Models 5711, 5713 & 5715
Pomona
Pomona JEDEC Test Clips
.025 Lead Pitch
These new test clips provide the user with an
easy means to connect instrumentation to the
fine pitch plastic QFP chip leads.
Interfaces with high density JEDEC PQFP
chip leads.
Locking feature insures positive retention on
the chip in either vertical or horizontal
position.
Two templates are included for pin
numbering. One template is for pin #1 top
left, the other is for pin #1 top center.
Gold plated contacts for the chip leads and
the connector pins assure noise free
connection.
Pomona's JEDEC test clips are perfect for
emulation, field service testing, failure analysis,
and for use with logic analyzers. The patented
locking mechanism holds the clip on the device
by gripping the chip body at the end of each
lead pattern.
Each contact is individually cantilevered to assure positive contact. These clips must use flying leads that are no more
than .075" Dia. Pomona 5746, (.075" diameter) flying leads, are available in ten colors. Three other types of interfaces
are available for connection to your instruments.
See Pomona's full line catalog for complete details. Other clips are available in many sizes to fit the most popular chips
now in use.
Model Number No. of leads Minimum Board Space Required (A)
5713 100 .98" SQ.
5711 132 1.14" SQ.
5715 196 1.81" SQ.
All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99 PomonaACCESS 90321 (800) 444-6785 or (425) 446-6010
SY/EH/LS More drawings available at www.pomonaelectronics.com
C:\Laura Goldberg\FlukeDataSheet\d5711_13_15_1_01.doc Page 1 of 1
Sales: 800-490-2361 Fax: 888-403-3360
Technical Assistance: 800-241-2060