CYPD1121-40LQXI

Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCCG1 Datasheet USB Type-C Port Controller with Power Delivery THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS General Description CCG1 provides a complete USB Type-C and USB Power Delivery port control solution. The core architecture of CCG1 enables a base Type-C solution that can scale to a complete 100-W USB Power Delivery with Alternate Mode multiplex support. CCG1 is also a Type-C cable ID IC for active and passive cables. The CCG1 controller detects connector insert, plug orientation and VCONN switching signals. CCG1 makes it easier to add USB Power Delivery to any architecture because it provides control signals to manage external VBUS and V power management solutions and external mux controls for most single cable-docking solutions. CONN The CCG1 family of devices are fixed-function parts that use a configuration table to control their operation in different applications. The functionality is implemented in firmware and will be certified against USB Implementers Forum (USB-IF) compliance tests when available. The programmability allows CCG1 devices to track any USB Specification changes. For information on accessing the source code, contact Cypress support. CCG1 devices are not recommended for new designs. However, customers may continue to purchase these CCG1 devices for their existing designs already in production. Type-C Support Applications Integrated transceiver (BB PHY) Notebooks, tablets, monitors, docking stations Supports up to two USB ports with PD Power adapters, USB Type-C cables Supports routing of all protocols through an external mux Features PD Support Supports Provider and Consumer roles 32-bit MCU Subsystem Supports all power profiles 48-MHz ARM Cortex-M0 CPU with 32-KB flash and 4-KB SRAM Low-Power Operation Integrated analog blocks 3.2 V to 5.5 V operation 1 12-bit, 1-Msps ADC for VBUS voltage and current monitoring Sleep 1.3 mA, Deep Sleep 1.3 A Dynamic overcurrent and overvoltage protection Packages Integrated digital blocks 40-pin QFN Two configurable 16-bit TCPWM blocks 16-pin SOIC 2 One I C master or slave 35-ball wafer-level CSP (WLCSP) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-93639 Rev. *L Revised December 3, 2020