Product Information

PEM1312

PEM1312 electronic component of Infomart IT Solutions

Datasheet
MODULE, POE, 802.3AF, 12V, 12.95W

Manufacturer: Infomart IT Solutions
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 19.4054 ea
Line Total: USD 19.4054

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

PEM1312
Infomart IT Solutions

1 : USD 20.5664
5 : USD 19.2113
10 : USD 18.6179
50 : USD 16.0496

     
Manufacturer
Product Category
Module Applications
Data Rate
Module Interface
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
PES4024GPC0 electronic component of Infomart IT Solutions PES4024GPC0

MODULE, POE, SPLITTER, 24V
Stock : 0

PES4012GPC0 electronic component of Infomart IT Solutions PES4012GPC0

MODULE, POE, SPLITTER, 12V
Stock : 0

PEM3024C electronic component of Infomart IT Solutions PEM3024C

POE, PD MODULE, 24V
Stock : 0

PEM3012C electronic component of Infomart IT Solutions PEM3012C

MODULE, POE, 802.3AF / AT, 12V, 30W
Stock : 0

PEM1305 electronic component of Infomart IT Solutions PEM1305

MODULE, POE, 802.3AF, 5V, 12.95W
Stock : 0

PEM1212 electronic component of Infomart IT Solutions PEM1212

MODULE, POE, 802.3AF, 12V, 12.95W
Stock : 0

PEM1303 electronic component of Infomart IT Solutions PEM1303

MODULE, POE, 802.3AF, 3.3V, 10W
Stock : 0

PEM1205 electronic component of Infomart IT Solutions PEM1205

MODULE, POE, 802.3AF, 5V, 12.95W
Stock : 0

PEM1405 electronic component of Infomart IT Solutions PEM1405

POE PD MODULE, 5V, 12.95W
Stock : 0

PEM1412 electronic component of Infomart IT Solutions PEM1412

POE PD MODULE, 12V, 12.95W
Stock : 0

Image Description
F-596-C electronic component of Waldom F-596-C

4 X 1/2 PAN HEAD SCREW
Stock : 1

RVUVK105CH020BW-F electronic component of Taiyo Yuden RVUVK105CH020BW-F

CAP, HIGH FREQ, 0402, 50V, C0H
Stock : 1

MPZ2012-KIT electronic component of TDK MPZ2012-KIT

C216-005
Stock : 1

RVEVK105CH3R9JW-F electronic component of Taiyo Yuden RVEVK105CH3R9JW-F

CAP, HIGH FREQ, 0402, 16V, C0H
Stock : 1

RMJMK063BJ224MP-F electronic component of Taiyo Yuden RMJMK063BJ224MP-F

CAP 0.22UF 6.3VDC X5R 20% SMD 0201
Stock : 1

RMUMK105CG3R9CV-F electronic component of Taiyo Yuden RMUMK105CG3R9CV-F

CAP, MLCC, 0402, 50V, C0G, 3.9
Stock : 1

OSTOQ025350 electronic component of On Shore Technology OSTOQ025350

Conn Shrouded Header (4 Sides) HDR 2 POS 5.08mm Solder ST Thru-Hole
Stock : 1

F-465-C electronic component of Waldom F-465-C

F465C waldom
Stock : 1

F-524-C electronic component of Waldom F-524-C

F524C waldom
Stock : 1

F-040-C electronic component of Waldom F-040-C

F040C waldom
Stock : 1

PEM1300 SERIES by Power Over Ethernet PD Module PRODUCT SELECTOR Nominal Output Power 4 Efficiency 3 6,7 Input Voltage Voltage (Maximum) Part Number Marking (Volts DC) (Volts DC) (%) (Watts) PEM1303 3 48 3.3 80 10 PEM1305 5 48 5 81 12.95 PEM1312 12 48 12 84 12.95 5 6 ABSOLUTE MAXIMUM RATINGS , PRODUCT OVERVIEW Supply Voltage (V ) 0V 57V DC CC The PEM1300 series of power extraction O O Storage Temperature (TS) -25 C 100 C modules, have complete compliance with the IEEE 802.3af Power-Over-Ethernet (PoE) Output Voltage (V ) 0V to controlled output voltage (operating or non-operating) OUT standard, and are designed to extract power from CAT5 Ethernet cable when sourced by a IEEE 802.3af compliant Power Sourcing Equipment INPUT CHARACTERISTICS (PSE). 4 Parameter Symbol Min. Typ . Max. Units With the increasing demand for Green Power 7 Input Voltage VIN 36 48 57 Volts IEEE has emphasized the need for power right- s izing . The PEM1300 series Powered Device Under Voltage Lockout VUVLO 30 36 Volts (PD) modules provides full PoE signature and 8 10 Input Current , I 350 400 mA programmable power classification for granular IN power management. 9 O Operating Temperature TOP -20 25 70 C 10 Its high efficiency DC-DC converter provides a IEEE 802.3af Power Classification Programmable Class 0, 1, 2, or 3 well regulated low noise and low ripple output with in-built overload and output short-circuit DC OUTPUT CHARACTERISTICS protection. 4 Parameter Symbol Min. Typ . Max. Units The PEM1300 series provides a quick, easy, and 8 Line Regulation V 0.2% LNRG low cost method for Ethernet equipment 8 manufacturers to PoE enable their equipment. Load Regulation VLDRG 0.5% 5, 8 Output Ripple and Noise V 80 mV p-p RIP PRODUCT FEATURES Isolation Voltage VISOL 1500 V DC Fully IEEE 802.3af compliant O Temperature Coefficient (Slope) TC 100 300 ppm C 1 12.95 watt output load IEEE Power class programmable (Green) Figure 1 - BLOCK DIAGRAM and TYPICAL CONNECTIONS 1500 Volt DC isolation (Input to Output) ADJ VINA+ PEM1300 ~ 3.3V, 5V, 12V DC output voltage models ~ +VDC Input + - +VDC Compact package minimum PCB footprint ~ ~ IEEE Minimal external components required 802.3af DC ~ + 2 DC-DC ~ Output Overload and short circuit protection Signature C1 Converter Input + - and 470uF Wide input voltage (36V to 57V DC) Low ESR Control ~ ~ -VDC Adjustable output voltage VINB- CP1 -VDC CP2 RoHS 2002/95/EC compliant Low output ripple and noise (Optional) C2 Safety Capacitor (for EMI tuning) Low cost 3 0 Output voltage typical 3% at T of 25 C with a nominal input voltage and rated output current. A 4 At nominal Vin at 67% load 5 0 All specifications typical are at T of 25 C with a nominal input voltage and rated output current A unless otherwise noted. These are meant as a design aid only and are indicative, and not guaranteed. 6 Exceeding the absolute maximum ratings may cause permanent damage to the product. We do not imply functional operation under these conditions. These ratings assume free air flow. 7 With minimum load 100mA 8 Please refer to IEEE802.3af standards document. Maximum input current is dependent on power 1 class, and input voltage. Input current (DC or RMS) at V =37vDC is 350mA, at V =57vDC is PORT PORT In 5V and 12V model 230mA. Peak inrush current is 400mA for 50mS max at duty cycle of 5% max. 2 If maximum power is exceeded, the PEM1300 will 9 Please see section F.6. Thermal profile on operating temperature operate in over current mode and will auto recover when 10 Please see section F.2 Powered Device Signature and Class programming for more details the over load condition is removed. www.poweredethernet.com PEM1300 11G-R0-8 (DRAFT) Page 1 of 5 PEM1300 SERIES by Power Over Ethernet PD Module FUNCTIONAL DESCRIPTION F.1. Inputs The PEM1300 is compatible with all IEEE 802.3af compliant Power Sourcing Equipment (PSE) and supports the different power injection options of Data/Signal pair (Mode A) or Spare Pair (Mode B). See Figure 2 Typical System Configuration. As per IEEE 802.3af, it is specified that the PSE does not apply power to the both outputs at the same time i.e. 4 pair injection. (Refer to IEEE802.3af standards for more information). The PEM1300 provides onboard input bridge rectifiers for improved system integration and minimal external components. Figure 2 Typical System Configuration In Mode A Signal Pair injection, the signal lines carry both data and power. In Mode B Spare Pair injection, the Signal pair carries only data, and the spare pair carries power. IEEE 802.3af COMPLIANT POWER POWERED DEVICE (PD) 4 4 SOURCING EQUIPMENT (PSE) + 5 5 SPARE PAIR +/- 1 1 ~ TX RX - + +VDC 2 2 DATA / ~ ~ SIGNAL PAIR DC PEM1300 PSE - + OUTPUT (48V) ~ -VDC 3 3 RX TX 6 6 DATA / SIGNAL PAIR +/- 7 7 - 8 8 SPARE PAIR F.2. Powered Device (PD) Signature and Power Classification When the PEM1300 is connected to a Cat 5e or greater Ethernet cable from an IEEE 802.3af compliant Power Sourcing Equipment (PSE), Endspan or Midspan, it will automatically present a Powered Device (PD) signature to the PSE, as and when requested. The PSE will then recognise that a PD is connected to that line and supply power. With the growing emphasis on Green Power, in the latest standard, IEEE has stressed for PDs to implement the IEEE 802.3af Power Classification system to ensure correct provisioning of power from the PSE. To help in proper power level provisioning and improved power management, the IEEE 802.3af standard provides for PDs to inform the PSE their required power levels via a Class system. The classes are defined as per Table 1 below. The PEM1300 allows for programming the Class by placing a 1/16W or greater and 1% tolerance resistor detailed in Table 1. Table 1 Power Classification programming 1/16W or greater and 1% tolerance resistor between PoE Power Class Required PD Power Pin 4 (VINB ) and Pin 6 (CP2) Pin 5 (CP1) and Pin 6 (CP2) 0 0.44W ~ 12.95W Do not connect Any value 10K to 100 K 1 0.44W ~ 3.84W 280k Do not connect 2 3.84W ~ 6.49W 143k Do not connect 3 6.49W ~ 12.95W 90k9k Do not connect 4 Reserved for 802.3at Reserved Reserved Important : Never connect Pin 4 (VINB-) to Pin 5 (CP1). Do not connect Pins 4 (VINB-) and 5 (CP1) and 6 (CP2) at the same time. Connect Pin 5 (CP1) only to Pin 6 (CP2) and only as per instructions in Table 1. Pin 5 and 6 may be left unconnected for default Class 0 but is not recommended. F.3. Isolation IEEE802.3af section 33.4.1 calls for a Powered Device (PD) to meet safety isolation requirement by meeting the electrical strength test of IEC 60950 sub clause 6.2. Infomarts PoweredEthernet PEM1300 modules meet or exceed 1500V impulse test. This is also referred to as Hi Pot Test, Flash Tested, Withstand Voltage, Proof Voltage, Dielectric Withstand Voltage & Isolation Test Voltage. www.poweredethernet.com PEM1300 11G-R0-8 (DRAFT) Page 2 of 5

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted