Product Information

CP33-153NS

CP33-153NS electronic component of IEE

Datasheet
Sensor: pressure; Range:0,2÷100N; Operating temp: -40÷75°C; 1mA

Manufacturer: IEE
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 22.997 ea
Line Total: USD 22.997

88 - Global Stock
Ships to you between
Thu. 04 Apr to Wed. 10 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
88 - Global Stock


Ships to you between Thu. 04 Apr to Wed. 10 Apr

MOQ : 1
Multiples : 1
1 : USD 23.101
2 : USD 21.853
3 : USD 21.84

     
Manufacturer
Product Category
Measuring Range
Type Of Sensor
Max Operating Current
Operating Temperature
Body Dimensions
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
DMH23441G-06 electronic component of IEE DMH23441G-06

DMH23441G06 iee
Stock : 25

CP45-154NS electronic component of IEE CP45-154NS

Sensor: pressure; Range:0,2÷100N; Operating temp: -40÷75°C; 1mA
Stock : 129

CP6-149AS electronic component of IEE CP6-149AS

Sensor: pressure; Range:0,2÷100N; Operating temp: -40÷75°C; 1mA
Stock : 76

CP9-150NS electronic component of IEE CP9-150NS

Sensor: pressure; Range:0,2÷100N; Operating temp: -40÷75°C; 1mA
Stock : 17

LR4940A electronic component of IEE LR4940A

LR4940A iee
Stock : 189

CP1-149NS electronic component of IEE CP1-149NS

Sensor: pressure; Range:0,2÷100N; Operating temp: -40÷75°C; 1mA
Stock : 268

CP15-151NS electronic component of IEE CP15-151NS

Sensor: pressure; Range:0,2÷100N; Operating temp: -40÷75°C; 1mA
Stock : 5

327 electronic component of IEE 327

Flanged Midget Lamp - T-1 3/4.
Stock : 32

386 electronic component of IEE 386

T-1 3/4 Midget Groove Lamp
Stock : 50

Image Description
MPXM2102AS electronic component of NXP MPXM2102AS

Pressure Sensor 14.5PSI (100kPa) Absolute Male - 0.12" (2.97mm) Tube 0 mV ~ 40 mV (10V) 5-SMD Module, Top Port
Stock : 1280

93.632.7353.0 electronic component of Wieland 93.632.7353.0

MALE P & STRAIN-RELST18/3S2 ZEV SW FLM
Stock : 1

93.731.3653.0 electronic component of Wieland 93.731.3653.0

FEMALE PART ST18/5B1 ZEVNSW RDM
Stock : 1

NBPMANN150PGUNV electronic component of Honeywell NBPMANN150PGUNV

Pressure Sensor 150PSI (1034.21kPa) Vented Gauge Male - 0.11" (2.74mm) Tube 0 mV ~ 130 mV (5V) 4-SMD, J-Lead, Top Port
Stock : 8

FXTH8709116T1 electronic component of Nexperia FXTH8709116T1

Pressure Sensor, Accelerometer and Temperature Sensor Automotive 24-Pin QFN EP T/R
Stock : 1

ABPDANT030PG0D3 electronic component of Honeywell ABPDANT030PG0D3

Board Mount Pressure Sensors Basic Pressure Sensor
Stock : 1

ABPDRRT005PG2D3 electronic component of Honeywell ABPDRRT005PG2D3

Board Mount Pressure Sensors Basic Pressure Sensor
Stock : 0

ADP1131 electronic component of Panasonic ADP1131

Board Mount Pressure Sensors PF Pressure sensor
Stock : 0

TFS5/120-P electronic component of Tenmex TFS5/120-P

Sensor: film strain gauge; Operating temp: -40÷200°C; 5%; ±0,5%
Stock : 0

GD25 electronic component of UNEO GD25

Pressure Sensors RoHS
Stock : 0

IEE International Electronics & Engineering IEE S.A. ZAE Weiergewan 11, rue Edmond Reuter L-5326 Contern Luxembourg Please contact your closest retailer for additional information DATA SHEET FOR STANDARD SENSOR TYPE CP149-150-151-152-153-154-174 (FROM 2011) Sensor Description Sensor Type Pressure Sensitive Single Sensor Typical applications Infinite variable resistive user interface devices Number of active areas / cells 1 Dimensions and available connectors See layout drawings on annexe Manufacturing Tolerances Length and width tolerances according DIN 7151 IT 14 Thickness Nominal value (see drawings) +/- 12 % Total manufacturing tolerance +/- 0.8 mm Base Materials Topside substrate PET film Laminating adhesive Acrylic Backside substrate PET film Backing adhesive (upon request) Acrylic Operating Parameters Standby resistance (no load) R > 1 M NL Typical activation resistance range 1 M > R > 2 k L 2 2 for a pressure range of 0.5-100 N/cm (i.e. per cm of activated area) Typical Conductor lead resistance 25 2 Typical lifetime when used according to > 1.000.000 cycles 1kg/cm and 1Hz application advice (see page 2) Typical sensor response time on single activation 2-3 ms (mechanical) 2 Current density < 1 mA/cm (of activated area) Parasitic capacitance < 1 nF 2 Power dissipation < 1 mW/cm (of activated area) Operating Conditions Nominal operating voltage 1..5 V Use pulsed voltage (duty cycle < 2 %) for extended lifetime and heavy duty conditions Operating temperature range -40 to +85 C (-40 to 185 F) Operating humidity range 95 % R.H. Revision 1 15.03.11 Page 1 of 11 IEE S.A. ZAE Weiergewan 11, rue Edmond Reuter L-5326 Contern Luxembourg www.iee.lu Data Sheet Revision Single cell sensor type CP 149-150-151-152-153-154-174 1 This general specification sheet has been created on 15.03.11 and supersedes all previous versions. Standard Test Criteria at Time of Delivery Standby resistance R > 1 M RT and 5 V DC NL Measuring device IEE load applicator (see table 1 for load values) Force probe surface material Rubber pad Thickness of pad 2 mm +/- 0.2 mm Rubber hardness 65 Shore A (+/- 10 Shore A) Endtest criteria: Sensor Type Detection area Force Test Typical resistance at dimension probe weight test load diameter load Standard 149 4 mm 500 g circular, 6mm 30 k > R > 3 k L Standard 150 6 mm 1100 g 8.1 7.5 mm 15 k > R > 5 k L Standard 151 6 mm 1100 g circular, 12 mm 15 k > R > 5 k L Standard 152 6 mm 1100 g circular, 16 mm 15 k > R > 5 k L Standard 153 6 mm 1100 g 22.3 21.6 mm 15 k > R > 5 k L Standard 154 6 mm 1100 g 40.6 40.3 mm 15 k > R > 5 k L Standard 174 6 mm 1100 g circular, 25 mm 15 k > R > 5 k L Application Advice The sensor should be mounted onto an even, smooth, and hard support surface like, e.g., a plastic, glass or metal plate. The actuator should always be placed perpendicular to the sensor surface in the centre of the active area. Avoid offset mounting. Ensure that the actuator is smaller than the active area of the sensor. If this is not feasible, use a soft activator for force transmission and distribution like, e.g., a soft rubber with hardness 25 Shore A. Do not expose the sensor to permanent load to avoid possible signal drift. Never bend the sensor in the active area to avoid mechanical pre-load and false signals. Do not bend the connection tail to a radius < 8 mm to avoid broken conductor lines. All sensors feature an air vent. Take care not to block it and to avoid liquids from penetrating through it. Revision 1 15.03.11 Page 2 of 11 IEE S.A. ZAE Weiergewan 11, rue Edmond Reuter L-5326 Contern Luxembourg www.iee.lu

Tariff Desc

8542.31.20 No ..Linear/analogue and peripheral integrated circuits, timers, voltage regulators, A/D and D/A converters, telecommunication and modem integrated circuits, other than board level products
I.E.E.
IEE (Inds. Electronic Engineers)

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted