APBDA3020SURKCGKC-GX

APBDA3020SURKCGKC-GX 3.0 x 2.0 mm Right Angle SMD LED DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.0 x 2.8 x 2.0 mm right angle SMD LED, 2.0 mm thickness Low power consumption Ideal for backlight and indicator Package: 2000 pcs / reel The maximum shear tolerance of the epoxy lens is 300g Moisture sensitivity level: 3 Halogen-free Tinned pads for improved solderability RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Notes: 1. All dimensions are in millimeters (inches). Observe precautions for handling 2. Tolerance is 0.2(0.008 ) unless otherwise noted. electrostatic discharge sensitive devices 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 500 900 Hyper Red (AlGaInP) *120 *300 APBDA3020SURKCGKC-GX Water Clear 15 120 300 Green (AlGaInP) *120 *300 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAL0182 / 1203012005 Rev No: V.12A Date: 01/26/2021 APBDA3020SURKCGKC-GX ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 645 Wavelength at Peak Emission I = 20mA - nm F peak Green 574 Hyper Red 630 1 Dominant Wavelength I = 20mA - nm F dom Green 570 Spectral Bandwidth at 50% REL MAX Hyper Red 28 - nm I = 20mA Green 20 F Hyper Red 35 Capacitance C - pF Green 15 Hyper Red 1.95 2.5 2 Forward Voltage I = 20mA V V F F Green 2.1 2.5 Hyper Red 10 Reverse Current (V = 5V) I - A R R Green 10 Temperature Coefficient of Hyper Red 0.14 peak TC - nm/C peak I = 20mA, -10C T 85C Green 0.12 F Temperature Coefficient of Hyper Red 0.05 dom TC - nm/C dom I = 20mA, -10C T 85C Green 0.08 F Temperature Coefficient of V Hyper Red -1.9 F TC - mV/C V I = 20mA, -10C T 85C Green -1.9 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Green Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C J Operating Temperature T -40 To +85 C op Storage Temperature T -40 To +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 185 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - 2 Thermal Resistance (Junction / Ambient) R 700 720 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 600 600 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAL0182 / 1203012005 Rev No: V.12A Date: 01/26/2021