D1U86G-W-460-12-HxxDC Series www.murata-ps.com 86mm 1U Front End AC-DC Power Supply Converter PRODUCT OVERVIEW The D1U86G-W-460-12-HxxDC is a bulk front end power supply which meets the needs of systems requiring high ef ciency distributed power architectures. The output power of this supply is rated at 460W with one main and one standby output. The supply provides 80 PLUS gold ef ciency, hot plug capability, and parallel operation with droop current sharing. Closed-loop internal fan cooling provides reliable long life operation. Industry standard PMBus communication protocol makes system integration with this supply seamless and straightforward. The low-pro le design and dense packaging makes this supply ideal for delivering reliable, ef cient power to servers, workstations, storage devices and other distributed power systems. ORDERING GUIDE Part Number Power Output Main Output Standby Output Air ow FEATURES 460W output power D1U86G-W-460-12-HB4DC 460W 12V 12V Back to front 80 PLUS Gold ef ciency D1U86G-W-460-12-HB3DC 460W 12V 12V Front to back 12V main output INPUT CHARACTERISTICS 12V standby output of 30W Parameter Conditions Min. Nom. Max. Units Input Voltage Operating Range 90 115/230 264 Vac 1U height: 3.4 x 7.75 x 1.57 Frequency 47 50/60 63 Hz 11.1 Watts per cubic inch density Turn-on Voltage Ramp up 81 85 89 Vac Turn-off Voltage Ramp down 70.5 74.3 78 N+1 redundancy capable, Maximum Input Current (100Vac) 460W 5.5 Arms including hot plugging (up to 8 in parallel) Inrush Current At 264Vac at 25C cold start 30 Apk Droop current sharing on 12V main output, Power Factor At 230Vac, full load 0.99 ORing FET 20% load 88 Ef ciency (230Vac) excluding fan load % 50% load 92 Overvoltage, overcurrent, 100% load 88 overtemperature protection Internal cooling fan (variable speed) OUTPUT VOLTAGE CHARACTERISTICS Output PMBus / IC interface with status indicators Parameter Conditions Min. Typ. Max. Units Voltage RoHS compliant Voltage Set Point 1A load 12.27 12.3 12.33 Vdc Static Regulation 11.85 12.45 1 Ripple Voltage & Noise 20MHz Bandwidth 120 mV p-p 12V Droop Regulation 0.27 0.3 0.33 V Output Current 0 38.3 A Load Capacitance 22,000 F Voltage Set Point 11.97 12.0 12.03 Vdc Line and Load Regulation 11.4 12.6 1 12VSB Ripple Voltage & Noise 20MHz Bandwidth 120 mV p-p Output Current 0 2.5 A Load Capacitance 1000 F 1 Ripple and noise are measured with 0.1 F of ceramic capacitance and 10 F of tantalum capacitance on each of the power supply outputs. A short coaxial cable with 50 scope termination is used. www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html Available now at www.murata-ps.com/en/3d/acdc.html CB For full details go to Test Certi cate www.murata-ps.com/rohs and Test Report PENDING PENDING www.murata-ps.com/support D1U86G-W-460-12-HxxDC.A02 Page 1 of 5D1U86G-W-460-12-HxxDC Series 86mm 1U Front End AC-DC Power Supply Converter OUTPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Output Rise Monotonicity No voltage excursion Startup Time AC ramp up 1.5 s 12V, 50% load step, 0.5A/s di/dt 300 Transient Response mV 12VSB, 50% load step, 0.5A/s di/dt 600 Current sharing accuracy (up to 8 in parallel) At 100% load 10 % Hot Swap Transients All outputs remain in regulation 5 % Holdup Time 10 ms ENVIRONMENTAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Storage Temperature Range -40 70 C Operating Temperature Range 050 Operating Humidity Noncondensing 5 90 % Storage Humidity 595 Altitude (without derating at 40C) 3000 m Shock 30G non operating Operational Vibration 1G, 10 500 Hz, 1.6G (non-operational) MTBF Per Telcordia SR-322 M1C1 40C 635K hrs Acoustic 55 dB A/ 1m CSA/UL 60950-1-07-2nd Ed. IEC 60950-1:2005 (2nd Edition) w Am. 1:2009 Safety Approvals (pending) EN 60950-1:2006 +A11:2009 +A1:2010 CE Marking per LVD DIRECTIVE 2006/95/EC Input Fuse Power Supply has internal 6.3A/250V fast blow fuse on the AC line input Weight 1.76 lbs (798g) PROTECTION CHARACTERISTICS Output Parameter Conditions Min. Typ. Max. Units Voltage Overtemperature (intake) Autorestart 57 60 63 C Overvoltage Latching 13.6 15 V 12V Overcurrent Latching 42 49.8 A Overvoltage Autorecovery 13.6 15 V 12VSB Overcurrent Autorecovery 3.5 5.0 A ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Input to Output - Reinforced 3000 Vrms Insulation Safety Rating / Test Voltage Input to Chassis - Basic 1500 Vrms Isolation Main and standby outputs connected directly to chassis EMISSIONS AND IMMUNITY Characteristic Standard Compliance IEC/EN 61000-3-2 Complies Input Current Harmonics Voltage Fluctuation and Flicker IEC/EN 61000-3-3 Complies Conducted Emissions FCC 47 CFR Part 15/CISPR 22/EN55022 Class B, 6dB margin ESD Immunity IEC/EN 61000-4-2 Level 3 criteria A Radiated Field Immunity IEC/EN 61000-4-3 Level 3 criteria B Electrical Fast Transient Immunity IEC/EN 61000-4-4 Level 3 criteria A Surge Immunity IEC/EN 61000-4-5 Level 3 criteria A Radiated Field Conducted Immunity IEC/EN 61000-4-6 Level 3 criteria A Magnetic Field Immunity IEC/EN 61000-4-8 3 A/m criteria B 230Vin, 100% load, Phase 0, Dip 100% Duration 10ms (A) Voltage dips, interruptions IEC/EN 61000-4-11 230Vin, 50% load, Phase 0, Dip 100% Duration 20ms (VSB:A, V1:A) 230Vin, 100% load, Phase 0, Dip 100% Duration > 20ms (VSB, V1:B) www.murata-ps.com/support D1U86G-W-460-12-HxxDC.A02 Page 2 of 5