E8MS10

Pressure Sensor E8MS/E8M CSM E8MS E8M DS E 3 1 Four-channel Input Controller for Control of Multiple Sensor Heads Be sure to read Safety Precautions on page 12. Ordering Information Sensors E8MS Pressure range Output configuration Model 0 to 100 kPa E8MS-01 Positive pressure 0 to 1 MPa E8MS-10 Linear output: 1 to 5 V Negative pressure 0 to 101 kPa E8MS-N0 Compound pressure 101 to 101 kPa E8MS-N1 * * Do not connect the E8MS-N1 to a Controller. A Controller is not necessary. E8M Pressure range Output configuration Model Minute pressure Differential pressure from 0 to 1,000 Pa E8M-A1-S differential between positive and negative ports Linear output: 1 to 5 V Positive pressure 0 to 1 MPa E8M-10 Negative pressure 0 to 101 kPa E8M-N0 Controllers Power supply voltage Output configuration Number of sensor inputs Models 24 VDC NPN open collector 4CH K3C-MP8 * * The E8M-MP8 cannot be connected to the E8MS-N1. 1E8MS/E8M Accessories (Order Separately) Sensor I/O Connectors Applicable model Appearance Model Specifications Unit Remarks 4-pin connector with E8M E89-M3-S * 3-m-long cable Provided with one XN2A-1430 e-CON Con- nector for Cable Connection. 3-pin connector with E8MS E89-M4-S 1 3-m-long cable 3-conductor, 3-m-long E8MS/E80-C2 E89-M4-1 cable with connectors Cannot be cut or extended. on both ends * E8M-A1 does not require the Sensor I/O Connector. e-CON Connector for Cable Connection 2 Appearance Model Applicable wire size (mm ) Quantity Minimum order unit Remarks The E89-M3 and E89-M4 are each provid- XN2A-1430 0.08 to 0.5 1 10 ed with one XN2A-1430. Power and Output Connector Model Specifications Quantity E89-M5-S 8-pin connector with 2-m cable 1 Adapter Model Remarks One Adapter is attached to Y92F-37-S the E8M-MP8 Controller. Hard Protective Front Cover 48 x 48 Panel Hole Adapter Appearance Model Appearance Model Y92A-40-S Y92F-48-S Sensor and Controller Combinations Use the Pressure Controllers in the following combinations. The E89-M3/M4 is required when using the Sensor as a single unit. Model E89-M3-S E89-M4-S E8M-MP8 E89-M5-S E89-M4-1 E8MS-01 No YesYes YesYes E8MS-10 No YesYes YesYes E8MS-N0 No YesYes YesYes E8MS-N1 * No No No No Yes E8M-A1-S No No Yes Yes No E8M-10 Yes No Yes Yes No E8M-N0 Yes No Yes Yes No Yes: Required No: Not required * Connect the E8MS-N1 to a E89-M4-S Sensor I/O Connector. Do not connect it to a Controller. A Controller is not necessary. Sensor and Controller Connection E8M-A1-S E8M-MP8 E8MS- E8M-10/N0 E89-M5-S E89-M3/M4-S 2 Sensor input Controller output