Product Information

NDTS2412C

NDTS2412C electronic component of Murata

Datasheet
Module DC-DC 24VIN 1-OUT 12V 0.25A 3W 8-Pin DIP Tube

Manufacturer: Murata
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 19.527 ea
Line Total: USD 19.527

13 - Global Stock
Ships to you between
Wed. 10 Apr to Fri. 12 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
13 - Global Stock


Ships to you between Wed. 10 Apr to Fri. 12 Apr

MOQ : 1
Multiples : 1

Stock Image

NDTS2412C
Murata

1 : USD 19.527
5 : USD 19.435
10 : USD 19.067
30 : USD 18.6185
60 : USD 17.664
105 : USD 16.5485

     
Manufacturer
Product Category
Category
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
NDTS4815C electronic component of Murata NDTS4815C

Isolated DC/DC Converters 3W 48V to 15V
Stock : 0

NDY0515C electronic component of Murata NDY0515C

Isolated DC/DC Converters 3W 5V to 15W 200mA Single Output
Stock : 0

NDTS2415C electronic component of Murata NDTS2415C

Isolated DC/DC Converters 3W 24V to 15V
Stock : 0

NDTS4812C electronic component of Murata NDTS4812C

Isolated DC/DC Converters 3W 48V to 12V
Stock : 0

NDY0512C electronic component of Murata NDY0512C

Isolated DC/DC Converters 3W 4.5-9VIN 12V OUT Single Output
Stock : 0

NDTS4803C electronic component of Murata NDTS4803C

Isolated DC/DC Converters 3W 48V to 3.3V
Stock : 0

NDTS4805C electronic component of Murata NDTS4805C

Isolated DC/DC Converters 3W 48V to 5V
Stock : 0

NDY0505C electronic component of Murata NDY0505C

Isolated DC/DC Converters 3W 4.5-9VIN 5V OUT Single Output
Stock : 10

NDY0509C electronic component of Murata NDY0509C

Isolated DC/DC Converters 3W 4.5-9VIN 9V OUT Single Output
Stock : 0

NDY1205C electronic component of Murata NDY1205C

Isolated DC/DC Converters 3W 9-18VIN 5V OUT Single Output
Stock : 63

Image Description
UC2845BD1013TR electronic component of STMicroelectronics UC2845BD1013TR

Switching Controllers 0.5mA Current Mode
Stock : 4915

NDTS4803C electronic component of Murata NDTS4803C

Isolated DC/DC Converters 3W 48V to 3.3V
Stock : 0

NDTS4805C electronic component of Murata NDTS4805C

Isolated DC/DC Converters 3W 48V to 5V
Stock : 0

NDY0505C electronic component of Murata NDY0505C

Isolated DC/DC Converters 3W 4.5-9VIN 5V OUT Single Output
Stock : 10

NDY0509C electronic component of Murata NDY0509C

Isolated DC/DC Converters 3W 4.5-9VIN 9V OUT Single Output
Stock : 0

NDY1205C electronic component of Murata NDY1205C

Isolated DC/DC Converters 3W 9-18VIN 5V OUT Single Output
Stock : 63

NDY1209C electronic component of Murata NDY1209C

Isolated DC/DC Converters 3W 9-18VIN 9V OUT Single Output
Stock : 12

NDY1215C electronic component of Murata NDY1215C

Isolated DC/DC Converters 3W 9-18VIN 15V OUT Single Output
Stock : 42

NDY2409C electronic component of Murata NDY2409C

Isolated DC/DC Converters 3W 18-36VIN 9V OUT Single Output
Stock : 0

UC3525ADWTR electronic component of Texas Instruments UC3525ADWTR

Switching Controllers Regulating Pulse Width Modulator
Stock : 1130

NDTS Series www.murata-ps.com Isolated 3W Single Output DC-DC Converters SELECTION GUIDE Output current 2 MTTF Min. Order code Full load 1 Load V (Nom.) V mA mA mA % pF kHrs NDTS0503C 5 3.3 227 909 898 63 28 1658 NDTS0505C 5 5 150 600 806 71 30 1665 NDTS0512C 5 12 63 250 769 76 32 1650 NDTS1212C 12 12 63 250 310 75 35 1650 NDTS2403C 24 3.3 227 909 172 71 32 1671 FEATURES NDTS2405C 24 5 150 600 156 78 32 1673 Industry standard footprint NDTS2412C 24 12 63 250 149 80 35 1650 Recommended Single isolated output Alternative NDTS0515C 5 15 50 200 757 77 33 1633 NDY0515C Short circuit protection NDTS1203C 12 3.3 227 909 350 71 29 1668 NCS3S1203SC Operating temperature range 40C to NDTS1205C 12 5 150 600 320 73 32 1665 NDY1205C +85C NDTS1215C 12 15 50 200 310 76 32 1633 NDY1215C NDTS2415C 24 15 50 200 147 84 35 1617 NDY2415C Low prole 24 pin case NDTS4803C 48 3.3 227 909 87 71 32 1676 NCS3S4803SC 2:1 Wide input range NDTS4805C 48 5 150 600 83 75 32 1668 NDY4805C NDTS4812C 48 12 63 250 76 80 40 1631 NCS3S4812SC 1kVDC Isolation Hi Pot Test NDTS4815C 48 15 50 200 75 80 40 1600 NCS3S4815SC 5V, 12V & 24V Input INPUT CHARACTERISTICS 3.3V, 5V & 12V Output Parameter Conditions Min. Typ. Max. Units Internal SMD construction All NDTS05 types 4.5 5 9 Voltage range All NDTS12 types 9 12 18 V Fully encapsulated All NDTS24 types 18 24 36 All NDTS05 types 50 150 DESCRIPTION 1 Reected ripple current All NDTS12 types 30 100 mA p-p The NDTS series is a range of low prole DC-DC All NDTS24 types 40 50 converters offering a single regulated output over a 2:1 input voltage range. All parts deliver 3W OUTPUT CHARACTERISTICS output power up to 85C without heatsinking. A yback oscillator design with isolated feedback Parameter Conditions Min. Typ. Max. Units is used to give regulation over the full operating Voltage set point accuracy With external input/output capacitors 1 3 % range of 25% to 100% of full load. It is strongly Low line to high line with external input/ Line regulation 0.15 0.5 % recommended that external capacitors be used output capacitors on input and output to guarantee performance over full load and input voltage range (see 0503, 0505 0.8 1.0 recommended lter circuit for values). Minimum load to rated Load regulation load with external input/ 2403, 2405 0.8 1.2 % output capacitors 12V outputs 0.1 0.5 BW = 20Hz to 300kHz with external input/ Ripple 15 40 mV rms output capacitors Ripple & noise BW = DC to 20MHz with external input/output 90 150 mV p-p capacitors 1. Please refer to relected ripple current measurement circuit on page 2. 2. Calculated using MIL-HDBK-217F with nominal input voltage at full load (ground benign) at 25C. All specications typical at TA=25C, nominal input voltage and rated output current unless otherwise specied. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KDC NDTS.F01 Page 1 of 5 Input voltage Rated output voltage Input current full load Efciency (Min.) Isolation capacitanceNDTS Series Isolated 3W Single Output DC-DC Converters ABSOLUTE MAXIMUM RATINGS Short-circuit protection 8 Hours Lead temperature 1.5mm from case for 10 seconds 300C 1 Minimum output load for specication 25% of rated output Input voltage 05 types 10V Input voltage 12 types 20V Input voltage 24 types 40V Free air space 10mm Min. around component GENERAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Switching frequency 100% to 25% load, VIN Min. to Max. 70 650 kHz ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Isolation voltage Flash tested for 1 second 1000 VDC Resistance Resistance 1 G TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Operation -40 85 Storage -50 125 NDTS1212C, NDTS2405C, NDTS2412C 30 C Case temperature rise above ambient in still air NDTS0505C, NDTS0512C, NDTS2403C 40 NDTS0503C 50 TECHNICAL NOTES ISOLATION VOLTAGE Hi Pot Test, Flash Tested, Withstand Voltage, Proof Voltage, Dielectric Withstand Voltage & Isolation Test Voltage are all terms that relate to the same thing, a test voltage, applied for a specied time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions NDTS series of DC-DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 second. A question commonly asked is, What is the continuous voltage that can be applied across the part in normal operation For a part holding no specic agency approvals, such as the NDTS series, both input and output should normally be maintained within SELV limits i.e. less than 42.4V peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system. The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier but then the circuitry on both sides of the barrier must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according to safety standard requirements. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. The NDTS series has an EI ferrite core, with no additional insulation between primary and secondary windings of enameled wire. While parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specied test voltage. This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further insulation system of physical spacing or barriers. RoHS COMPLIANCE INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300C for 10 seconds. The pin termination nish on this product series is Tin. The series is backward compatible with Sn/Pb soldering systems. For further information, please visit www.murata-ps.com/rohs 1. Please refer to minimum load application note on page 4. www.murata-ps.com/support KDC NDTS.F01 Page 2 of 5

Tariff Desc

8504.40.90 POWER SUPPLIES, having BOTH:
(a) input voltages of 176V-246VAC, 47Hz-63Hz single phase OR 200V-230VAC, 50Hz-60Hz single phase
(b) multiple DC output voltages from minus 200 V to positive 200V
TC 9603032

8504.40.90 CHARGERS, ADAPTERS AND INVERTERS, AC/DC OR DC/DC OR DC/AC having ALL of the following:
(a) input voltage NOT less than 10V and NOT greater than 252V
(b) output voltage NOT less than 2V and NOT greater than 252V
(c) wattage NOT less than 40 W and NOT greater than 160W
(d) output current NOT greater than 17A - TC 1021920

8504.50.10 81
(a) designed for use with equipment of 8471
(b) for telecommunication apparatus of 8517 Free

8504.40.90 POWER SUPPLY UNITS, DC AND/OR AC output, complying with AS/NZS 60950 & AS/NZS CISPR 22, having ALL of:
(a) voltage NOT less than 2.5 V and NOT greater than 55V
(b) wattage NOT less than 0.02 W and NOT greater than 105W
(c) current output NOT less than 0.01 amp and NOT greater than 2.5amp
TC 1014564

8504.40.90 POWER SUPPLY MODULES having ALL of the following:
(a) input power at EITHER of the following voltages:
(i) 120VAC/240VAC
(ii) 24VDC /48VDC
(b) output power at EITHER of the following voltages:
(i) 5VDC, +15VDC, -15VDC, and 24VDC field I/O
(ii) 24VDC field I/O only
(c) circuitry monitors
(d) output adjusters
TC 9810001

8504.40.90 POWER SUPPLIES DC having BOTH:
(a) variable voltage NOT exceeding 30V
(b) maximum current output NOT exceeding 25amps
TC 9900597

8504.40.90 CONVERTERS, DC/DC, power output not exceeding 5W, being ANY of:
(a) single in line package
(b) dual in line
(c) surface mount device
TC 9601650

8543.90.20 20 Electronic microassemblies Free

8504.40.30 Static converters
(a) separately housed units, designed to be housed in the same cabinet as the central processing unit of equipment of 8471
(b) for telecommunication apparatus of 8517
60 No Electric current rectifying assemblies Free
63 No Other Free
IPDiA
MU2
MUP
MUR
MURATA
Murata - TOKO
Murata / IPDiA
Murata Electronics
Murata Electronics N
Murata Electronics North America
MURATA MANUFACTURING
Murata Manufacturing Co.
Murata Power Solutio
Murata Power Solutions
Murata Power Solutions Inc
Murata Power Solutions Inc.
Toko
TOKO AMERICA
Toko America Inc.
TOKO, Inc.
TOKYO PARTS INDUSTRIAL
Tokyo Parts Industrial Group

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted