- D2SW-P Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Rubber packing construction keeps dust off and offers temporary waterproofing protection (IEC IP67). Switch rating of 2 A at 250 VAC possible with a single-leaf movable spring. Models for micro loads are also available. Solder, quick-connect terminals ( 110), PCB terminals, and molded lead wires are available. UL, CSA, VDE safety standard approved models are available upon request. RoHS Compliant Model Number Legend 1 2 3 4 D2SW-P 1. Ratings 3. Contact form 2 : 250 VAC 2 A None : SPDT 01 : 30 VDC 0.1 A -2 : SPST-NC (Molded lead wire models only) -3 : SPST-NO (Molded lead wire models only) 2. Actuator None : Pin plunger 4. Terminals L1 : Hinge lever H : Solder terminals D : Self-clinching PCB terminals L2 : Hinge roller lever L3 : Simulated roller lever T : Quick-connect terminals ( 110) M : Molded lead wires List of Models (Contact your dealer for detailed delivery date.) Ratings 2 A 0.1 A Actuator Terminals Contact Form Solder terminals D2SW-P2H D2SW-P01H Quick-connect terminals ( 110) SPDT D2SW-P2T D2SW-P01T PCB terminals D2SW-P2D D2SW-P01D Pin plunger SPDT D2SW-P2M D2SW-P01M Molded lead wires SPST-NC D2SW-P2-2M D2SW-P01-2M SPST-NO D2SW-P2-3M D2SW-P01-3M Solder terminals D2SW-P2L1H D2SW-P01L1H Quick-connect terminals ( 110) D2SW-P2L1T D2SW-P01L1T Hinge lever SPDT PCB terminals D2SW-P2L1D D2SW-P01L1D Molded lead wires D2SW-P2L1M D2SW-P01L1M Solder terminals D2SW-P2L2H D2SW-P01L2H Quick-connect terminals ( 110) D2SW-P2L2T D2SW-P01L2T Hinge roller lever SPDT PCB terminals D2SW-P2L2D D2SW-P01L2D Molded lead wires D2SW-P2L2M D2SW-P01L2M Solder terminals D2SW-P2L3H D2SW-P01L3H Quick-connect terminals ( 110) D2SW-P2L3T D2SW-P01L3T Simulated roller lever SPDT PCB terminals D2SW-P2L3D D2SW-P01L3D Molded lead wires D2SW-P2L3M D2SW-P01L3M Separator (Sold Separately), Terminal Connector (Sold Separately) Refer toMicro Switch Common Accessorie 1- D2SW-P Sealed Subminiature Basic Switch Contact Form SPDT SPST-NC (Molded lead wire models SPST-NO (Molded lead wire only) models only) The color in parentheses indicates the color of the COM NO NC COM NC COM NO lead wire. (Black) (Blue) (Red) (Black) (Red) (Black) (Blue) Contact Specifications Ratings Item Model D2SW-P2 models D2SW-P01 models Model Rated voltage Resistive load Specification Rivet Crossbar 250 VAC D2SW-P2 models 2 A Contact Material Silver Gold alloy 30 VDC Gap (Standard value) 0.5 mm 125 VAC D2SW-P01 models 0.1 A Minimum applicable load 30 VDC 160 mA at 5 VDC 1 mA at 5 VDC (reference value)* Note. The above rating values apply under the following test conditions. * Please refer toUsing Micro Load inPrecaution for more (1) Ambient temperature: 202C information on the minimum applicable load. (2) Ambient humidity: 655% (3) Operating frequency: 20 operations/min Approved Safety Standards The items shown in theList of Model are not standard approved models. Consult your OMRON sales representative for specific models with standard approvals. UL (UL1054/CSA C22.2 No.55) VDE (EN61058-1) Rated voltage Model D2SW-P2 D2SW-P01 Rated voltage Model D2SW-P2 D2SW-P01 - 0.1 A - 0.1 A 125 VAC 125 VAC 2 A - 2 A - 250 VAC 250 VAC 2 A 0.1 A 2 A 0.1 A 30 VDC 30 VDC Testing conditions: 5E4 (50,000 operations) T55 (0C to 55C) Characteristics Item Model D2SW-P2 models D2SW-P01 models Permissible operating speed 0.1 mm to 500 mm/s (for pin plunger models) Mechanical 120 operations/min Permissible operating frequency Electrical 30 operations/min Insulation resistance 100 m min. (500 VDC with insulation tester) Terminal models 50 m max. 100 m max. Contact resistance (initial value) Molded lead wire models 100 m max. 150 m max. Between terminals of the 1,000 VAC 50/60 Hz for 1 min 600 VAC 50/60 Hz for 1 min same polarity Between current-carrying 1,500 VAC 50/60 Hz for 1 min Dielectric strength *1 metal parts and ground Between each terminals and non-current-carrying 1,500 VAC 50/60 Hz for 1 min metal parts Vibration resistance *2 Malfunction 10 to 55 Hz, 1.5-mm double amplitude 2 Destruction 1,000 m/s approx. 100G max. Shock resistance 2 Malfunction *2 300 m/s approx. 30G max. Mechanical 1,000,000 operations min. (60 operations/min) Durability *3 Electrical 50,000 operations min. (20 operations/min) 200,000 operations min. (20 operations/min) Terminal models IEC IP67 (excluding the terminals on terminal models) Degree of protection Molded lead wire models IEC IP67 Degree of protection against electric shock Class I Proof tracking index (PTI) 250 Ambient operating temperature -20C to +70C (at ambient humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 85% max. (for +5 to +35C) Weight Approx. 2 g (for pin plunger models with terminals) Note. The data given above are initial values. *1. The dielectric strength shown in the table indicates values for models with a Separator. *2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. 2