Stainless Steel Pressure Sensors BL Series FEATURES Accuracies to 0.25% Easy to clean flush diaphragm Meet a wide range of applications with ranges from 0 to 5.0 psi to 0 to 20,000 psi Absolute models available - vacuum as reference I/S certified when used with appropriate barriers TYPICAL APPLICATIONS Depth sensing Water resource management Process controls Marine instrumentation Chemical manufacture The BL pressure transmitter has a conventional 4 mA to 20 mA output and Paint spraying is available with accuracies to 0.25%. The BL is approved for Factory Mutual Tank/liquid level as an intrinsically safe* device for use in hazardous areas. Rated for Class 1, Div. 1 groups A through G. All BLs with absolute ranges and all BLs over 50.0 psi are hermetically sealed. The pressure sensitive diaphragm is either 316L or 15-5 stainless steel, depending on the pressure range selected. The BLs flush diaphragm is especially suited to measuring viscous fluids, slurries, and media where system flushing is necessary. Its overall price/performance ratio makes it ideal for many process environments. * When used with approved barriers. WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or WARNING in any other application MISUSE OF DOCUMENTATION where failure of the product The information presented in this product sheet is for reference only. Do could result in personal not use this document as a product installation guide. injury. Complete installation, operation, and maintenance information is Failure to comply with these instructions could provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or result in death or serious injury. serious injury. Sensing and Control Stainless Steel Pressure Sensors BL Series SPECIFICATIONS Pressure Ranges 0 to 5 psig 0 to 15.0, 25.0, and 50.0 psig or psia 0 to 100, 200, 500, 1000, 2000, 3000, 5000, 10,000 and 20,000 psis Physical Proof Pressure 2 X rated range without damage (30,000 psi maximum) Burst Pressure 5 X rated range without bursting (50,000 psi maximum) Material in contact 316L stainless steel <100 psi with media 15-5 PH stainless steel 100 psi Shock Resistance 50 g peak 11 milliseconds Vibration Resistance Meets MIL-STD 810C, Fig. 514-4, Curve AK, Time Schedule II, Random Vibration Test Overall g rms = 11.9 minimum Weight Less than 2.5 oz 70.0 gm without adapter or mating connector Electrical Span 16.0 0.16 mA into 0 to 800 loop resistance at 25 C 77 F Excitation Voltage 12.0 Vdc to 36.0 Vdc Null Offset 4.0 0.4 mA at 25 C 77 F Reverse Polarity Protection Yes Insulation Resistance Greater than 1000 megohms at 25.0 Vdc max. Electrical Connection 6 pin PTIH-10-6P or equivalent (Mating connector is PT06E-10-6S Honeywell P/N MS20455A01) not included. Performance Accuracy 1.0% from best fit straight line including effects of non-linearity, hysteresis, and repeatability unless specified by order guide. Operating -40 C to 82 C -40 F to 180 F Temperature Range Compensated -1 C to 54 C 30 F to 130 F Temperature Range Thermal Effect on Zero Less than 2% span within the compensated temperature range H version is 1% Thermal Effect on Span Less than 1% span within the compensated temperature range Note: All specifications are measured at 25 C 77 F and at rated excitation unless otherwise specified. 2 Honeywell Sensing and Control