3208I.S

EC Declaration of Conformity TEST RESULTS Type K to BS EN 60584-1:2013 We hereby declare that the product (range) listed below meet Instrument Type: ........................................................................... 3208 I.S. the intent of the Electromagnetic Compatibility (EMC) Directive 2004/108/EC and Equipment for use in potentially explosive Serial Number: .............................................................................. atmospheres ATEX Directive 94/9/EC. THERMOMETER This instrument has been designed to meet P200 I.S. Manometer & environmental condition: IP64 3208 I.S. Thermometer Ex II 2G Ex ia IIC T4 (-20C < Ta < +50C) EC - Type Examination Certificate No. Baseefa03ATEX0599 Issued by: Baseefa (2001) Ltd Tested by: ............................... Date: ......................................... (NB No.1180) This declaration is made for products manufactured and tested with respect to the relevant parts of:- Type K BS EN 61000-6-3:2007+A1:2011 Generic emissions standard 0C 185C -30C 700C 900C BS EN 61000-6-1:2007 Generic immunity 32F 365F -22F 1292F 1652F standard OPERATING for the Electromagnetic Compatibility Directive, and:- INSTRUCTIONS BS EN 60079-0:2012+A11:2013 Electrical apparatus for potentially explosive atmospheres - Intrinsic Safety i The overall performance of the instrument is obtained by Digitron a brand of Elektron BS EN 60079-11:2012 Explosive atmospheres. combining the stated accuracy and any uncertainty due to the measurement process. Equipment protection by intrinsic safety. Technology UK Ltd Woodland Road, Torquay, for the ATEX Directive, when installed and used in Devon, TQ2 7AY, England accordance with the operating instructions. Tel +44 (0)1803 407693 Fax +44 (0)1803 407699 Email sales digitron.com www.digitron.com Issue Date: ........... Signed: ................................. Martin Jackson, Group Head of Technology - Elektron Technology UK Ltd 13264 rev. 7a EMC OPERATING INSTRUCTIONS INSTRUMENT OPERATION This meter has been designed to operate under intrinsically safe conditions. The necessary protection features employed in the Operating Temperature (Ambient) DESCRIPTION design may result in the display reading being affected by the presence of high electromagnetic fields. Also, high electrostatic -20C to +50C discharge to the case may result in the meter switching off. This The instruments window surround shows instrument type, is a fail-safe condition and the meter can be switched back on in the operating ranges and the category code EExiaIICT4. On - Off the normal way. The code indicates the instrument can be used in flammable or explosive atmospheres, up to and including Depress the button marked for instrument ON and for OFF. Zone 1. WARRANTY Resolution/Range/Accuracy The rear label also displays the code alongside the This instrument is warranted for 12 months from date Select either 1 or 0.1 for resolution required. European Community mark and ATEX group and category. of purchase. (See below): Digitron a brand of Elektron Resolution Range Accuracy During the warranty period any defective instrument will be Name and Address of Manufacturer Technology UK Ltd 0.1 -50C - +199.9C 0.2% reading 0.5C repaired or replaced at the discretion of the manufacturer. This Woodland Road Torquay 1 -50C - +950C 0.2% reading 1C warranty does not cover damage or failure resulting from TQ2 7AY, UK misuse or accident. Equipment Name and Type 3208 I.S. Thermometer Probe Modification, adjustment or any alteration shall absolve Certificate Number Baseefa 03ATEX0599 NOTE: USE ONLY DIGITRON ATEX PROBE K0234IS. the manufacturer from any liability in respect of the Specific Marking of explosion protection EEx ia IIC T4 (-20C Ta +50C) Insert probe plug into the socket at the top of the instrument, instrument. ensuring correct polarity. Apply probe tip to substance being ATEX Directive marking II 2G measured. Any instrument to be repaired should be forwarded to the CE Mark with notified body number manufacturer at the owners risk. A brief description of the fault 1180 Note: Do not bring probe into contact with any surface should be included. Serial Number connected to a hazardous voltage (i.e. a voltage exceeding 30 volts RMS or 42.4 volts peak with respect to either earth Year of Manufacture or ground). In addition, probe must be handled with care. BATTERY (not supplied) NOTE: THE PROBE HANDLE IS MANUFACTURED FROM CONDUCTIVE MATERIAL. Installation NOTE: BATTERIES MUST NOT BE REMOVED/REPLACED Sensor Open Circuit or Overrange Indication IN A HAZARDOUS AREA. If either of the above occurs, the instrument display will show: Detach battery compartment cover from the rear of the instrument by removing the screw with the Allen key and lifting at the appropriate place. C / . Connect one 9V battery PP3 style zinc chloride IEC style 6F22 (type PP3S or equivalent) and lie on the insulation pad. Do not fit under the insulation pad as this could cause battery terminals to short circuit. Refit ENVIRONMENTAL SPECIFICATION compartment cover. NOTE: STANDARD, ALKALINE OR MERCURY IP Rating BATTERIES MUST NOT BE USED. This model comes with the IP64 rating as standard to the requirement of BS EN 60529:1992+A2:2013 When BAT shows on display, the battery needs replacing.