80 V 600 X Z min. 1 1,000 1,000 400 60 200 200 40 max. 400 De- X 1,000 1,000 energized Z' X' 600 min. 20 800 Shock direction XX' Energized Must operate voltage 1,000 Y Must release voltage Y' 2 0 Z Unit: m/s -60 -40 -20 0 20 40 60 80 100 Sample: G5V-1 12 VDC Z' Y' Number of Relays: 10 pcs Ambient temperature (?C) Test conditions: Shock is applied in ?X, ?Y, and ?Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. ?Dial Pulse Test *1 ?Contact Reliability Test *1, *2 80 1,000 Sample: G5V-1 12 VDC NO contact 70 Must operate voltage Number of Relays: 10 pcs max. Test conditions: Resistive NC contact 60 500 load at 5 VDC 1 mA 400 50 min. Switching frequency: Must release voltage 300 max. 7,200 operations/h 40 30 200 min. 20 Sample: G5V-1 12 VDC 10 100 Number of Relays: 6 pcs max. 1,000 Test conditions: Contact load WJ-139 (with arc-killer) max. 500 50 Switching frequency: 20PPS max. 300 40 NO NC 30 100 contact contact min. min. 50 20 Contact resistance max. 30 min. min. 10 10 0 50 100 500 1,000 5,000 10,000 50,000 0 5 10 50 100 500 1,000 3 4 Operating frequency (?10 operations) Rotation (?10 turns) *1. The tests were conducted at an ambient temperature of 23?C. *2. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. ?High-frequency Characteristics ? Test Conditions G5V-1 HR 8502A HR 8502A RF Network Transmission R analyzer reflection HP A test-set 8501A 50? Storage Terminator Note: The high-frequency characteristics data were measured using a dedicated circuit board and B normalizer actual values will vary depending on the usage conditions. Check the characteristics of the actual Terminals which were not being measured were terminated with 50 ?. equipment being used. Measuring impedance: 50 ? 2 On the basis of rated voltage (%) Contact resistance (m?) On the basis of rated voltage (%) Switching current (A) 4 Contact resistance (m?) Durability (x10 operations) Maximum coil voltage (%)- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (O) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 mO max. Operate time 5 ms max. Release time 5 ms max. 1,000 MO min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 O. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (O) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 mO max. Operate time 5 ms max. Release time 5 ms max. 1,000 MO min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 O. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay ?Engineering Data ?Maximum Switching Capacity ?Durability ?Ambient Temperature vs. Maximum Coil Voltage 5 500 250 300 3 200 24 VDC resistive load 100 150 1 70 50 0.7 0.5 100 30 0.3 50 125 VAC 10 resistive load DC resistive load AC resistive 7 load 5 0 0.1 10 30 50 70 100 300 500 0 0.2 0.4 0.6 0.8 1.0 1.2 -40 -20 0 20 40 60 70 80 Switching voltage (V) Switching current (A) Ambient temperature (?C) Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. ?Ambient Temperature vs. Must ?Shock Malfunction Operate or Must Release Voltage 100 Y Sample: G5V-1 1,000 G Number of Relays: 10 pcs max. 5 800 X 80 V 600 X Z min. 1 1,000 1,000 400 60 200 200 40 max. 400 De- X 1,000 1,000 energized Z' X' 600 min. 20 800 Shock direction XX' Energized Must operate voltage 1,000 Y Must release voltage Y' 2 0 Z Unit: m/s -60 -40 -20 0 20 40 60 80 100 Sample: G5V-1 12 VDC Z' Y' Number of Relays: 10 pcs Ambient temperature (?C) Test conditions: Shock is applied in ?X, ?Y, and ?Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. ?Dial Pulse Test *1 ?Contact Reliability Test *1, *2 80 1,000 Sample: G5V-1 12 VDC NO contact 70 Must operate voltage Number of Relays: 10 pcs max. Test conditions: Resistive NC contact 60 500 load at 5 VDC 1 mA 400 50 min. Switching frequency: Must release voltage 300 max. 7,200 operations/h 40 30 200 min. 20 Sample: G5V-1 12 VDC 10 100 Number of Relays: 6 pcs max. 1,000 Test conditions: Contact load WJ-139 (with arc-killer) max. 500 50 Switching frequency: 20PPS max. 300 40 NO NC 30 100 contact contact min. min. 50 20 Contact resistance max. 30 min. min. 10 10 0 50 100 500 1,000 5,000 10,000 50,000 0 5 10 50 100 500 1,000 3 4 Operating frequency (?10 operations) Rotation (?10 turns) *1. The tests were conducted at an ambient temperature of 23?C. *2. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. ?High-frequency Characteristics ? Test Conditions G5V-1 HR 8502A HR 8502A RF Network Transmission R analyzer reflection HP A test-set 8501A 50O Storage Terminator Note: The high-frequency characteristics data were measured using a dedicated circuit board and B normalizer actual values will vary depending on the usage conditions. Check the characteristics of the actual Terminals which were not being measured were terminated with 50 O. equipment being used. Measuring impedance: 50 O 2 On the basis of rated voltage (%) Contact resistance (mO) On the basis of rated voltage (%) Switching current (A) 4 Contact resistance (mO) Durability (x10 operations) Maximum coil voltage (%)- G5V-1 Low Signal Relay ?High-frequency Characteristics ?High-frequency Characteristics ?High-frequency Characteristics (Isolation) *1, *2 (Insertion Loss) *1, *2 (Return Loss, V.SWR) *1, *2 (Average value (initial)) (Average value (initial)) (Average value (initial)) 0 0 0 1.4 Sample: G5V-1 Sample: G5V-1 Number of Relays: 5 pcs Number of Relays: 5 pcs 20 10 1.3 0.5 40 20 1.2 Between a-c 1.0 Return loss 60 30 1.1 Between b-c 1.5 80 40 1.0 V.SWR Sample: G5V-1 Number of Relays: 5 pcs Frequency (MHz) 2.0 100 50 1 3 5 10 30 50 100 1 3 5 10 30 50 100 1 3 5 10 30 50 100 Frequency (MHz) Frequency (MHz) Frequency (MHz) ?Must Operate and Must Release ?Distribution of Bounce Time *1 Time Distribution *1 30 30 Sample: G5V-1 12 VDC Sample: Must operate time Operating bounce time Number of Relays: 50 pcs G5V-1 12 VDC Must release time Number of Relays: Release bounce time 25 25 50 pcs 20 20 G 5 15 15 V *1. The tests were conducted at an ambient 1 temperature of 23?C. 10 10 *2. High-frequency characteristics depend on the PCB to which the Relay is mounted. 5 5 Always check these characteristics, including endurance, in the actual machine before use. 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5 6 7 8 Time (ms) Time (ms) ?Dimensions PCB Mounting Holes Terminal Arrangement/ G5V-1 (Bottom View) Internal Connections 7.5 max. (Bottom View) 2.54 6-1 dia. holes (7.3)* 12.5 max. (12.3)* (1.11) 2.54 10 max. ?0.1 5.08 12 5 0.5 (9.9)* 10 9 6 3.5 (1.11) (No coil polarity) 2.54 7.62 0.5 0.5 (1.07) (1.07) 0.3 0.3 10.16?0.1 * Average value Note: indicate the product's directional marks. Note: Each value has a tolerance of ?0.3 mm. ?Approved Standards ?Precautions UL recognized: (File No. E41515) ? Please refer to ?PCB Relays Common Precautions? for correct use. CSA certified: (File No. LR31928) Contact Number of test Model Coil ratings Contact ratings Correct Use form operations 1 A, 30 VDC at 40?C ? Long-term Continuously ON Contacts SPDT 3 to 24 6,000 0.3 A, 110 VDC at 40?C G5V-1 (1c) VDC Using the Relay in a circuit where the Relay will be ON 0.5 A, 125 VAC at 40?C 100,000 continuously for long periods (without switching) can lead to unstable contacts, because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. Be sure to use a fail-safe circuit design that provides protection against contact failure or coil burnout. ? Relay Handling When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40?C. Do not put the Relay in a cold cleaning bath immediately after soldering. 3 Number of contacts Isolation (dB) Number of contacts Insertion loss (dB) Return loss (dB) V.SWR- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (O) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 mO max. Operate time 5 ms max. Release time 5 ms max. 1,000 MO min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 O. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (O) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 mO max. Operate time 5 ms max. Release time 5 ms max. 1,000 MO min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 O. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay ?Engineering Data ?Maximum Switching Capacity ?Durability ?Ambient Temperature vs. Maximum Coil Voltage 5 500 250 300 3 200 24 VDC resistive load 100 150 1 70 50 0.7 0.5 100 30 0.3 50 125 VAC 10 resistive load DC resistive load AC resistive 7 load 5 0 0.1 10 30 50 70 100 300 500 0 0.2 0.4 0.6 0.8 1.0 1.2 -40 -20 0 20 40 60 70 80 Switching voltage (V) Switching current (A) Ambient temperature (?C) Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. ?Ambient Temperature vs. Must ?Shock Malfunction Operate or Must Release Voltage 100 Y Sample: G5V-1 1,000 G Number of Relays: 10 pcs max. 5 800 X 80 V 600 X Z min. 1 1,000 1,000 400 60 200 200 40 max. 400 De- X 1,000 1,000 energized Z' X' 600 min. 20 800 Shock direction XX' Energized Must operate voltage 1,000 Y Must release voltage Y' 2 0 Z Unit: m/s -60 -40 -20 0 20 40 60 80 100 Sample: G5V-1 12 VDC Z' Y' Number of Relays: 10 pcs Ambient temperature (?C) Test conditions: Shock is applied in ?X, ?Y, and ?Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. ?Dial Pulse Test *1 ?Contact Reliability Test *1, *2 80 1,000 Sample: G5V-1 12 VDC NO contact 70 Must operate voltage Number of Relays: 10 pcs max. Test conditions: Resistive NC contact 60 500 load at 5 VDC 1 mA 400 50 min. Switching frequency: Must release voltage 300 max. 7,200 operations/h 40 30 200 min. 20 Sample: G5V-1 12 VDC 10 100 Number of Relays: 6 pcs max. 1,000 Test conditions: Contact load WJ-139 (with arc-killer) max. 500 50 Switching frequency: 20PPS max. 300 40 NO NC 30 100 contact contact min. min. 50 20 Contact resistance max. 30 min. min. 10 10 0 50 100 500 1,000 5,000 10,000 50,000 0 5 10 50 100 500 1,000 3 4 Operating frequency (?10 operations) Rotation (?10 turns) *1. The tests were conducted at an ambient temperature of 23?C. *2. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. ?High-frequency Characteristics ? Test Conditions G5V-1 HR 8502A HR 8502A RF Network Transmission R analyzer reflection HP A test-set 8501A 50O Storage Terminator Note: The high-frequency characteristics data were measured using a dedicated circuit board and B normalizer actual values will vary depending on the usage conditions. Check the characteristics of the actual Terminals which were not being measured were terminated with 50 O. equipment being used. Measuring impedance: 50 O 2 On the basis of rated voltage (%) Contact resistance (mO) On the basis of rated voltage (%) Switching current (A) 4 Contact resistance (mO) Durability (x10 operations) Maximum coil voltage (%)- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (O) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 mO max. Operate time 5 ms max. Release time 5 ms max. 1,000 MO min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 O. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits ? Ultra-miniature at 12.5 ? 7.5 ? 10 mm (L ? W ? H). ? Wide switching power of 1 mA to 1 A. ? High sensitivity: 150 mW nominal coil power consumption. ? Fully-sealed construction offering environment resistance. ? Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 ? 160 ?s) RoHS Compliant ?Model Number Legend ?Application Examples 1. Number of Poles/Contact Form ? Telecommunication equipment G5V-@ ? 1: 1-pole/SPDT (1c) ? Audio-visual products 1 ?Ordering Information G Enclosure Classification Contact form Terminal Shape Model Rated coil voltage Minimun packing unit 5 rating V 3 VDC 1 5 VDC 6 VDC Fully SPDT PCB Standard G5V-1 25 pcs/tube sealed (1c) terminals 9 VDC 12 VDC 24 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5V-1 3 VDC Rated coil voltage 2.A special series of bifurcated crossbar contacts models are also available. ?Ratings ?Coil ?Contacts Must operate Must release Load Rated Coil Max. voltage Power Resistive load voltage voltage Item (V) Rated voltage current resistance consumption (V) (V) Contact type Single crossbar (mA) (O) (mW) % of rated voltage Contact Au-alloy + Ag 3 VDC 50 60 material 5 VDC 30 167 0.5 A at 125 VAC; Rated load 6 VDC 25 240 200% at 1 A at 24 VDC 80% max. 10% min. Approx. 150 9 VDC 16.7 540 23?C Rated carry 12 VDC 12.5 960 2 A current 24 VDC 6.25 3,840 Max. switching 125 VAC, 60 VDC Note 1. The rated current and coil resistance are measured at a coil temperature of 23?C with a tolerance voltage of ?10%. Max. switching 1 A 2.The operating characteristics are measured at a coil temperature of 23?C. current 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. ?Characteristics Contact resistance *1 100 mO max. Operate time 5 ms max. Release time 5 ms max. 1,000 MO min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min Note: The values here are initial values. strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min *1. Measured with 10 mA at 1 VDC with a voltage drop 10 to 55 to 10 Hz, 1.65 mm single amplitude method. Destruction Vibration (3.3 mm double amplitude) *2. Measured with a 500 VDC megohmmeter between resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude coil and contacts and a 250 VDC megohmmeter Malfunction (3.3 mm double amplitude) between contacts with the same polarity applied to 2 Shock Destruction 1,000 m/s the same parts as those used for checking the 2 resistance Malfunction 100 m/s dielectric strength. Mechanical 5,000,000 operations min. (at 36,000 operations/hr) *3. This value was measured at a switching frequency Durability 100,000 operations min. of 120 operations/min and the criterion of contact Electrical (under rated load, at 1,800 operations/hr) resistance is 100 O. Failure rate (P level) (reference value) *3 1 mA at 5 VDC This value may vary depending on the switching Ambient operating temperature -40?C to 70?C (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. 1- G5V-1 Low Signal Relay ?Engineering Data ?Maximum Switching Capacity ?Durability ?Ambient Temperature vs. Maximum Coil Voltage 5 500 250 300 3 200 24 VDC resistive load 100 150 1 70 50 0.7 0.5 100 30 0.3 50 125 VAC 10 resistive load DC resistive load AC resistive 7 load 5 0 0.1 10 30 50 70 100 300 500 0 0.2 0.4 0.6 0.8 1.0 1.2 -40 -20 0 20 40 60 70 80 Switching voltage (V) Switching current (A) Ambient temperature (?C) Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. ?Ambient Temperature vs. Must ?Shock Malfunction Operate or Must Release Voltage 100 Y Sample: G5V-1 1,000 G Number of Relays: 10 pcs max. 5 800 X 80 V 600 X Z min. 1 1,000 1,000 400 60 200 200 40 max. 400 De- X 1,000 1,000 energized Z' X' 600 min. 20 800 Shock direction XX' Energized Must operate voltage 1,000 Y Must release voltage Y' 2 0 Z Unit: m/s -60 -40 -20 0 20 40 60 80 100 Sample: G5V-1 12 VDC Z' Y' Number of Relays: 10 pcs Ambient temperature (?C) Test conditions: Shock is applied in ?X, ?Y, and ?Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. ?Dial Pulse Test *1 ?Contact Reliability Test *1, *2 80 1,000 Sample: G5V-1 12 VDC NO contact 70 Must operate voltage Number of Relays: 10 pcs max. Test conditions: Resistive NC contact 60 500 load at 5 VDC 1 mA 400 50 min. Switching frequency: Must release voltage 300 max. 7,200 operations/h 40 30 200 min. 20 Sample: G5V-1 12 VDC 10 100 Number of Relays: 6 pcs max. 1,000 Test conditions: Contact load WJ-139 (with arc-killer) max. 500 50 Switching frequency: 20PPS max. 300 40 NO NC 30 100 contact contact min. min. 50 20 Contact resistance max. 30 min. min. 10 10 0 50 100 500 1,000 5,000 10,000 50,000 0 5 10 50 100 500 1,000 3 4 Operating frequency (?10 operations) Rotation (?10 turns) *1. The tests were conducted at an ambient temperature of 23?C. *2. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. ?High-frequency Characteristics ? Test Conditions G5V-1 HR 8502A HR 8502A RF Network Transmission R analyzer reflection HP A test-set 8501A 50O Storage Terminator Note: The high-frequency characteristics data were measured using a dedicated circuit board and B normalizer actual values will vary depending on the usage conditions. Check the characteristics of the actual Terminals which were not being measured were terminated with 50 O. equipment being used. Measuring impedance: 50 O 2 On the basis of rated voltage (%) Contact resistance (mO) On the basis of rated voltage (%) Switching current (A) 4 Contact resistance (mO) Durability (x10 operations) Maximum coil voltage (%)- G5V-1 Low Signal Relay ?High-frequency Characteristics ?High-frequency Characteristics ?High-frequency Characteristics (Isolation) *1, *2 (Insertion Loss) *1, *2 (Return Loss, V.SWR) *1, *2 (Average value (initial)) (Average value (initial)) (Average value (initial)) 0 0 0 1.4 Sample: G5V-1 Sample: G5V-1 Number of Relays: 5 pcs Number of Relays: 5 pcs 20 10 1.3 0.5 40 20 1.2 Between a-c 1.0 Return loss 60 30 1.1 Between b-c 1.5 80 40 1.0 V.SWR Sample: G5V-1 Number of Relays: 5 pcs Frequency (MHz) 2.0 100 50 1 3 5 10 30 50 100 1 3 5 10 30 50 100 1 3 5 10 30 50 100 Frequency (MHz) Frequency (MHz) Frequency (MHz) ?Must Operate and Must Release ?Distribution of Bounce Time *1 Time Distribution *1 30 30 Sample: G5V-1 12 VDC Sample: Must operate time Operating bounce time Number of Relays: 50 pcs G5V-1 12 VDC Must release time Number of Relays: Release bounce time 25 25 50 pcs 20 20 G 5 15 15 V *1. The tests were conducted at an ambient 1 temperature of 23?C. 10 10 *2. High-frequency characteristics depend on the PCB to which the Relay is mounted. 5 5 Always check these characteristics, including endurance, in the actual machine before use. 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5 6 7 8 Time (ms) Time (ms) ?Dimensions PCB Mounting Holes Terminal Arrangement/ G5V-1 (Bottom View) Internal Connections 7.5 max. (Bottom View) 2.54 6-1 dia. holes (7.3)* 12.5 max. (12.3)* (1.11) 2.54 10 max. ?0.1 5.08 12 5 0.5 (9.9)* 10 9 6 3.5 (1.11) (No coil polarity) 2.54 7.62 0.5 0.5 (1.07) (1.07) 0.3 0.3 10.16?0.1 * Average value Note: indicate the product's directional marks. Note: Each value has a tolerance of ?0.3 mm. ?Approved Standards ?Precautions UL recognized: (File No. E41515) ? Please refer to ?PCB Relays Common Precautions? for correct use. CSA certified: (File No. LR31928) Contact Number of test Model Coil ratings Contact ratings Correct Use form operations 1 A, 30 VDC at 40?C ? Long-term Continuously ON Contacts SPDT 3 to 24 6,000 0.3 A, 110 VDC at 40?C G5V-1 (1c) VDC Using the Relay in a circuit where the Relay will be ON 0.5 A, 125 VAC at 40?C 100,000 continuously for long periods (without switching) can lead to unstable contacts, because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. Be sure to use a fail-safe circuit design that provides protection against contact failure or coil burnout. ? Relay Handling When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40?C. Do not put the Relay in a cold cleaning bath immediately after soldering. 3 Number of contacts Isolation (dB) Number of contacts Insertion loss (dB) Return loss (dB) V.SWR

Customer Comments  

Log in or register to post comments.

Customer Reviews

No reviews yet.