MiniSense 100 Vibration Sensor High Sensitivity Good Frequency Response Excellent Linearity Shielded Construction Analog Output Withstands High Shock The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The pins are designed for easy installation and are solderable. Horizontal and vertical mounting options are offered as well as a reduced height version. The active sensor area is shielded Dimensions (in millimeters) for improved RFI/EMI rejection. Rugged, flexible PVDF sensing element withstands high shock overload. Sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. The mass may be modified to obtain alternative frequency response and sensitivity selection (consult factory). APPLICATIONS Washing Machine Load Imbalance Vehicle Motion Sensor Anti-Theft Devices Vital Signs Monitoring Tamper Detection Impact Sensing FEATURES High Voltage Sensitivity (1 V/g) Over 5 V/g at Resonance Horizontal or Vertical Mounting Shielded Construction Solderable Pins, PCB Mounting Low Cost < 1% Linearity Up to 40 Hz (2,400 rpm) Operation Below Resonance MiniSense 100 Vibration Sensor Rev 1 www.meas-spec.com 11/03/2008 1 of 4 MiniSense 100 Vibration Sensor performance specifications Typical properties/specifications Typical Properties (at 25 C) Parameter Value Units 1.1 V/g Voltage Sensitivity (open-circuit, baseline) 260 pC/g Charge Sensitivity (baseline) 75 Hz Resonance Frequency 6 V/g Voltage Sensitivity (open-circuit, at resonance) 42 Hz Upper Limiting Frequency (+3 dB) Linearity +/-1 % Capacitance 244 pF Dissipation Factor 0.018 (none) 0.3 gram Inertial Mass Environmental Specifications Storage Temperature -40 to +80 deg C Operating Temperature -20 to +60 deg C Minisense 100H 0.5 gram Weight Minisense 100V 0.6 gram MiniSense 100 Vibration Sensor Rev 1 www.meas-spec.com 11/03/2008 2 of 4