IFB122-FL-DC

IFB122 Robust RISC-based DIN-rail Fanless Embedded System with i.MX 6UL Processor, 2 COM, 2 LANs and DIO (2-in/1-out) Features RISC-based (i.MX 6UltraLite) processor 528 MHz Reset button LED indicator for system 256MB DDR3 SDRAM onboard status 4GB eMMC flash onboard 2 x LAN LED indicators for user 1 PCI Express Mini Card slot (Wi-Fi or 3G/4G) programming 2 digital inputs and 1 digital output Power input range of 9V to 48V DC with terminal block Embedded embedded Linux operating system (Yocto) Fanless and compact design 2 x COM Wide operating temperature range from -40C to +70C Front view DIO (2-in/1-out) & console Fanless Low Power i.MX6UL Ext. Temp IP40 Introduction The IFB122 cost-effective DIN-rail fanless embedded system utilizes the low power RISC- based (i.MX6UL) processor and is designed to withstand temperatures ranging from Console pin -40C to +70C for using in extreme operating environment and industrial automation DI pin Relay pin applications. DO pin Bottom The IFB122 features two RS-232/422/485 serial ports, dual LANs, two digital input channels, one digital output channel, LED for user programming and one eMMC onboard Antenna Antenna 4 GB. Its vertical DIN-rail form factor makes it easy to install the system in a small cabinet. The ready-to-run IFB122 is specially designed for remote control/monitoring management applications like unmanned control room, industrial machine, automatic parking lot, traffic cabinet and more. Specifications USB Power input Construction Extruded aluminum and heavy-duty steel, IP40 Rear view Top view CPU NXP i.MX 6UL processor, ARM Cortex-A7 528 MHz System Memory 1 x DDR3-1600 onboard, 256 MB Watchdog Timer WDT 1: 0.5 to 128 sec. with a time resolution of 0.5 sec. System I/O Outlet Serial Port 2 x RS-232/422/485 LEDs 1 x LED for power status 1 x LED for reset status LAN 2 x 10/100 Mbps Ethernet 4 x LED (programing by client) Magnetic isolation protection 1.5KV Storage 1 x eMMC 4GB flash onboard Relay 1 x Relay Power Supply 9 to 48 VDC power input range USB 1 x USB 2.0 Operating Temperature -40C to +70C (-40F to +158F) DIO 1 x DIO (2-in/1-out) DI: Wet Storage Temperature -45C to +85C (-49F to +185F) DO: Wet Humidity 10% to 95% DI: Vibration Endurance 5 Gms (10 to 150Hz random operation) Digital input levels for wet contacts: Dimensions 31 mm (1.22 ) (W) x 100 mm (3.94 ) (D) x 125 mm (4.92 ) (H) -Logic level 0: Close to GND Weight (net/gross) 0.3 kg (0.66 lb)/0.44 kg (0.97 lb) -Logic level 1: +0.7 to +24 V max. DO: Installation DIN-rail, wall mount Output channels: 1, sink type OS Linux OS : Yocto 1.8.1 (Fido) Output current: max. 200 mA per Kernel: 3.14.52 channel Certifications FCC part 15, Heavy Industrial CE On-state voltage: 24 VDC nominal, open Console Port Yes For user setting with debug RTC Battery onboard Provides power for the internal real time clock & calendar EEPROM 1 x EEPPROM (2 Kb) Wireless 1 x PCI Express Mini Card slot (USB signal only) 1 x SIM card socket 237 * All specifications and photos are subject to change without notice. www.axiomtek.com 2021 Axiomtek Co., Ltd. All rights reserved.DIN-rail Embedded Systems Ordering Information Standard IFB122-FL-DC Robust DIN-rail fanless embedded system with i.MX 6UL (P/N: E26V122100) processor, 2 COM, 2 LANs and DIO (2-in/1-out) (-40C to +70C) Optional Wall mount kit Wireless (3G/GPS or Wi-Fi) module Packing list 1 x CD 4 x Screws 1 x Din-rail kit 1 x Console cable 1 x 3-pin terminal block for power port 1 x 10-pin terminal block for DIO port * Specifications and certifications may vary based on different requirements. 1 2 3 4 Dimensions 5 6 7 8 9 10 238 * All specifications and photos are subject to change without notice. www.axiomtek.com 2021 Axiomtek Co., Ltd. All rights reserved.