Product Information

PCA9632DP1,118

PCA9632DP1,118 electronic component of NXP

Datasheet
LED Lighting Drivers 4-BIT FM+I2C-BUS

Manufacturer: NXP
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 1.426 ea
Line Total: USD 1.426

29443 - Global Stock
Ships to you between
Wed. 10 Apr to Fri. 12 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
29331 - Global Stock


Ships to you between Wed. 10 Apr to Fri. 12 Apr

MOQ : 1
Multiples : 1
1 : USD 1.426
10 : USD 1.0844
100 : USD 1.0086
250 : USD 0.9683
500 : USD 0.9085
1000 : USD 0.8349
2500 : USD 0.8153
5000 : USD 0.7981
10000 : USD 0.7797

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Mounting Style
Package / Case
Minimum Operating Temperature
Maximum Operating Temperature
Packaging
Input Voltage
Brand
Power Dissipation
Low Level Output Current
Maximum Supply Current
Factory Pack Quantity :
Supply Current - Max
Cnhts
Hts Code
Mxhts
Pd - Power Dissipation
Product Type
Subcategory
Taric
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
PCA9633D16,118 electronic component of NXP PCA9633D16,118

LED Lighting Drivers 4BIT I2C FM+ TP LED CON RST OE
Stock : 0

PCA9633DP2,118 electronic component of NXP PCA9633DP2,118

LED Lighting Drivers 4BIT I2C FM+ TP LED CON RST OE
Stock : 0

PCA9633BS,118 electronic component of NXP PCA9633BS,118

LED Lighting Drivers 4BIT I2C FM+ TP LED
Stock : 0

PCA9633PW,112 electronic component of NXP PCA9633PW,112

NXP Semiconductors LED Lighting Drivers LED DRVR 4BIT I2C
Stock : 0

PCA9632DP2,118 electronic component of NXP PCA9632DP2,118

LED Lighting Drivers 4-BIT FM+I2C-BUS
Stock : 0

PCA9633D16,112 electronic component of NXP PCA9633D16,112

LED DRVR 8Segment 2.5V/3.3V/5V 16-Pin SO Bulk
Stock : 0

PCA9633DP1,118 electronic component of NXP PCA9633DP1,118

LED Lighting Drivers LED DRVR 4BIT I2C
Stock : 12729

PCA9632DP1-T electronic component of NXP PCA9632DP1-T

LED Lighting Drivers 4-BIT FM+I2C-BUS LOW POWER LED
Stock : 0

PCA9633D16.112 electronic component of NXP PCA9633D16.112

LED Lighting Drivers LED DRVR 4BIT I2C
Stock : 0

PCA9632TK,118 electronic component of NXP PCA9632TK,118

LED Lighting Drivers 4-BIT FM+I2C-BUS
Stock : 38944

Image Description
PCA9632DP2,118 electronic component of NXP PCA9632DP2,118

LED Lighting Drivers 4-BIT FM+I2C-BUS
Stock : 0

PCA9633PW,118 electronic component of NXP PCA9633PW,118

LED Lighting Drivers 4BIT I2C FM+ TP LED CON RST OE
Stock : 0

PCA9634D,112 electronic component of NXP PCA9634D,112

LED Lighting Drivers 8BIT I2C FM+ TP LED CON RST OE
Stock : 0

PCA9635PW,118 electronic component of NXP PCA9635PW,118

LED Lighting Drivers 8BIT I2C FM+ TP LED
Stock : 1067

PCA9955TW/Q900,118 electronic component of NXP PCA9955TW/Q900,118

LED Lighting Drivers 16-channel Fm+ I2C- bus 57 mA LED driver
Stock : 12219

PCA9956BTWY electronic component of NXP PCA9956BTWY

LED Lighting Drivers I2C LED Display Control
Stock : 7835

SY89875UMG electronic component of Microchip SY89875UMG

Clock Drivers & Distribution 2.5V LVDS Output Clock Divider/Fanout (I Temp, Green)
Stock : 2

STPIC6C595MTR electronic component of STMicroelectronics STPIC6C595MTR

Driver; LED driver; 5÷100mA; 1.2÷33V; Channels:8; Uin:3÷5.5V; SO16
Stock : 5000

STP16CP05MTR electronic component of STMicroelectronics STP16CP05MTR

Driver; LED driver; 100mA; 20V; Channels:16; Uin:3÷5.5V; TSSOP24
Stock : 4000

STP04CM05XTTR electronic component of STMicroelectronics STP04CM05XTTR

LED Lighting Drivers Advanced Logic Signal Switch
Stock : 24

PCA9632 2 4-bit Fm+ I C-bus low power LED driver Rev. 6 21 September 2021 Product data sheet 1 General description 2 The PCA9632 is an I C-bus controlled 4-bit LED driver optimized for Red/Green/Blue/ Amber (RGBA) color mixing applications. The PCA9632 is a drop-in upgrade for the PCA9633 with 40 power reduction. In Individual brightness control mode, each LED output has its own 8-bit resolution (256 steps) fixed frequency Individual PWM controller that operates at 1.5625 kHz with a duty cycle that is adjustable from 0 % to 99.6 % to allow the LED to be set to a specific brightness value. In group dimming mode, each LED output has its own 6-bit resolution (64 steps) fixed frequency Individual PWM controller that operates at 6.25 kHz with a duty cycle that is adjustable from 0 % to 98.4 % to allow the LED to be set to a specific brightness value. A fifth 4-bit resolution (16 steps) Group PWM controller has a fixed frequency of 190 Hz that is used to dim all the LEDs with the same value. While operating in the Blink mode, each LED output has its own 8-bit resolution (256 steps) fixed frequency Individual PWM controller that operates at 1.5625 kHz with a duty cycle that is adjustable from 0 % to 99.6 % to allow the LED to be set to a specific brightness value. Blink rate is controlled by the Group frequency setting that has 8-bit resolution (256 steps). The blink rate is adjustable between 24 Hz and once every 10.73 seconds. For Group frequency settings between 6 Hz and 24 Hz, the Group PWM has a 6-bit resolution (64 steps) with a duty cycle that is adjustable from 0 % to 98.4 %. For Group frequency settings between 6 Hz and 0.09 Hz (once in 10.73 seconds), the Group PWM has an 8-bit resolution (256 steps) with a duty cycle that is adjustable from 0 % to 99.6 %. Each LED output can be off, on (no PWM control), set at its Individual PWM controller value or at both Individual and Group PWM controller values. The LED output driver is programmed to be either open-drain with a 25 mA current sink capability at 5 V or totem pole with a 25 mA sink, 10 mA source capability at 5 V. The PCA9632 operates with a supply voltage range of 2.3 V to 5.5 V and the outputs are 5.5 V tolerant. LEDs can be directly connected to the LED output (up to 25 mA, 5.5 V) or controlled with external drivers and a minimum amount of discrete components for larger current or higher voltage LEDs. The PCA9632 is in the new Fast-mode Plus (Fm+) family. Fm+ devices offer higher frequency (up to 1 MHz) and more densely populated bus operation (up to 4000 pF). 2 Software programmable LED Group and three Sub Call I C-bus addresses allow all or 2 defined groups of PCA9632 devices to respond to a common I C-bus address, allowing, for example, all red LEDs to be turned on or off at the same time or marquee chasing 2 effect, thus minimizing I C-bus commands. The Software Reset (SWRST) Call allows the controller to perform a reset of the 2 PCA9632 through the I C-bus, identical to the Power-On Reset (POR) that initializes the registers to their default state causing the outputs to be set high-impedance. This allows an easy and quick way to reconfigure all device registers to the same condition.NXP Semiconductors PCA9632 2 4-bit Fm+ I C-bus low power LED driver 2 Features and benefits 40 power reduction compared to PCA9633 4 LED drivers. Each output programmable at: Off On Programmable LED brightness Programmable group dimming/blinking mixed with individual LED brightness 2 1 MHz Fast-mode Plus I C-bus interface with 30 mA high drive capability on SDA output for driving high capacitive buses 256-step (8-bit) linear programmable brightness per LED output varying from fully off (default) to maximum brightness using a 1.5625 kHz PWM signal in Individual brightness mode 64-step (6-bit) linear programmable brightness for each LED output varying from fully off (default) to maximum brightness using a 6.25 kHz PWM signal in group dimming mode In group dimming mode, 16-step group brightness control allows global dimming (using a 190 Hz PWM signal) from fully off to maximum brightness (default) 256-step (8-bit) linear programmable brightness per LED output varying from fully off (default) to maximum brightness using a 1.5625 kHz PWM signal in group blinking mode 64-step group blinking with frequency programmable from 24 Hz to 6 Hz and duty cycle from 0 % to 98.4 % 256-step group blinking with frequency programmable from 6 Hz to 0.09 Hz (10.73 s) and duty cycle from 0 % to 99.6 % Four totem pole outputs (sink 25 mA and source 10 mA at 5 V) with software programmable open-drain LED outputs selection (default at high-impedance). No input function. 10-pin package option provides two hardware address pins allowing four devices to operate on the same bus Output state change programmable on the Acknowledge or the STOP Command to update outputs byte-by-byte or all at the same time (default to Change on STOP). 2 Software Reset feature (SWRST Call) allows the device to be reset through the I C-bus 400 kHz internal oscillator requires no external components Internal power-on reset Noise filter on SDA/SCL inputs Edge rate control on outputs No glitch on power-up Supports hot insertion Low standby current of < 1 A Operating power supply voltage range of 2.3 V to 5.5 V 5.5 V tolerant inputs -40 C to +85 C operation ESD protection exceeds 5000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101 Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA Packages offered: TSSOP8, TSSOP10, HVSON8 PCA9632 All information provided in this document is subject to legal disclaimers. NXP B.V. 2021. All rights reserved. Product data sheet Rev. 6 21 September 2021 2 / 37

Tariff Desc

8542.39.23 No ..Linear/analogue and peripheral integrated circuits, timers, voltage regulators, A/D and D/A converters, telecommunication and modem integrated circuits, other than board level products Free

Electronic integrated circuits- Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits
FR9
Freescale
FREESCALE SEMI
Freescale Semicon
FREESCALE SEMICONDUC
Freescale Semiconductor
Freescale Semiconductor - NXP
NXP
NXP Freescale
NXP (FREESCALE)
NXP / Freescale
NXP SEMI
NXP Semicon
NXP SEMICONDUCTOR
NXP Semiconductors
NXP USA Inc.
PH3
PHI

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted