Product Information

PM-14

PM-14 electronic component of CEBEK

Datasheet
Vox Control w/Microphone Pre Assembled Module Board

Manufacturer: CEBEK
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 27.5184 ea
Line Total: USD 27.5184

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

PM-14
CEBEK

1 : USD 29.7199

     
Manufacturer
Product Category
Brand
Kit Application Type
Kit Contents
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
Image Description
F-596-C electronic component of Waldom F-596-C

4 X 1/2 PAN HEAD SCREW
Stock : 1

RVUVK105CH020BW-F electronic component of Taiyo Yuden RVUVK105CH020BW-F

CAP, HIGH FREQ, 0402, 50V, C0H
Stock : 1

MPZ2012-KIT electronic component of TDK MPZ2012-KIT

C216-005
Stock : 1

RVEVK105CH3R9JW-F electronic component of Taiyo Yuden RVEVK105CH3R9JW-F

CAP, HIGH FREQ, 0402, 16V, C0H
Stock : 1

RMJMK063BJ224MP-F electronic component of Taiyo Yuden RMJMK063BJ224MP-F

CAP 0.22UF 6.3VDC X5R 20% SMD 0201
Stock : 1

RMUMK105CG3R9CV-F electronic component of Taiyo Yuden RMUMK105CG3R9CV-F

CAP, MLCC, 0402, 50V, C0G, 3.9
Stock : 1

OSTOQ025350 electronic component of On Shore Technology OSTOQ025350

Conn Shrouded Header (4 Sides) HDR 2 POS 5.08mm Solder ST Thru-Hole
Stock : 1

F-465-C electronic component of Waldom F-465-C

F465C waldom
Stock : 1

F-524-C electronic component of Waldom F-524-C

F524C waldom
Stock : 1

F-040-C electronic component of Waldom F-040-C

F040C waldom
Stock : 1

VOX CONTROL WITH MICROPHONE PM-14 TECHNICAL CHARACTERISTICS Voltage............................................................ 12 V. D.C. Minimum Consumption................................... 2 mA. Maximum Consumption.................................. 60 mA. Frequencies margin........................................ 30 - 17.000 Hz. Protection against Inversion Polarity (P.I.P).... Yes. Sizes................................................................ 77 x 43 x 30 mm. The PM-14 module is a switch activated by sound with an incorporated microphone. When the module receives a signal it connect the relay output, durin gall receiving the time. It includes adjustment potentiometer, indicator Led, microphone and connection terminals. POWER SUPPLY AND INSTALATION POWER SUPPLY : The PM-14 circuit had to be supplied by a 12 VDC power supply correctly filtered.We recommend you to use the FE-2 power supply whichhas been developed to perfectly answer to the circuit needs. Install a fuse and a switchhas it is indicated on the schedule. Both are necessary for the module s protection as well as for your own safety, as its required by theC regulations. Connect the positive and the negative of the power supply to the respective positive and negative terminals of the module, indicated in the wiring map. The distance between the power supply and the module has to be as short as possible. Verify that the assembly is correct. NOTE : Connections indicated as 230 VAC in the wiring map have to be connected to 110 VAC. in Americans countries. Cebeks Modules and/or transformers will be supplied with corresponding modifications for their connection in these countries. OUTPUT CONNECTION LOAD : The PM-14 output is controlled by a relay, and accept any device up to 5 A. The relay is not a component supplying voltage but its function is limited to accept or deny the voltage passage like a standard switch. For this reason, you have to supply the load through this component. The relay has three output terminals: The normally open quiescent (NO), the normally closed quiescent (NC) and the common. Install it between the Common and the NO in accordance with the scheduleOutput Connection. Loa. For the inverse function you have to place the load between the NC and Common. INFORMATION ABOUT THE OUTPUT : During the operating mode and according to its load, it could happen a fluctuation or incorrect wor king of the output. In such case, you have to install an anti-spark circuit between both contacts of the used relay, as it is indicated on the schedule www.cebek.com - sat cebek.comPM-14 INSTALLATION. Install this module into a metallic enclosure correctly ventilated. Connect the ground of the circuit to the chassis of the enclosure and keep enough distance with others modules OPERATING MODE. Once the installation done, you could activate the Vox Control module. Eacht ime you supply the module, the relay will be momentary connected. This activation could not be eliminated becauseit is necessary for the modules tarting. After activating the module, each time the microphone will receive (catch) a signal it connect the output,maintain this state during the signal reception. If you wish to adjust the module s sensitivity to allow the PM-14 module be activated from a determined signal level, you have to adjust it using the potentiometer indicated on the General Wiring Map. IMPORTANT : The union cable between microphone and circuit could be cut, extended, or changed. If you don t respect this point, the module could be damaged and the warranty will be automatically cancelled. GENERAL WIRING MAP www.cebek.com - sat cebek.com

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted