PKC040-010-000

TECHNICAL SPECIFICATION Chemical Spill Kit 15 LITRE SPILL MANAGEMENT THE KIT IS SUITABLE FOR SMALL CHEMICAL SPILLS & IS OFTEN FOUND IN LABORATORIES CONTENTS OF KIT DESCRIPTION QUANTITY Chemical Pads 15 Chemical Socks 1 Disposal Bags & Ties 1 Clear Zip Bag 1 Instruction Sheet 1 DIMENSIONS OF INNER & OUTER PACKAGING Inner: Width: 500mm Height: 400mm Depth: 90mm Weight: 1.4Kg (Approx) Outer: Width: 430mm Height: 765mm Length: 590mm Weight: 14Kg (Approx) Quantity: 10 MATERIALS Pads and Socks: Melt Blown Polypropylene (Yellow) PAD & SOCK PERFORMANCE Leaflets: Printed Paper PRODUCT Chemical Pads Chemical Socks Bags: Polythene 0.48 x 0.43 0.07 x 1.2 SIZE (METRES) Ratchet Ties: Nylon 0.8 3 ABSORPTION TOTAL 12 3 ABSORPTION CHEMICAL SPILL KIT USE KIT TOTAL 15 Before entering hazard area, be sure to wear the appropriate personal ABSORPTION protective equipment for the substance spilled As per instruction leaflet, deploy the Pads and Socks as required to contain and soak up the spillage PAD & SOCK HANDLING & STORAGE No special handling is required CHEMICAL SPILL KIT DISPOSAL It is recommended that this product is kept dry at an ambient temperature in storage Put all used product into the bags and seal Dispose of all contaminated product in accordance with local regulations for the chemical involved Report and re-order product as required PAD & SOCK LIMITATIONS OF USE Melt Blown Polypropylene is not suitable for use in areas where strong organic peroxides or concentrated acids at 60C or above PAD & SOCK CONFORMITY are used If in doubt, advice should be sught, before use All are tested in accordance with BS7959 part 1 MANUFACTURING FOR SAFETY UKSALES JSP.CO.UK CUTOUT WWW.JSP.CO.UK TEL: +44 (0)1993 826050 Issued 18/12/12, V1 WHITE FILL WHITE OUTERX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for jsp manufacturer: Other Similar products are found below : PKC040-010-000