Product Information

MS3472L8-98P

Product Image X-ON

Datasheet
Conn MIL-DTL-26482 Circular PIN 3 POS Crimp ST Flange Mount 3 Terminal 1 Port
Manufacturer: Conesys



Price (Ex GST)

From 32.703

33 - Global Stock
Ships to you between
Fri. 16 Apr to Thu. 22 Apr

MOQ: 1 Multiples:1
Pack Size :   1
Availability Price Quantity
33 - Global Stock


Ships to you between Fri. 16 Apr to Thu. 22 Apr

MOQ : 1
Multiples : 1

Stock Image

MS3472L8-98P
Conesys

1 : $ 42.244
10 : $ 39.0903
30 : $ 38.0683
50 : $ 36.2799
100 : $ 35.2579
250 : $ 33.9804
500 : $ 32.703

Buy
45 - Global Stock


Ships to you between Fri. 16 Apr to Thu. 22 Apr

MOQ : 1
Multiples : 1

Stock Image

MS3472L8-98P
Conesys

1 : $ 41.473
10 : $ 38.7733
30 : $ 36.9516
50 : $ 34.6097
100 : $ 33.9175

Buy
   
Manufacturer
Conesys
Product Category
Circular MIL Spec Connector
Category
Circular Mil Spec Connector
LoadingGif
Image
Mfr. Part No.
Description
Stock
Conn MIL-DTL-26482 Circular SKT 6 POS Crimp ST Flange Mount 6 Terminal 1 Port
14
Conn MIL-DTL-26482 Circular PIN 6 POS Crimp ST Flange Mount 6 Terminal 1 Port
163
Conn MIL-DTL-26482 Circular SKT 6 POS Crimp ST Flange Mount 6 Terminal 1 Port
14
CONN 26482 CIRC PIN 10 POS CRMP ST WALL MT
22
Conn MIL-DTL-26482 Circular SKT 3 POS Crimp ST Flange Mount 3 Terminal 1 Port
33
Conn MIL-DTL-26482 Circular PIN 3 POS Crimp ST Flange Mount 3 Terminal 1 Port
33
Conn MIL-DTL-26482 Circular SKT 3 POS Crimp ST Flange Mount 3 Terminal 1 Port
33
Conn MIL-DTL-26482 Circular PIN 6 POS Crimp ST Flange Mount 6 Terminal 1 Port
163
Conn MIL-DTL-26482 Circular SKT 6 POS Crimp ST Flange Mount 6 Terminal 1 Port
14
Conn MIL-DTL-26482 Circular PIN 6 POS Crimp ST Flange Mount 6 Terminal 1 Port
163
Image
Mfr. Part No.
Description
Stock
Conn MIL-DTL-83723 Circular SKT 28 POS Crimp ST Jam Nut 28 Terminal 1 Port
18
CONN MIL-C-83723 CIRC SKT 3 POS CRMP ST WALL MNT
82
Conn MIL-DTL-38999 Circular PIN 26 POS Crimp ST Cable Mount 26 Terminal 1 Port
39
Conn MIL-DTL-38999 Circular SKT 13 POS Crimp ST Box Mount 13 Terminal 1 Port
61
Conn MIL-DTL-26482 Circular PIN 19 POS Crimp ST Cable Mount 19 Terminal 1 Port
105
MIL-C-83723, SERIES III, THREADED, CRIMP REAR RELEASE
69
Conn MIL-DTL-38999 Circular PIN 6 POS Crimp ST Wall Mount 6 Terminal 1 Port
2
Conn MIL-DTL-26482 Circular PIN 39 POS Crimp ST Cable Mount 39 Terminal 1 Port
65

26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Performance Specifications Series 2 Performance Specifications Durability Mated connectors withstand a minimum of 250 mating Operating Temperature Range cycles for RFI plug (MS3475) and 500 cycles for standard Classes A, L and S*: -55?C to +200?C (-67?F to +392?F) plug (MS3476). Classes W, Z* and BN*: -55?C to +175?C (-67?F to +347?F) Shock and Vibration Requirements Material and Finish Data (Class) Wired, mated connectors shall not be damaged, coupling A ? aluminum shell, black anodized finish (RoHS) ring shall not loosen, and there shall be no interruption of L ? aluminum shell, electroless nickel finish electrical continuity longer than one microsecond when W ? aluminum shell, olive drab cadmium over nickel base subjected to the following: S* ? stainless steel shell, passivated (RoHS) BN* ? aluminum shell, black nickel finish (Aero P/N only) Shock Z* = Aluminum shell, Black Zinc Nickel finish (RoHS) Mated connectors withstand a pulse of approximate half (Aero p/n only) sine wave of 300 G magnitude with duration of three milliseconds applied in each direction of the three major axes. Corrosion Resistance Classes A, S*, W and Z* withstand 500-hour salt spray. Vibration Class BN* withstands 350-hours salt spray. Class L with- Mated connectors withstand the following vibration levels: ? stands 48-hour salt spray. Random vibration per MIL-STD-202, method 214, test condition II, letter J. Environmental Seal Wired, mated connectors with specified accessories at - Shielding Effectiveness tached, shall meet the altitude-immersion test specified in RFI attenuation at the specified frequency meets the require - MIL-DTL-26482 Series 2. ments of MIL-DTL-26482 Series 2. ? RFI shielding effectiveness of mated connectors with Fluid Resistance RFI backshells is measured in a triaxial radio frequency Connectors resist specified immersions in MIL-PRF-7808 leakage fixture. (lubricating oil), MIL-PRF-23699 (lubricating oil), MIL-PRF-5606 (hydraulic fluid), M2-V Chevron oil, Cool - Shell-to-Shell Conductivity ? anol 25, ASTM D4814 (gasoline), SAE-AMS1424 Type I With RFI spring fingers, the maximum potential drop (defrosting fluid), MIL-DTL-5624 (JP-5), and solvents shall not exceed 5 millivolts. ? specified in Method 215 of MIL-STD-202. Without spring fingers, the maximum potential drop shall not exceed 200 millivolts. * Not on QPL, can be supplied to Aero-Electric P/N only. Voltage Rating Suggested Operating Voltage** Test Voltage Test Voltage Test Voltage Test Voltage (Sea Level) Sea Level 50,000 Ft. 70,000 Ft. 110,000 Ft. Service Rating AC (RMS) DC V RMS V RMS V RMS V RMS I 600 850 1,500 500 375 200 II 1,000 1,275 2,300 750 500 200 ** To be used by designer only as a guide. www.conesys.com ? ?127 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Performance Specifications Series 2 Performance Specifications Durability Mated connectors withstand a minimum of 250 mating Operating Temperature Range cycles for RFI plug (MS3475) and 500 cycles for standard Classes A, L and S*: -55?C to +200?C (-67?F to +392?F) plug (MS3476). Classes W, Z* and BN*: -55?C to +175?C (-67?F to +347?F) Shock and Vibration Requirements Material and Finish Data (Class) Wired, mated connectors shall not be damaged, coupling A ? aluminum shell, black anodized finish (RoHS) ring shall not loosen, and there shall be no interruption of L ? aluminum shell, electroless nickel finish electrical continuity longer than one microsecond when W ? aluminum shell, olive drab cadmium over nickel base subjected to the following: S* ? stainless steel shell, passivated (RoHS) BN* ? aluminum shell, black nickel finish (Aero P/N only) Shock Z* = Aluminum shell, Black Zinc Nickel finish (RoHS) Mated connectors withstand a pulse of approximate half (Aero p/n only) sine wave of 300 G magnitude with duration of three milliseconds applied in each direction of the three major axes. Corrosion Resistance Classes A, S*, W and Z* withstand 500-hour salt spray. Vibration Class BN* withstands 350-hours salt spray. Class L with- Mated connectors withstand the following vibration levels: ? stands 48-hour salt spray. Random vibration per MIL-STD-202, method 214, test condition II, letter J. Environmental Seal Wired, mated connectors with specified accessories at - Shielding Effectiveness tached, shall meet the altitude-immersion test specified in RFI attenuation at the specified frequency meets the require - MIL-DTL-26482 Series 2. ments of MIL-DTL-26482 Series 2. ? RFI shielding effectiveness of mated connectors with Fluid Resistance RFI backshells is measured in a triaxial radio frequency Connectors resist specified immersions in MIL-PRF-7808 leakage fixture. (lubricating oil), MIL-PRF-23699 (lubricating oil), MIL-PRF-5606 (hydraulic fluid), M2-V Chevron oil, Cool - Shell-to-Shell Conductivity ? anol 25, ASTM D4814 (gasoline), SAE-AMS1424 Type I With RFI spring fingers, the maximum potential drop (defrosting fluid), MIL-DTL-5624 (JP-5), and solvents shall not exceed 5 millivolts. ? specified in Method 215 of MIL-STD-202. Without spring fingers, the maximum potential drop shall not exceed 200 millivolts. * Not on QPL, can be supplied to Aero-Electric P/N only. Voltage Rating Suggested Operating Voltage** Test Voltage Test Voltage Test Voltage Test Voltage (Sea Level) Sea Level 50,000 Ft. 70,000 Ft. 110,000 Ft. Service Rating AC (RMS) DC V RMS V RMS V RMS V RMS I 600 850 1,500 500 375 200 II 1,000 1,275 2,300 750 500 200 ** To be used by designer only as a guide. www.conesys.com ? ?127 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Part Number Development Series 2 Military and Aero-Electric Part Number Development Mil. Prefix MS34 70 L 12 - 10 P W Aero Prefix AE7 70 L 12 - 10 P W -340 Shell type 70 = Narrow flange receptacle 71 = Cable connecting receptacle 72 = Wide flange receptacle 74 = Jam nut receptacle 75 = RFI grounding plug 76 = Straight plug Class (Material and Finish) A = Aluminum shell, black anodized finish (not available in RFI plug) (RoHS) L = Aluminum shell, electroless nickel finish W = Aluminum shell, olive drab cadmium over electroless nickel base S* = Stainless steel shell, passivated (Aero part number only) (RoHS) BN* = Aluminum shell,Black Nickel finish, (RoHS), (Aero part number only) (N/A for AE775) Z* = Aluminum shell, Black Zinc Nickel finish (RoHS) (Aero p/n only) (N/A for AE775) Shell Size 08, 10, 12, 14, 16, 18, 20, 22 or 24 *Size 8 connectors must be marked 08 Insert Arrangement See pages 125 thru 126 Contact Style P = Pin S = Socket A = Pin connector less pins (with intent to use non-std contact) B = Socket connector less sockets (with intent to use non-std contacts) Polarization N = Normal (not included in part number) W, X, Y or Z = Alternate insert polarizations (see pages 123 for position availability) Modification (applies to Aero part numbers only) 01 = Less contacts (is not marked on the part) 340 = Connector kitted with M85049/31-XXX E-nut 341 = Connector kitted with M85049/52-1-XXX straight clamp 342 = Connector kitted with M85049/51-1-XXX right angle clamp Consult factory for other modifications *?Not on QPL, can be supplied to Aero part number only. Consult factory for availability. Note 1: Each connector is furnished with contacts unless Note 2: Insert layouts 8-2, 8-3 and 8-4 can only be ordered ordered less contacts (L/C) as follows: One spare contact for to Aero-Electric part number. Non standard contacts are inserts requiring 2 to 26 of each contact and two spares for required and to avoid confusion are sold ?with contacts? inserts with 27 or more of each size, and a minimum of one only. See page 121 for the correct contact part numbers. sealing plug up to 15% of the number of contacts. In addition, one plastic insetion/removal tool of each size is included. www.conesys.com ? ?128 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Performance Specifications Series 2 Performance Specifications Durability Mated connectors withstand a minimum of 250 mating Operating Temperature Range cycles for RFI plug (MS3475) and 500 cycles for standard Classes A, L and S*: -55?C to +200?C (-67?F to +392?F) plug (MS3476). Classes W, Z* and BN*: -55?C to +175?C (-67?F to +347?F) Shock and Vibration Requirements Material and Finish Data (Class) Wired, mated connectors shall not be damaged, coupling A ? aluminum shell, black anodized finish (RoHS) ring shall not loosen, and there shall be no interruption of L ? aluminum shell, electroless nickel finish electrical continuity longer than one microsecond when W ? aluminum shell, olive drab cadmium over nickel base subjected to the following: S* ? stainless steel shell, passivated (RoHS) BN* ? aluminum shell, black nickel finish (Aero P/N only) Shock Z* = Aluminum shell, Black Zinc Nickel finish (RoHS) Mated connectors withstand a pulse of approximate half (Aero p/n only) sine wave of 300 G magnitude with duration of three milliseconds applied in each direction of the three major axes. Corrosion Resistance Classes A, S*, W and Z* withstand 500-hour salt spray. Vibration Class BN* withstands 350-hours salt spray. Class L with- Mated connectors withstand the following vibration levels: ? stands 48-hour salt spray. Random vibration per MIL-STD-202, method 214, test condition II, letter J. Environmental Seal Wired, mated connectors with specified accessories at - Shielding Effectiveness tached, shall meet the altitude-immersion test specified in RFI attenuation at the specified frequency meets the require - MIL-DTL-26482 Series 2. ments of MIL-DTL-26482 Series 2. ? RFI shielding effectiveness of mated connectors with Fluid Resistance RFI backshells is measured in a triaxial radio frequency Connectors resist specified immersions in MIL-PRF-7808 leakage fixture. (lubricating oil), MIL-PRF-23699 (lubricating oil), MIL-PRF-5606 (hydraulic fluid), M2-V Chevron oil, Cool - Shell-to-Shell Conductivity ? anol 25, ASTM D4814 (gasoline), SAE-AMS1424 Type I With RFI spring fingers, the maximum potential drop (defrosting fluid), MIL-DTL-5624 (JP-5), and solvents shall not exceed 5 millivolts. ? specified in Method 215 of MIL-STD-202. Without spring fingers, the maximum potential drop shall not exceed 200 millivolts. * Not on QPL, can be supplied to Aero-Electric P/N only. Voltage Rating Suggested Operating Voltage** Test Voltage Test Voltage Test Voltage Test Voltage (Sea Level) Sea Level 50,000 Ft. 70,000 Ft. 110,000 Ft. Service Rating AC (RMS) DC V RMS V RMS V RMS V RMS I 600 850 1,500 500 375 200 II 1,000 1,275 2,300 750 500 200 ** To be used by designer only as a guide. www.conesys.com ? ?127 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert ? Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal ? Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet ? Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability ? Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate ?O? the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel ?D? hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool ? A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization ? Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com ? ?126 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Performance Specifications Series 2 Performance Specifications Durability Mated connectors withstand a minimum of 250 mating Operating Temperature Range cycles for RFI plug (MS3475) and 500 cycles for standard Classes A, L and S*: -55?C to +200?C (-67?F to +392?F) plug (MS3476). Classes W, Z* and BN*: -55?C to +175?C (-67?F to +347?F) Shock and Vibration Requirements Material and Finish Data (Class) Wired, mated connectors shall not be damaged, coupling A ? aluminum shell, black anodized finish (RoHS) ring shall not loosen, and there shall be no interruption of L ? aluminum shell, electroless nickel finish electrical continuity longer than one microsecond when W ? aluminum shell, olive drab cadmium over nickel base subjected to the following: S* ? stainless steel shell, passivated (RoHS) BN* ? aluminum shell, black nickel finish (Aero P/N only) Shock Z* = Aluminum shell, Black Zinc Nickel finish (RoHS) Mated connectors withstand a pulse of approximate half (Aero p/n only) sine wave of 300 G magnitude with duration of three milliseconds applied in each direction of the three major axes. Corrosion Resistance Classes A, S*, W and Z* withstand 500-hour salt spray. Vibration Class BN* withstands 350-hours salt spray. Class L with- Mated connectors withstand the following vibration levels: ? stands 48-hour salt spray. Random vibration per MIL-STD-202, method 214, test condition II, letter J. Environmental Seal Wired, mated connectors with specified accessories at - Shielding Effectiveness tached, shall meet the altitude-immersion test specified in RFI attenuation at the specified frequency meets the require - MIL-DTL-26482 Series 2. ments of MIL-DTL-26482 Series 2. ? RFI shielding effectiveness of mated connectors with Fluid Resistance RFI backshells is measured in a triaxial radio frequency Connectors resist specified immersions in MIL-PRF-7808 leakage fixture. (lubricating oil), MIL-PRF-23699 (lubricating oil), MIL-PRF-5606 (hydraulic fluid), M2-V Chevron oil, Cool - Shell-to-Shell Conductivity ? anol 25, ASTM D4814 (gasoline), SAE-AMS1424 Type I With RFI spring fingers, the maximum potential drop (defrosting fluid), MIL-DTL-5624 (JP-5), and solvents shall not exceed 5 millivolts. ? specified in Method 215 of MIL-STD-202. Without spring fingers, the maximum potential drop shall not exceed 200 millivolts. * Not on QPL, can be supplied to Aero-Electric P/N only. Voltage Rating Suggested Operating Voltage** Test Voltage Test Voltage Test Voltage Test Voltage (Sea Level) Sea Level 50,000 Ft. 70,000 Ft. 110,000 Ft. Service Rating AC (RMS) DC V RMS V RMS V RMS V RMS I 600 850 1,500 500 375 200 II 1,000 1,275 2,300 750 500 200 ** To be used by designer only as a guide. www.conesys.com ? ?127 sales@aero-electric.com 26482 S 2 MIL-DTL-26482 Part Number Development Series 2 Military and Aero-Electric Part Number Development Mil. Prefix MS34 70 L 12 - 10 P W Aero Prefix AE7 70 L 12 - 10 P W -340 Shell type 70 = Narrow flange receptacle 71 = Cable connecting receptacle 72 = Wide flange receptacle 74 = Jam nut receptacle 75 = RFI grounding plug 76 = Straight plug Class (Material and Finish) A = Aluminum shell, black anodized finish (not available in RFI plug) (RoHS) L = Aluminum shell, electroless nickel finish W = Aluminum shell, olive drab cadmium over electroless nickel base S* = Stainless steel shell, passivated (Aero part number only) (RoHS) BN* = Aluminum shell,Black Nickel finish, (RoHS), (Aero part number only) (N/A for AE775) Z* = Aluminum shell, Black Zinc Nickel finish (RoHS) (Aero p/n only) (N/A for AE775) Shell Size 08, 10, 12, 14, 16, 18, 20, 22 or 24 *Size 8 connectors must be marked 08 Insert Arrangement See pages 125 thru 126 Contact Style P = Pin S = Socket A = Pin connector less pins (with intent to use non-std contact) B = Socket connector less sockets (with intent to use non-std contacts) Polarization N = Normal (not included in part number) W, X, Y or Z = Alternate insert polarizations (see pages 123 for position availability) Modification (applies to Aero part numbers only) 01 = Less contacts (is not marked on the part) 340 = Connector kitted with M85049/31-XXX E-nut 341 = Connector kitted with M85049/52-1-XXX straight clamp 342 = Connector kitted with M85049/51-1-XXX right angle clamp Consult factory for other modifications *?Not on QPL, can be supplied to Aero part number only. Consult factory for availability. Note 1: Each connector is furnished with contacts unless Note 2: Insert layouts 8-2, 8-3 and 8-4 can only be ordered ordered less contacts (L/C) as follows: One spare contact for to Aero-Electric part number. Non standard contacts are inserts requiring 2 to 26 of each contact and two spares for required and to avoid confusion are sold ?with contacts? inserts with 27 or more of each size, and a minimum of one only. See page 121 for the correct contact part numbers. sealing plug up to 15% of the number of contacts. In addition, one plastic insetion/removal tool of each size is included. www.conesys.com ? ?128 sales@aero-electric.com

Tariff Concession Code
Tariff Desc

9706627
8536.69.90 CONNECTORS, electrical, being ANY of the following:
(a) rectangular rack and panel;
(b) cylindrical; or
(c) RF coaxial
and manufactured in accordance with ANY of the following military Specs
MIL-C-8384, MIL-C-21671, MIL-C-26518, MIL-C-28731, MIL-C-28748,
MIL-C-28804, MIL-C-81659, MIL-C-83527, MIL-C-83733, MIL-C-85028,
ARINC 600, ARINC 404
Cylindrical connectors
MIL-C-85049, MIL-C-5015, MIL-C-10544, MIL-C-12520, MIL-C-22249,
MIL-C-22539, MIL-C-22992, MIL-C-24217, MIL-C-25955, MIL-C-26482,
MIL-C-26500, MIL-C-83723, MIL-C-27599, MIL-C-28840, MIL-C-38300,
MIL-C-38999, MIL-C-55116, MIL-C-55181, MIL-C-55243, MIL-C-81511.
MIL-C-81703, MIL-C-83723, NAS 1599
RF coaxial connectors
MIL-A-55339, MIL-C-3643, MIL-C-3650, M26637/1, M26337/2, M39012/07,
M39012/08, M39012/09, M39012/10, M39012/11, M39012/12,
M39012/14, M39012/18,
M39012/20, M39012/23, M39012/24,
M39012/29, M39012/30,
M39012/33, M39012/34, M39012/35, M39012/36, M39012/37,
M39012/38, M39012/39, M39012/40, M39012/41, M39012/42, M39012/43,
M39012/44, M39012/45, M39012/46, M39012/47, M39012/48, M39012/49,
M39012/55, M39012/56, M39012/57, M39012/58, M39012/60, M39012/61,
M39012/62, M39012/63, M39012/64, M39012/65, M39012/66, M39012/67,
M39012/68, M39012/69, M39012/70, M39012/71, M39012/73, M39012/74,
M39012/75, M39012/76, M39012/77, M39012/79, M39012/80, M39012/81,
M39012/82, M39012/84, M39012/85, M39012/86, M39012/87, M39012/88,
M39012/89, M39012/90, M39012/91, M39012/92, M39012/93, M39012/94,
M39012/95, M39012/96, M39012/100, M39012/101, M39012/102,
M39012/103, M39012/104, M3655/01, M3655/02, M3655/04, M3655/05,
M3655/06, M3655/07, M3655/08, M3655/09, M3655/10, M3655/11,
M3655/12, M3655/13, M3655/14, M3655/15, M3655/16, M3655/17,
M3655/18, M3655/19, M3655/20, M3655/21, M3655/22, M3655/23,
M35516/16, M25516/17, M25516/18, M25516/19, M25516/20, M25516/21,
M25516/22, M25516/25, M25516/27, M25516/28, M25516/29, M27434/5,
Op. 01.07.1997 Dec. 19.08.1998 - TC 9706627
Aero
Aero Conesys
AERO ELECTRIC
AERO ELECTRIC CONNECTOR INC
Conesys