Product Information

MEE3S1205SC

MEE3S1205SC electronic component of Murata

Datasheet
Module DC-DC 12VIN 1-OUT 5V 0.6A 3W 4-Pin SIP Tube

Manufacturer: Murata
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 11.9725 ea
Line Total: USD 11.9725

1 - Global Stock
Ships to you between
Fri. 05 Apr to Thu. 11 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
1 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

MEE3S1205SC
Murata

1 : USD 11.9725
5 : USD 11.4325
10 : USD 10.89
25 : USD 10.6813
35 : USD 10.4676

     
Manufacturer
Product Category
Isolation Voltage
Brand
No. Of Outputs
Output Power Max
Output Voltage - Output 1
Output Current - Output 1
Product Range
Input Voltage Dc Min
Input Voltage Dc Max
Dc / Dc Converter Output Type
Dc / Dc Converter Type
Dc / Dc Converter Mounting
Width
Height
Depth
Svhc
Approval Bodies
Approvals Standards
Power Rating
Supply Voltage
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
MEF1S0503SPC electronic component of Murata MEF1S0503SPC

Module DC-DC 5VIN 1-OUT 3.3V 0.303A 1W 4-Pin SIP Module
Stock : 15

MEF1S0305SP3C electronic component of Murata MEF1S0305SP3C

Isolated DC/DC Converters 1W 3.3Vin 5Vout 200mA Iso
Stock : 0

MEF1S0303SPC electronic component of Murata MEF1S0303SPC

Module DC-DC 3.3VIN 1-OUT 3.3V 0.303A 1W 4-Pin SIP Module
Stock : 0

MEE3S1215SC electronic component of Murata MEE3S1215SC

Module DC-DC 12VIN 1-OUT 15V 0.2A 3W 4-Pin SIP Tube
Stock : 6

MEE3S1212SC electronic component of Murata MEE3S1212SC

Murata Power Solutions Isolated DCDC Converters 3W 12Vin 12Vout 250mA Iso SIP
Stock : 12

MEE3S1209SC electronic component of Murata MEE3S1209SC

Module DC-DC 12VIN 1-OUT 9V 0.333A 3W 4-Pin SIP Tube
Stock : 0

MEF1S0505SP3C electronic component of Murata MEF1S0505SP3C

Isolated Module DC DC Converter 1 Output 5V 200mA 4.75V - 5.25V Input
Stock : 1036

MEF1S0503SP3C electronic component of Murata MEF1S0503SP3C

Isolated Module DC DC Converter 1 Output 3.3V 303mA 4.75V - 5.25V Input
Stock : 0

MEF1S0305SPC electronic component of Murata MEF1S0305SPC

Isolated Module DC DC Converter 1 Output 5V 200mA 3.135V - 3.465V Input
Stock : 14

MEF1S0303SP3C electronic component of Murata MEF1S0303SP3C

Isolated Module DC DC Converter 1 Output 3.3V 303mA 3.135V - 3.465V Input
Stock : 0

Image Description
MEE3S0509SC electronic component of Murata MEE3S0509SC

Isolated DC/DC Converters 3W 5Vin 9Vout 333mA Iso SIP
Stock : 32

MEE1S2415DC electronic component of Murata MEE1S2415DC

Isolated DC/DC Converters 1W 24Vin 15Vout 67mA DIP
Stock : 0

MEE1S2412DC electronic component of Murata MEE1S2412DC

Isolated DC/DC Converters 1W 24Vin 12Vout 83mA DIP
Stock : 0

MEE1S2409DC electronic component of Murata MEE1S2409DC

Isolated DC/DC Converters 1W 24Vin 9Vout 111mA DIP
Stock : 0

MEE1S2405SC electronic component of Murata MEE1S2405SC

Module DC-DC 24VIN 1-OUT 5V 0.2A 1W 4-Pin SIP
Stock : 1

MEE1S2405DC electronic component of Murata MEE1S2405DC

Murata Power Solutions Isolated DCDC Converters 1W 24Vin 5Vout 200mA DIP
Stock : 0

MEE1S1515SC electronic component of Murata MEE1S1515SC

Module DC-DC 15VIN 1-OUT 15V 0.067A 1W 4-Pin SIP
Stock : 0

MEE1S1512SC electronic component of Murata MEE1S1512SC

Module DC-DC 15VIN 1-OUT 12V 0.083A 1W 4-Pin SIP
Stock : 0

MEE1S1509SC electronic component of Murata MEE1S1509SC

Module DC-DC 15VIN 1-OUT 9V 0.111A 1W 4-Pin SIP
Stock : 60

MEE1S1509DC electronic component of Murata MEE1S1509DC

Module DC-DC 15VIN 1-OUT 9V 0.111A 1W 4-Pin DIP
Stock : 0

MEE3 Series www.murata-ps.com 1kVDC Isolated 3W Single Output DC/DC Converters SELECTION GUIDE Order Code V V mA mA % mVp-p % % pF MHrs MEE3S0505SC 5 5 600 703 6.3 8 46 70 80 83 32 3.9 MEE3S0509SC 5 9 333 677 5.2 6.5 28 45 84 87 50 2.9 MEE3S0512SC 5 12 250 691 4.7 6 26 45 83 86 41 4.2 MEE3S0515SC 5 15 200 679 4.7 6.5 24 45 85 88 51 2.5 FEATURES MEE3S1205SC 12 5 600 290 4.3 6 41 60 82 85 42 3.6 n UL 60950 recognized MEE3S1209SC 12 9 333 280 3.5 5 21 40 84 88 66 3.7 n RoHS compliant MEE3S1212SC 12 12 250 280 3 4.5 19 40 84 88 77 3.4 MEE3S1215SC 12 15 200 277 2.7 4 21 40 85 89 91 3.4 n Typical efficiency from 83% 3 n Power density 2.68W/cm INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units n Wide temperature performance at full Continuous operation, 5V input types 4.5 5 5.5 3 3 Watt load, 40C to 85C Voltage range V Continuous operation, 12V input types 10.8 12 13.2 n UL 94V-0 package material 5V input types 5 15 Reflected ripple current mA p-p 12V input types 5 15 n No heatsink required n Industry standard pinout OUTPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units n 5V & 12V input Rated Power 3 W TA=-40C to 85C n 5V, 9V, 12V, & 15V output Voltage Set Point Accuracy See tolerance envelope Line regulation High VIN to low VIN 1.01 1.1 %/% n Fully encapsulated with toroidal magnetics ISOLATION CHARACTERISTICS n No external components required Parameter Conditions Min. Typ. Max. Units Isolation test voltage Flash tested for 1 second 1000 VDC n No electrolytic or tantalum capacitors Resistance Viso= 1000VDC 10 G PRODUCT OVERVIEW GENERAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units The MEE3 series is a new range of high Switching frequency 60 kHz performance 3W DC/DC converters, offering 3W of available output power in a previously rated 2W package capable of operation over the full TEMPERATURE CHARACTERISTICS 3 Parameter Conditions Min. Typ. Max. Units industrial temperature range of -40C to 85C . Specification All output types -40 85 Available in an industry standard SIP package, with a pin compatible power upgrade path from Storage -50 125 the 1W NME/NKE and 2W NML series, they are MEE3Sxx05SC, MEE3S0512C 40 C Case Temperature rise ideally suited for providing local supplies on MEE3S0515C, MEE3S1209C, MEE3S1212C 35 above ambient control system boards with the added benefit of MEE3S1215C, MEE3S0509C 30 1kVDC galvanic isolation. Cooling Free air convection ABSOLUTE MAXIMUM RATINGS Lead temperature 1mm from case for 10 seconds 260C Input voltage VIN, MEE3S05 types 7V Input voltage VIN, MEE3S12 types 15V 1. See Ripple & Noise characterisation method. 2. Calculated using MIL-HDBK-217F FN2 with nominal input voltage at full load. 3. See safety approval section on page 2. All specifications typical at T A=25C, nominal input voltage and rated output current unless otherwise specified. For full details go to www.murata-ps.com/rohs www.murata-ps.com All enquiries: www.murata-ps.com/support KDC MEE3C.A01 Page 1 of 5 Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise 1 (Typ) Ripple & Noise 1 (Max) Efficiency (Min.) Efficiency (Typ.) Isolation Capacitance 2 MTTFTypical Load Line Typical Load Line MEE3 Series 1kVDC Isolated 3W Single Output DC/DC Converters TEMPERATURE DERATING GRAPH OUTPUT VOLTAGE TOLERANCE ENVELOPE 5% 5% 4.5 2% 1% 85C VNOM VNOM 0% 0% 3.0 -3% 1.5 Safe Operating Area -4% 50 75 100 50 75 100 10 25 10 25 Output Load Current (%) Output Load Current (%) 0 -40 0 50 100 150 Ambient Temperature (C) The voltage tolerance envelope shows typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage varia- tion due to changes in output loading. TECHNICAL NOTES ISOLATION VOLTAGE Hi Pot Test, Flash Tested, Withstand Voltage, Proof Voltage, Dielectric Withstand Voltage & Isolation Test Voltage are all terms that relate to the same thing, a test voltage, applied for a specified time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions MEE3 series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 second. A question commonly asked is, What is the continuous voltage that can be applied across the part in normal operation The MEE3 series has been recognized by Underwriters Laboratory for functional isolation. Both input and output should normally be maintained within SELV limits i.e. less than 42.4V peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation sys- tem. The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier but then the circuitry on both sides of the barrier must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according to safety standard requirements. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. The MEE3 series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specified test voltage. This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further insulation system of physical spacing or barriers. RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 260C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. They are backward compatible with Sn/Pb soldering systems. For further information, please visit www.murata-ps.com/rohs SAFETY APPROVAL The MEE3 series has been recognized by Underwriters Laboratory (UL) to UL 60950 for functional isolation in a maximum still air ambient temperature of 63C and/or case tempera- ture limit of 91C. Case temperature measured on the face opposite the pins. File number E179522 applies. The MEE3 series of converters are not internally fused so to meet the requirement of UL 60950, an input line fuse should always be used. An anti-surge 2.5A should be used for MEE3S05xxSC models, and an anti-surge 1A should be used for MEE3S12xxSC models. All fuses should be UL approved and rated to at least the maximum allowable DC input voltage. www.murata-ps.com All enquiries: www.murata-ps.com/support KDC MEE3C.A01 Page 2 of 5 Output Power (W) Output Voltage Output Voltage

Tariff Desc

8504.40.90 POWER SUPPLIES, having BOTH:
(a) input voltages of 176V-246VAC, 47Hz-63Hz single phase OR 200V-230VAC, 50Hz-60Hz single phase
(b) multiple DC output voltages from minus 200 V to positive 200V
TC 9603032

8504.40.90 CHARGERS, ADAPTERS AND INVERTERS, AC/DC OR DC/DC OR DC/AC having ALL of the following:
(a) input voltage NOT less than 10V and NOT greater than 252V
(b) output voltage NOT less than 2V and NOT greater than 252V
(c) wattage NOT less than 40 W and NOT greater than 160W
(d) output current NOT greater than 17A - TC 1021920

8504.50.10 81
(a) designed for use with equipment of 8471
(b) for telecommunication apparatus of 8517 Free

8504.40.90 POWER SUPPLY UNITS, DC AND/OR AC output, complying with AS/NZS 60950 & AS/NZS CISPR 22, having ALL of:
(a) voltage NOT less than 2.5 V and NOT greater than 55V
(b) wattage NOT less than 0.02 W and NOT greater than 105W
(c) current output NOT less than 0.01 amp and NOT greater than 2.5amp
TC 1014564

8504.40.90 POWER SUPPLY MODULES having ALL of the following:
(a) input power at EITHER of the following voltages:
(i) 120VAC/240VAC
(ii) 24VDC /48VDC
(b) output power at EITHER of the following voltages:
(i) 5VDC, +15VDC, -15VDC, and 24VDC field I/O
(ii) 24VDC field I/O only
(c) circuitry monitors
(d) output adjusters
TC 9810001

8504.40.90 POWER SUPPLIES DC having BOTH:
(a) variable voltage NOT exceeding 30V
(b) maximum current output NOT exceeding 25amps
TC 9900597

8504.40.90 CONVERTERS, DC/DC, power output not exceeding 5W, being ANY of:
(a) single in line package
(b) dual in line
(c) surface mount device
TC 9601650

8543.90.20 20 Electronic microassemblies Free

8504.40.30 Static converters
(a) separately housed units, designed to be housed in the same cabinet as the central processing unit of equipment of 8471
(b) for telecommunication apparatus of 8517
60 No Electric current rectifying assemblies Free
63 No Other Free
IPDiA
MU2
MUP
MUR
MURATA
Murata - TOKO
Murata / IPDiA
Murata Electronics
Murata Electronics N
Murata Electronics North America
MURATA MANUFACTURING
Murata Manufacturing Co.
Murata Power Solutio
Murata Power Solutions
Murata Power Solutions Inc
Murata Power Solutions Inc.
Toko
TOKO AMERICA
Toko America Inc.
TOKO, Inc.
TOKYO PARTS INDUSTRIAL
Tokyo Parts Industrial Group

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted