FSMD8585JSLF

F/SMD 8585 JS LF Technical terms Technische Daten Value Wert Rated Voltage Nennspannung 3V Operating voltage Betriebsspannungsbereich 2 5V Rated Current Nennstrom 80mA * Sound Output SPL at 10 cm 85dB Lautstrke Schalldruckpegel in 10 cm Coil Resistance Wicklungs-Widerstand 18 3 Resonant Frequency Resonanzfrequenz 2730Hz Operating Temperature Betriebstemperatur -40 +85C Storage Temperature Lagerungs-Temperatur -40 +85C Weight Gewicht 1g RoHS compliant RoHS konform * Applying rated voltage (2730Hz, 3.0V, duty, square wave) Bei angelegter Nennspannung (2730Hz, 3.0V, Tastverhltnis, Rechteck) Drawings Zeichnungen Pins: base material Cu finish: Sn plating 3 7 m not connected Zeichn.-Nr. Halbzeug, Werkstoff Untolerierte Mae 081008.1B Mastab Ersatz f. Vervielflt.-Pause 1 Page Blatt of von 3 Zeichn. Nr. nd. nd.-Mittlg. Tag Name Tag Name zust. Nr. gezeichnet Arbeitspause Nr. F/SMD 8585 JS LF bearbeitet 08.10.08 KS geprft normgepr. Reliability Zuverlssigkeit Item Method of test Standard Storage in High Storage in +85C test box for 96 hours temp. Storage in Storage in 40C test box for 96 hours Low temp. Temperature Make this test for 50 ycles. Cycle test One cycle shall consist of 30 min. at 40C and the 30min. at +85C. After the test the part shall meet Humidity specifications without any Cycle test degradation in appearance and performance except SPL. SPL shall be minimum 80dB/10cm a,b,d,e,g,i Make this test for 5 cycles without applying power, then expose to the room temperature for 2 hours. Drop test Drop a buzzer 9 times from the height of 750 mm to the surface of 40 mm All specifications must be thick woodenboard in 3 directions (X,Y &Z) satisfied in this condition. Solderability The part lead pins shall be immersed in molten solder maintained at 95% coverage with a continuous coating of bright solder 260 5C for a period of 5.0 0.5 seconds. Solderheat After the test the part shall meet the The part lead pins shall be immersed in molten solder maintained at 260C Resistance specification without any degradation for a period of 40 seconds. in appearance and performance Lead Pull The part shall be pushed with a force of 9.8N for 10 1 seconds behind the part After the test the part shall meet Operating Life 1. Ordinary Temperature specifications without any The part shall be subjected to 1000 hours at room temperature (2510C) degradation in appearance and with 3V, 2730Hz applied performance except SPL. 2. High Temperature SPL shall be minimum The part shall be subjected to 500 hours at +85C with 5V, 2730Hz applied 83dB/10cm 3. Low Temperature The part shall be subjected to 500 hours at 40C with 2V, 2730Hz applied. Recommended Temp. Profile for Reflow Oven Zeichn.-Nr. Halbzeug, Werkstoff Untolerierte Mae 081008.1B Mastab Ersatz f. Vervielflt.-Pause 2 Page Blatt of von 3 Zeichn. Nr. nd. nd.-Mittlg. Tag Name Tag Name zust. Nr. gezeichnet Arbeitspause Nr. F/SMD 8585 JS LF bearbeitet 08.10.08 KS geprft normgepr.