CS42516 110 dB, 192-kHz 6-Ch CODEC with S/PDIF Receiver Features General Description Six 24-bit D/A, two 24-bit A/D Converters The CS42516 provides two analog-to-digital and six digital-to-analog delta-sigma converters, as well as an 110 dB DAC / 114 dB ADC Dynamic Range integrated S/PDIF receiver. -100 dB THD+N The CS42516 integrated S/PDIF receiver supports up System Sampling Rates up to 192 kHz to eight inputs, clock recovery circuitry and format auto- detection. The internal stereo ADC is capable of inde- S/PDIF Receiver Compatible with EIAJ pendent channel gain control for single-ended or CP1201 and IEC-60958 differential analog inputs. All six channels of DAC pro- Recovered S/PDIF Clock or System Clock vide digital volume control and differential analog Selection outputs. The general-purpose outputs may be driven 8:2 S/PDIF Input MUX high or low, or mapped to a variety of DAC mute con- trols or ADC overflow indicators. ADC High-Pass Filter for DC Offset Calibration The CS42516 is ideal for audio systems requiring wide Expandable ADC Channels and One-Line dynamic range, negligible distortion and low noise, such Mode Support as A/V receivers, DVD receivers, and digital speakers. Digital Output Volume Control with Soft Ramp The CS42516 is available in a 64-pin LQFP package in Digital 15 dB Input Gain Adjust for ADC Commercial (-10 to +70 C) grades. The CDB42518 Customer Demonstration board is also available for de- Differential Analog Architecture vice evaluation. Refer to Ordering Information on Supports Logic Levels between 1.8 V and 5 V page 90. TXP VARX AGND LPFLT DGND DGND VD VD RXP0 INT RXP1/GPO1 RXP2/GPO2 C&U Bit RST RXP3/GPO3 Control Data Buffer AD0/CS Clock/Data S/PDIF RXP4/GPO4 Port Rx AD1/CDIN RXP5/GPO5 Recovery Decoder SDA/CDOUT Format RXP6/GPO6 SCL/CCLK Detector RXP7/GPO7 VLC GPO OMCK MUTEC MUTE Mult/Div RMCK Internal MCLK FILT+ Serial VQ Ref SAI LRCK DEM Audio REFGND SAI SCLK Interface VA SAI SDOUT Port AGND VLS AINL+ ADC 1 Digital Filter Gain & Clip ADC AINL- ADCIN1 Serial ADCIN2 AINR+ Data ADC 2 Digital Filter Gain & Clip AINR- CX SDOUT CX LRCK AOUTA1+ DAC 1 AOUTA1- CX SCLK AOUTB1+ CX SDIN1 DAC 2 AOUTB1- CX SDIN2 AOUTA2+ CODEC DAC 3 CX SDIN3 AOUTA2- Serial Port AOUTB2+ DAC 4 AOUTB2- AOUTA3+ DAC 5 AOUTA3- AOUTB3+ DAC 6 AOUTB3- Copyright Cirrus Logic, Inc. 2014 MAR 14 (All Rights Reserved) DS583F2 CS42516 TABLE OF CONTENTS 1. CHARACTERISTICS AND SPECIFICATIONS ...................................................................................... 6 SPECIFIED OPERATING CONDITIONS ............................................................................................... 6 ABSOLUTE MAXIMUM RATINGS ......................................................................................................... 6 ANALOG INPUT CHARACTERISTICS .................................................................................................. 7 A/D DIGITAL FILTER CHARACTERISTICS .......................................................................................... 8 ANALOG OUTPUT CHARACTERISTICS .............................................................................................. 9 D/A DIGITAL FILTER CHARACTERISTICS ........................................................................................ 10 SWITCHING CHARACTERISTICS ......................................................................................................11 SWITCHING CHARACTERISTICS - CONTROL PORT - IC FORMAT ........................................... 12 SWITCHING CHARACTERISTICS - CONTROL PORT - SPI FORMAT .......................................... 13 DC ELECTRICAL CHARACTERISTICS .............................................................................................. 14 DIGITAL INTERFACE CHARACTERISTICS ....................................................................................... 15 2. PIN DESCRIPTIONS ............................................................................................................................ 16 3. TYPICAL CONNECTION DIAGRAM ............................................................................................. 19 4. APPLICATIONS ................................................................................................................................... 20 4.1 Overview ......................................................................................................................................... 20 4.2 Analog Inputs .................................................................................................................................. 20 4.2.1 Line-Level Inputs ................................................................................................................... 20 4.2.2 High-Pass Filter and DC Offset Calibration ........................................................................... 21 4.3 Analog Outputs ............................................................................................................................... 21 4.3.1 Line-Level Outputs and Filtering ........................................................................................... 21 4.3.2 Interpolation Filter .................................................................................................................. 21 4.3.3 Digital Volume and Mute Control ........................................................................................... 22 4.3.4 ATAPI Specification ............................................................................................................... 22 4.4 S/PDIF Receiver ............................................................................................................................. 23 4.4.1 8:2 S/PDIF Input Multiplexer ................................................................................................. 23 4.4.2 Error Reporting and Hold Function ........................................................................................23 4.4.3 Channel Status Data Handling .............................................................................................. 23 4.4.4 User Data Handling ............................................................................................................... 23 4.4.5 Non-Audio Auto-Detection ..................................................................................................... 23 4.5 Clock Generation ............................................................................................................................ 24 4.5.1 PLL and Jitter Attenuation ..................................................................................................... 24 4.5.2 OMCK System Clock Mode ...................................................................................................25 4.5.3 Master Mode ......................................................................................................................... 25 4.5.4 Slave Mode ........................................................................................................................... 25 4.6 Digital Interfaces ............................................................................................................................. 26 4.6.1 Serial Audio Interface Signals ............................................................................................... 26 4.6.2 Serial Audio Interface Formats .............................................................................................. 28 4.6.3 ADCIN1/ADCIN2 Serial Data Format .................................................................................... 31 4.6.4 One-Line Mode (OLM) Configurations .................................................................................. 32 4.6.4.1 OLM Config 1 ........................................................................................................... 32 4.6.4.2 OLM Config 2 ........................................................................................................... 33 4.6.4.3 OLM Config 3 ........................................................................................................... 34 4.6.4.4 OLM Config 4 ........................................................................................................... 35 4.6.4.5 OLM Config 5 ........................................................................................................... 36 4.7 Control Port Description and Timing ............................................................................................... 37 4.7.1 SPI Mode ............................................................................................................................... 37 4.7.2 IC Mode ................................................................................................................................ 38 4.8 Interrupts ........................................................................................................................................ 39 4.9 Reset and Power-Up ...................................................................................................................... 39 4.10 Power Supply, Grounding, and PCB Layout ................................................................................ 39 5. REGISTER QUICK REFERENCE ........................................................................................................ 41 2 DS583F2